Tender For Estimate For Renovation Of Canal Rest House And Parking Shed In The Office Complex Of Hoshiarpur Canal And Dam Circle
Tender Value
53.80 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
7 days left
EMD
1.07 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshiarpur → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Renovation Of Canal Rest House And Parking Shed In The Office Complex Of Hoshiarpur Canal And Dam Circle
BOQ
| Sl. No. | Item Description |
| 1 | Stripping and stacking slate or tiles of a roof. |
| 2 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. ((a)) Doors of area 3 sqm and below. |
| 3 | Scraping ((a)) White wash and colour wash |
| 4 | ((g)) Tiles dismantled from the work in lime or cement |
| 5 | Terracing consiting of tiles 22.86x 11.43x 3.83 cm laid over 25mm mud plaster 7.5cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65Kg. /Sqm top of R.C.C. slab including grouting with cementsand mortar 1:4 and top surface to be left clean after wire brushing |
| 6 | Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 |
| 7 | Applying bitumen on roof including heating and carrying to roof. |
| 8 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall wall finished smooth, where specially specified. |
| 9 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes single socketed (working pressure 4 kgf/cm2) conforming to IS : 4985, including fixing with MS clamps (I) U-PVC pipes (working pressure 4 kgf. / sqcm) pipe 110 mm dia. |
| 10 | Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal ofunserviceable material to the dumping ground within 50 m lead (The cost of new tiles or bricks excluded). |
| 11 | Providing and fixing mineral fibre false ceiling tiles at heights upto 4 mtr With 16 mm thick beveled tegular mineral fibre Anti-microbial false ceiling tile of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. |
| 12 | Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete |
| 13 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade |
| 14 | Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. |
| 15 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. |
| 16 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 17 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 18 | Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface |
| 19 | Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. (a)) Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity (without cistern fitting) size 62x37x67 cm with P trap or S trap and seat cover complete in all respect. |
| 20 | (6 (B) (i)) Providing and fixing vitreous Chinware chinware 10 Ltr. Capacity with PVC internal fitting (Size 34.x 50 x 22.5 cm) of approved make(to the approval of the Engineer-in-charge) including PVC fittings and brackets complete. |
| 21 | ((iii)) Providing and fixing PVC accessory fittings in Chinaware flushing cistern 10 Litres capacity complete. |
| 22 | Providing and fixing jet spray with 2-6\\" long PVC pipe. (a)) With C.P. Brass nut |
| 23 | Providing and fixing in osition vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete. |
| 24 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 25 | Providing and fixing C.P. brass Urinal Spreader Ocular-Regular complete with fittings for urinals complete. |
| 26 | Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect. (c)) Water Cooler Semi Steel Body 80/120 ltr Capacity without Stablizer |
| 27 | Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35 Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in positioncomplete in all respect. |
| 28 | Providing and fixing in position C.P. brass bottle trap 32mm dia with 40 mm seal of approved make (to the approval ofEngineer-in-charge) complete in all respect. |
| 29 | Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 30 | Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect. ((a)) C.P. brass toilet paper holder |
| 31 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. ((a)) C.P. brass towel Rails size 15mm dia 610mm long |
| 32 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed intowall with rawl plugs and C.P brass screws complete in all respect. |
| 33 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) ((a)) Size 600mmx450mm |
| 34 | Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect. ((c)) C.P. Brass khunti with 6 pegs |
| 35 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval ofEngineer-in-charge )with various fixtures complete in all respect. (i)) C.P. Brass extension piece,25mm long to 50mm long |
| 36 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 37 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. ((i)) C.P. brass Bib cock long nose/ long body foam flow without flange |
| 38 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. ((b)) C.P.brass 15mm Concealed stop cock with flange. |
| 39 | ((c)) C.P.brass 15mm Angle valve without flange |
| 40 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. ((a)) PVC tube connection of size 15 mm x 300 mm with C.P. Brass nut |
| 41 | Providing & fixing in position C.P. copper tube connection of approved make (to the approval ofEngineer-in-charge ) complete in all respect. ((c)) C.P. copper tube connection of size 15 mm x 600 mm with C.P. Brass nut |
| 42 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. ( A) Single Socket Type A (b) 110mm o/d single socket SWR UPVC pipe lines laid complete |
| 43 | Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge) ((a)) 160mm o/d |
| 44 | ((b)) 110mm o/d |
| 45 | ((c)) 90mm o/d |
| 46 | ((d)) 75mm o/d |
| 47 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. (B) For 110mm o/d pipes (vi) Vent Cowls |
| 48 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealingof all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 49 | Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr complete in all respect as required by Engineer-in-Charge. ((a)) Eurpoean/Indian/Orissa W.C., |
| 50 | Providing and fixing in position automatic brass Ball Cock in tanks. (B) Brass Ball Cock with rod and Plastic Ball ((iii)) 25mm i/d |
| 51 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. ((i)) Triple Layer Tanks |
| 52 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. ((c )) G.I. tank nipple 25mm i/d |
| 53 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. |
| 54 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) (a) Size 600x600 mm |
| 55 | Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. (a) Size 600x600 mm. |
| 56 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 57 | Teak wood doors shutter and windows panelled glazed or panelled including Iron hinger, screws etc. complete fixed in position (excluding cost of tower bolts and handles but including labour for fittings the same) (Single Leaf) ((b)) 30mm thick |
| 58 | Teak wood chowkats including iron hold fasts, corner straps, iron hinges, cleats, stops, wooden knobs or handles fixed in position. (A) Single Rebate (60mm x 100mm) |
| 59 | (B) Double Rebate (60mm x 150mm) |
| 60 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 ((a)) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- ((iv)) 35mm thick |
| 61 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete ((c)) I.S.I Designation No. III (size of door 851mm to 1000mm) |
| 62 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately) : ((a)) For fixed portion and chawkhats |
| 63 | ((b)) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required |
| 64 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P.brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Pre-laminated particle board with decorative lamination on one side. |
| 65 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (A) 300mm x 16mm |
| 66 | (B) 250mm x 16mm |
| 67 | Providing and fixing aluminum Wire Mesh including cost of necessary fittings i.e. screws,u Type Beading etc. complete |
| 68 | RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½\\" deep for walls and 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface) ((i) a) Wiring fan point (Without fan box) |
| 69 | ((ii)) Wiring light point |
| 70 | ((iii)) Wiring call-bell point |
| 71 | ((iv)) Wiring 6Amp. Wall socket point |
| 72 | ((vi)) Wiring 16/20Amp. power plug control point |
| 73 | ((ix)) RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- ((a)) Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter25Amp. erected at switchboard height. |
| 74 | PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- ((i)) Overall size 1sq.mm (Un-sheathed) |
| 75 | ((ii)) Overall size 1.5sq.mm (Un-sheathed) |
| 76 | ((iii)) Overall size 2.5sq.mm (Un-sheathed) |
| 77 | ((iv)) Overall size 4sq.mm (Un-sheathed) |
| 78 | ((v)) Overall size 6sq.mm (Un-sheathed) |
| 79 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- ((ii)) Heavy Gauge PVC Conduit Pipe 25mm dia. (OnSurface) |
| 80 | MINIATURE CIRCUIT BREAKERS/ RCBO‘s/ RCCB‘s: (34.16 A) MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB‘s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs: - ((ii)) MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 81 | ((vi)) MCB Double Pole 6-32amp. (10kA, Curve-C) |
| 82 | ((xii)) MCB Triple Pole 50, 3amp. (10kA, Curve-C) |
| 83 | ((xvi)) MCB Four Pole 50, 63amp. (10kA, Curve-C) |
| 84 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB‘s/ RCBO‘s/ RCCB‘s: Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO‘s/ RCCB‘s in the distribution board (For SP&N distribution board with provision DP MCB‘s/ RCCB‘s/ RCBO‘s as incomer and SP MCB‘s as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB‘s/ RCCB‘s/ RCBO‘s as incomer and SP MCB‘s as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- ((ii)) SP&N Double Door Distribution Board 8 way each |
| 85 | ((iii)) SP&N Double Door Distribution Board 12 way each |
| 86 | ((ix)) TP&N Vertical Double Door Distribution Board 4 way each |
| 87 | GI PIPE POLES & BRACKETS: (34.29 A) GI PIPE POLES: Supply and erection of G.I. pipe ‘A’ quality of suitable length and dia. confirming to IS:1239 (Part-I) 1979, including fixing up to a given depth below G/L, the hole of excavation about 30cm dia. and given depth to be filled in up to 15cm below G/L with 1:2:4 cement concrete including painting of pole with two coats of approved aluminium paint as required:- ((ii)) G.I. Pipe Pole 6.1 metre Long, Dia. 80mm, Planting Depth 120cm with Pit Depth135cm. |
| 88 | SINGLE ARM BRACKETS FOR GI PIPE POLE: ((ii)) Supply and erection of G.I. Pipe (A-Class) Single arm bracket of suitable length to give a total overhang at a tentative angle of 100/105º, the bracket should be fixed on the existing surface/ wall with 2nos. MS flat clamp 25mm x 5mm, 30cm long and 4nos. fastner 10mm x 75mm long with two coats of an approved aluminium paint complete in all respect as approved by the Engineer-in-charge at site:- ((a)) Single Arm Bracket 1 metre Long G.I. Pipe 40mmDia. |
| 89 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. In Ordinary soil (A) Manual Means (a) Depth upto 3 m |
| 90 | Cement concrete 1:2:4 (a) With stone ballast or shingle (i) mixing by manual means |
| 91 | HOISTING, ROOFING AND WATER PROOFING (13.27 (iii)) Providing and fixing ( PPGL) precoated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti cappillary groove and return leg. The steel sheet must be having yield strength of 550 MPa ( Fy= 550 MPa) metallic coated with Zinc- Aluminium alloy ( i.e. 55% Al, 43.4% Zinc, 1.6% Si-Zincalume) AZ150 ( Min. 150 bm/mm2 total on both sides), pre painted with super Durable Polyster XRW quality paint includes inorganic infrared reflective pigment. The sheet confirms to general requirement of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25%-40%. should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size(5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. ((a)) 0.50 mm (+ 0.05 %) thick |
| 92 | Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointin (a) UPVC 110 mm bend |
| 93 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing inposition |
| 94 | Painting two or more coats with anticorrosive bitumastic Paint to give an even shade |
| 95 | Providing and installation of 2.0 TON split AC General make 24BUTVA |
| 96 | Providing and installation of 1.5 TON split AC General make 18BMAA |
| 97 | Providing and installation of stabilizer V-Guard make VNS 500 2TR |
| 98 | Providing and installation of stabilizer V-Guard make VNS 400 1.5TR |
| 99 | Providing of stand |
| 100 | Providing and installation of Geyser 25 Litres V-Guard make |
| 101 | Providing and installation of RO livpure make bolt copper |
| 102 | Providing and fitting of box bed |
| 103 | Providing of bed matteress comfort foam |
| 104 | Providing of wardrobe size 6x2x7 with dressing table made with HDMR board |
| 105 | Providing of dining table with ten comfortable chair set |
| 106 | Providing centre Table with glass size 4x2 |
| 107 | Providing visitor chair/bench |
| 108 | Poviding tv panel size 43\\" |
| 109 | Proving of crockery almirah made with HDMR board with glass size 78\\"x18\\"x78\\" |
| 110 | Providing of blanket single bed superior executive class |
| 111 | Providing of blanket single bed superior executive class |
| 112 | Providing of double bed sheet executive class superior quality |
| 113 | Providing of Cutains 7 ft superior quality |
| 114 | Providing of Cutains 9 ft superior quality |
| 115 | Providing and fixing of curtain rods and accessories |
| 116 | Providing of Amaze tubular 12v 200 Ah Battery |
| 117 | Providing of Amaze home UPS 24 volt-1675 |
| 118 | Providing of battery stand |
| 119 | Labour and fitting charges of invertor |
| 120 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes (as per IS:15801-2008) SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c trenching .refilling & testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall (c)) PN- 16 Pipe, 25 mm o/d |
| 121 | Any other CSR Item Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender