Tender For Supply, Installation, Testing And Commissioning Of Non-Clogged Submersible Dewatering Pumps For New Inlet Valve Chamber At Daspara Bps
Tender Value
2.32 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
7 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Installation, Testing And Commissioning Of Non-Clogged Submersible Dewatering Pumps For New Inlet Valve Chamber At Daspara Bps
BOQ
| Sl. No. | Item Description |
| 1 | SUPPLY, DELIVERY, TESTING AND COMMISSIONING OF 02 HP CAPACITY SUBMERSIBLE DEWATERING PUMP, DISCHARGE NOT LESS THAN 16 CUM/HR, VOLATGE 415+_10%, 3 PHASE, FREQUENCY 50+_3% HZ, CALBE LENGTH 10 MTRS, MINIMUM HEAD NOT LESS THAN 12 METERS, IP 68 OF (KSB/KIRLOSKAR/MODY/WPIL/KISHORE) MAKE. FAIR RATE APPROVED BY DG WS DATED 17.01.2019 |
| 2 | CHAPTER - VIII SUPPLYING OF MATERIALS 8.9 Cast iron double flanged single door swing Non-Return Valve generally conforming to IS 14846 having body, door cover in graded cast iron to IS 210 Gr. FG 200, body and door rings and bearing block of leaded tin bronze to I.S 318 Gr. LTB 2, hinge pin of ST AISI410 valves suitable for maximum working pressure of 10 kg/cm... and body tested 15 kg/cm.... Diameter in mm 50 |
| 3 | 8.14Cast Iron ball valve (Flange Type) with stainless steel ball & CI body and MS Bolt-nuts and drilling as per specification. Diameter in mm 50 |
| 4 | CHAPTER - VIII SUPPLYING OF MATERIALS E. E. R. W. MS BLACK PIPE 8.15 Sypply of E.R.W.M.S. (Electrical Resistant Welded M.S.) black pipe of ISI Mark as per relevent IS Specification ( heavy quality ) having wall thickness not less than 5 mm. [N.B.: The rates for supply of TATA Make pipe will be arrived at by adding 20% of the corresponding rates ] Diameter in mm (Internal) |
| 5 | CHAPTER - VII MISCELLANEOUS ITEMS Coating of 'Food Gr.Epoxy' Resin of thickness not less than 240 micron with alow-viscosity, crystallization-resistant food grade epoxy resin basewith a reactive diluents combined with high build epoxy amineadducts as per BS 5493 standard and a polyamide or amidopolyamine or any other suitable hardener. It shall react with epoxyresin at normal ambient temperature, suitable for solvent-freecoatings as per recommended proportion for use on metal, concreteand wood surface to protect from corrosion, give anti-fungalproperties ,as per guide line of FDA and USDA as well as damagefrom chemical reaction after making the surface free from dust, oiland moisture etc. all complete as per instruction and to thesatisfaction of ElC. [ This item will be operated on prior permissionfrom the concerned SE/Dy Chief Engineer] |
| 6 | Supplying & Erection of mini size feeder pillar box of Size (918 x 561x 382 mm) made up of 2 mm thick MS Plate along with suitable M.S.Angle. The P.B. have double hinge door at the front & back withsuitable locking arrangement. The box will be painted by 2 cores ofaluminiam paint over 1 coat of red oxide paint. Suitable arrangementshould be provided for fixing of Timer unit, fuse unit & otheraccessories. Leg of the pillar box will be 900 mm in length by madeup of (35 x 35 x 3 mm MS Angle with suitable base Plate. Legs of thePillar box will be erected at 300 mm below the ground level withcement concrete (6:3:1). Rest portion coverd by 5\\" Brick Wall withplastering & net cement & bottom portion filled with silver sand asdrawing & direction of E.I.C |
| 7 | Supply & delivery of the following 50 Hz, AC, Direct on Line Starter ofcontinuous duty in sheet steel enclosure (makeL&T/ABB/SCHNEIDER):7.5 HP Three Phase (Max. Relay range20-32 Amp) |
| 8 | Supplying of 1.1 KV. Grade PVC insulated Conductor of followingcables (make: Polycab/ Gloster/Havells/):Size in Sq. mm, No & dia.of wire in mm , No of Core - 10 1/3.55 4 |
| 9 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. B. REPAIRING 2. Welding in M.S. structural work withgas or electric: (a) Tack weld |
| 10 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. B. REPAIRING 2. Welding in M.S. structural work withgas or electric: (b) Continuous weld. |
| 11 | Sub Total |
| 12 | GST 18% |
| 13 | CESS 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender