Tender For Laying Tiles On Stairs Of Typ-Ii Qtr And Repair Of Plinth Protection Of Ty-Ii, Ty-Iii & Ty-Iv Qtrs And Other Minor Repair Works At Rajiv Nagar Under Ae-Ii,Svpsd,Apwd. (Lok Niwas Qtrs Complex)
Tender Value
24.06 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
0 days left
EMD
48121
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Laying Tiles On Stairs Of Typ-Ii Qtr And Repair Of Plinth Protection Of Ty-Ii, Ty-Iii & Ty-Iv Qtrs And Other Minor Repair Works At Rajiv Nagar Under Ae-Ii,Svpsd,Apwd. (Lok Niwas Qtrs Complex)
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 2 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 4 | All kinds of soil. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 6 | 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 7 | 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 9 | 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 11 | Foundations, footings, bases for columns |
| 12 | Providing and laying matt finished vitrified tile of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
| 13 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 14 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 15 | Electric resistance or induction butt welded tubes |
| 16 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: |
| 17 | Two or more coats on new work |
| 18 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 19 | 15 mm nominal bore |
| 20 | Providing and fixing PTMT pillar cock of approved quality and colour. |
| 21 | 15 mm nominal bore, 107 mm long, weighing not less than 110 gms |
| 22 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 23 | With cement mortar 1:4 (1 cement : 4 fine sand) |
| 24 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. |
| 25 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 26 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 27 | Providing cement concrete surface drain with 1:3:6 (1: Cement 3: Coarse sand 6: Stone aggregate 40mm nominal size) finished with 12 mm thick cement plaster 1:4 (1: Cement 4: fine sand) including floating coat of neat cement inside the drain and its top and exposed surface, including earthwork in excavation and dispose of surplus earth etc. complete :a) 23 x 23 cm |
| 28 | Providing and fixing PVC Pipe 6kg/cm2 with necessary clamps screws etc all complete as per the direction of Engineer-In-charge. |
| 29 | 110 mm dia PVC Pipe |
| 30 | Providing and fixing PVC Pipe 6kg/cm2 with necessary clamps screws etc all complete as per the direction of Engineer-In-charge. |
| 31 | 65 mm dia PVC Pipe |
| 32 | Providing and fixing PVC (SWR) moulded fittings / accessories for PVC pipes including jointing with solvent : PVC Door Bend |
| 33 | Door Bend 110 mm |
| 34 | Providing and fixing PVC (SWR) moulded fittings / accessories for PVC pipes including jointing with solvent : PVC Door Bend |
| 35 | Door Bend 75 mm |
| 36 | Providing and fixing PVC (SWR) moulded fittings / accessories for PVC Pipes including jointing with solvent : PVC Plain Tee |
| 37 | 110 mm dia |
| 38 | Providing and fixing PVC (SWR) moulded fittings / accessories for PVC Pipes including jointing with solvent : PVC Plain Tee |
| 39 | 65 mm dia |
| 40 | Providing and fixing PVC (SWR) moulded fittings / accessories for PVC Pipes including jointing with solvent : PVC Plain Bend |
| 41 | 110 mm dia |
| 42 | Providing and fixing PVC (SWR) moulded fittings / accessories for PVC Pipes including jointing with solvent : PVC Plain Bend |
| 43 | 65 mm dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender