Tender For Special Repair/ Replacement Of Ber Pumping Sets At Certain Water Supply Installations, And Provn Of Water Supply System At Environment Park & Training Area At Mamun Mil Stn
Tender Value
43.65 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
4 days left
EMD
87300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair/ Replacement Of Ber Pumping Sets At Certain Water Supply Installations, And Provn Of Water Supply System At Environment Park & Training Area At Mamun Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Supply, installation,commissioning and testing of Submersible pumpset of capacity 30 HP,having minimum 95Mtr Head and discharge of 42 Cubm/hr ,TP, electric driven 415 V, suitable for 200/250 mm dia bore well, complete all as specified and directed. |
| 2 | Supply, installation,commissioning and testing of Submersible pumpset of capacity 25 HP,having minimum 79Mtr Head and discharge of 42 Cubm/hr ,TP, electric driven 415 V, suitable for 200/250 mm dia bore well ,complete all as specified and directed. |
| 3 | Supply and fixing of column pipe Galvanized iron, “Heavy class”, 100mm (4'') dia of length 3 meter each, both ends flanged (suitable for bore well) to be welded including suitable size of nut, bolt, washers, rubber gasket and all conneceted accessories, suitable for submersible borewell complete all as specified and directed. |
| 4 | Supply and fixing 16 Sqmm, 3 core, 1100 Volts, copper conductor flat cable for submersible pump including connecting to motor complete all as specified. |
| 5 | Supply, installation,commissioning and testing of centrifugal pump set of discharge 18000 GPH (82 Cubm/Hrs) @100 Mtr head with suitable capacity 60 HP, 2900 RPM, TEFC Sq cage induction motor suitable for operation on 415 V, 50HZ, 3 phase AC supply motor confirming to IE2 rating, motor, 3 stage fitted with CI casing, Bronze impellers, SS shaft sleeves and couppled on common MS fabricated base frame suitable flexible coupling including all necessary CI/MS fittings and PCC foundation in cement concrete 1:2:4 type B1 including necessary formwork ,complete all as specified and directed. |
| 6 | Supply and laying GI tubings medium grade 80mm bore dia ISI Marked with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches, complete all as specified and directed. |
| 7 | Supply and laying GI tubings 50 mm bore dia medium grade dia ISI Marked with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete, laid in trenches complete all as specified and directed. |
| 8 | Supply and laying GI tubings 40 mm bore dia medium grade dia ISI Marked with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches complete all as specified and directed. |
| 9 | Supply and laying GI tubings 25 mm bore dia medium grade dia ISI Marked with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches complete all as specified and directed. |
| 10 | Supply and laying GI tubings 20 mm bore dia medium grade dia ISI Marked with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches complete all as specified and directed. |
| 11 | Supply and fixing cast iron sluice valve suitable for 80 mm dia pipes conforming to IS - Class PN - 1.6 with flanged ends, MS nuts, bolts, washers etc, including testing and commisioning complete all as specified and as directed. |
| 12 | Supply and fixing gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed suitable for 50mm bore pipe including testing and commisioning complete all as specified and as directed. |
| 13 | Supply and fixing gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed suitable for 40mm bore pipe including testing and commisioning complete all as specified and as directed. |
| 14 | Supply and fixing gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed suitable for 25mm bore pipe including testing and commisioning complete all as specified and as directed. |
| 15 | Supply and fixing gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed suitable for 20mm bore pipe including testing and commisioning complete all as specified and as directed. |
| 16 | M&L for Cutting cast iron/galvanised iron pipes of dia upto 200mm and reducing to required length before laying in position for insertion of new tees,branches, etc.including provision of Tee, bend, union, socket etc complete all as specified and as directed. |
| 17 | M& L for valve pit chamber of brick masonary valve pit of size 30cm x 30cm x 30 cm (internal dimensions) built in cement mortar 1:6,Plain cement concrete,M-10 (nominal Mix) type C-2(using 40mm graded crushed stone aggregate) as in foundation filling and including 15mm thick plastering internally with cement mortar 1:5 and flush pointing externally as the work proceeds in same mortar and plain cement concrete,M-15(nominal mix),type B-1,(using 20 mm graded crushed stone aggregates) as in coping 50mm and earth work in any type of soil including removal to a distance not exceeding 50 mtr,complete all as specified and directed. |
| 18 | M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate in foundation and mass concrete ),complete all as specified and directed. |
| 19 | Excavating in trenches n exe 1.5 m wide and not exceeding 1.5 m in depth getting out hard/dense soil for laying of GI pipe,complete all as specified and directed. |
| 20 | Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm in hard dense soil completge all as specifiedd and directed. |
| 21 | Removing excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 22 | M& L Construction of new brick masonary valve pit of size 90cm x 90cm x 105 cm (internal dimensions) built in cement mortar 1:6, with Plain cement concrete,M-10 (nominal Mix) type C-2(using 40mm graded crushed stone aggregate) as in foundation filling and including 15mm thick plastering internally with cement mortar 1:5 and flush pointing externally as the work proceeds in same mortar and plain cement concrete,M-15(nominal mix), type B-1, (using 20 mm graded crushed stone aggregates) as in coping 50mm thick complete including 3.15 mm thick MS sheet cover, handle, locking arrangement including provision of frame of angle iron 40mmx40mmx6 mm with 15 cm four sides ambedded in PCC for cover and earth work in any type of soil including removal to a distance not exceeding 50 mtr and painting steel surface with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 23 | M& L Construction of new brick masonary valve pit of size 60cm x 60cm x 60 cm (internal dimensions) built in cement mortar 1:6, with Plain cement concrete,M-10 (nominal Mix) type C-2(using 40mm graded crushed stone aggregate) as in foundation filling and including 15mm thick plastering internally with cement mortar 1:5 and flush pointing externally as the work proceeds in same mortar and plain cement concrete,M-15(nominal mix), type B-1, (using 20 mm graded crushed stone aggregates) as in coping 50mm thick complete including 3.15 mm thick MS sheet cover, handle, locking arrangement including provision of frame of angle iron 40mmx40mmx6 mm with 15 cm four sides ambedded in PCC for cover and earth work in any type of soil including removal to a distance not exceeding 50 mtr and painting steel surface with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender