Tender For Renovation Of Iei And Replacement Fittings Of The Administration Block Of Mg Govt. College, Mayabunder.
Tender Value
29.29 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
7 days left
EMD
58585
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
North and Middle Andaman → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Iei And Replacement Fittings Of The Administration Block Of Mg Govt. College, Mayabunder.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 2 | Group C |
| 3 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 4 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 5 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 6 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 7 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 8 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 9 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 10 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 11 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 12 | Supplying and fixing brass batten/ angle holder including connection etc. as required. |
| 13 | Erection of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required. |
| 14 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 15 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 16 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. |
| 17 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. |
| 18 | Upto 450 mm sweep |
| 19 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 20 | 6 way (4 + 18), Double door |
| 21 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 22 | Single pole |
| 23 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 24 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 25 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 26 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 27 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 28 | Above 35 sq. mm and upto 95 sq. mm |
| 29 | Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 30 | 3Y X 95 sq. mm |
| 31 | Supplying of 20 Watts ultraslim LED Batten with LED tubes white CDL of make: Eveready or its equivalent to ISI standard. |
| 32 | Supplying of BLCD Ceiling Fan 1200 mm sweep without remote of make: Atomberg Renessa Prime or equivalent to ISI Standard. |
| 33 | Supply of exhaust fan 200mm sweep of make Havells DXW Celso or its equivalent to ISI standard. |
| 34 | Supplying of 20 Watts Bulkhead fitting of make Crompton bearing Id. No. SKU-4044 complete or its equivalent to ISI standard etc. as required. |
| 35 | Supplying and fixing of LED floodlight of capacity 100 Watts of make: Havells or its equivalent to ISI Standard. |
| 36 | Supplying and fixing of wall fan of 400 mm sweep of make: Bajaj Esteem or its equivalent to ISI standard. |
| 37 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, coupers etc. conforming to IS 14930, part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required. |
| 38 | 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 39 | Supplying of following size XLPE insulated heavy duty armoured aluminium conductor UG cable of 1.1 KV grade conforming to IS : 7098 (Part-I) and IS No.: 1554 (Part-I) 1988 as applicable. Make: CCI / Gloster / Havells / Polycab / Finolex etc as required. |
| 40 | 3.5 core x 95 sqmm |
| 41 | Supply, installation, testing and commissioning of following capacity and rating wall mounted split Air conditioner, inverter type fitted with rotary compressor operating on 230v ± 10%, 50Hz single phase AC supply with evaporator and condensing unit made of copper tubes , cordless remote control, copper piping for both suction and discharge of five (05) meters length with protection covering for piping of suitable size of medium PVC pipe, power and control cabling as per site requirement, outdoor stand duly painted, comprising of following etc. complete as per requirement including first charge of refrigerent. a) Insulated copper pipe lines liquid and suction lines as per manufacturer rocommendation.b) Flexible copper cable between indoor & outdoor unit of suitable size as per manufacturer rocommendation. c) Drain pipe.d) Suitable size of PVC pipe for protection covering of refrigent line if required as per direction of E-in-C. |
| 42 | 2.0 Ton capacity 5 star rating |
| 43 | Supplying, installing, testing and commissioning of 5 KVA electronic voltage stabilizer suitable for 2.0 ton Air Conditioner as required equivalent to V-Guard Model No.VG 500 or its equivalent to ISI standard. |
| 44 | Provoding & fixing of pre-fabricated stand for keeping outdoor units of 1.5 Ton/ 2 Ton Capacity split type AC as required. |
| 45 | Supply, installation, testing and commissioning of out door type floor mounted cubical panel Board non-extendable type L.T/3 phase 440 volt 200A with both side open i/c front double hang shutter with locking arrangement made with 2mm thick CRCA sheet, M.S Angle, M.S Flat etc in different compartment to accommodate various, size of switch gear, busbar, MCB, isolator, voltmeter, ammeter, selector switch, cut out, energy meter etc. i/c supplying & fixing of following item i/c interconnection with suitable rating Cu. strip/cable. The panel should have inner earthing 1 coat of primer and 2 coat of finishing water proof paint, fixing of danger plate and PCC work etc. as required.a) MCCB 250 A / TPN 25 KA breaking capacityb) MCCB 200 A / TPN 25 KA breaking capacityc) Off load Change over 200 A d) Cut out 200 Ae) Copper busbar strip 35mmx5mmf) Indicator for RYBg) Digital voltmeter 0-500Vh) Digital Ammeter 0-300 Ai) Digital Ammeter 0-300 Aj) C.T. Coil (200/5)k) Digital Control fusel) Inter connection with suitable size wire/stripm) Fabrication Panel box made out of 2mm CRCA sheet, M.S. Angle, M.S. Flat etc i/c painting with 1 coat steel primer, 2 coat of finishing watern) Installation with PCC work Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender