Tender For Renovation Of Cd Type Quarter (Block C) At Old Vidhan Sabha C Us, Dhurwa, Ranchi
Tender Value
81.68 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
2 days left
EMD
1.63 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Cd Type Quarter (Block C) At Old Vidhan Sabha C Us, Dhurwa, Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 2 | Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 3 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 4 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 5 | Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I. |
| 6 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 7 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :- Of area beyond 3 sq. metres |
| 8 | Supplying, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I. |
| 9 | Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 10 | Supplying, fitting and fixing M.S. grill gate with M.S. grill made of 20X6mm M.S. flats or 16mm M.S. square bars fitted on 25X25X6mm M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 11 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 12 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 13 | Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 14 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.- For thickness of tiles 10 mm to 25 mm |
| 15 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1 : 4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, 1 1 .4 1 A.2 Glazed vitrified floor tiles polished finish of size11.41A.1.1 Size of Tile 600 x 600 mm |
| 16 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 1 2 mm thick bed of cement mortar 1 :. 3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 17 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 18 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I. |
| 19 | Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 1 4 , plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with/ without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for (i) Sites with basic wind speed > 45 m/sec as per IS 875 -- Part 3 (ii) Sites with structure height more than 20m for all wind speeds9.147.A4 Three track three panels sliding window with two glazed& one wire mesh panels with Aluminium channel for rollertrack, wool pile, nylon rollers with SS 304 body.9.147.A4.1 Using R2 series with frame (70 mm & above) x(40 mm & above) & both glazed and fly screensash (25 mm & above) x (50 mm & above)with zinc alloy (zamak) powder coated touchlocks with hook. (Height upto 1 . 2 metre). |
| 20 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): - With float glass panes of 4.0 mm thickness (weight notless than 10 kg/ sqm) |
| 21 | Stainless steel wire guage (Grade-304) aperture 1.4 mm and 0.50 mm sqm 445.00 dia wire |
| 22 | Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 23 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) |
| 24 | Providing two coats of synthetic enamel paint of apporoved shade and make over steel surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I. |
| 25 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 26 | 75 mm |
| 27 | 110 mm |
| 28 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 29 | Coupler |
| 30 | 75 mm |
| 31 | 110 mm |
| 32 | Single pushfit Coupler |
| 33 | 75 mm |
| 34 | 110 mm |
| 35 | Single tee with door |
| 36 | 75 mm |
| 37 | 110 mm |
| 38 | Single tee without door |
| 39 | 75 mm |
| 40 | 110 mm |
| 41 | Bend 87.5° |
| 42 | 75 mm |
| 43 | 110 mm |
| 44 | Shoe (Plain) |
| 45 | 75 mm |
| 46 | 110 mm |
| 47 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 48 | 75 mm |
| 49 | 110 mm |
| 50 | Providing 150mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 51 | Providing and fixing Gun metal full way valve of approved quality, all complete as per specification and direction of E/I. |
| 52 | (c) 25mm dia and weight not less than 500gms. |
| 53 | (d) 32mm dia and weight not less than 700gms. |
| 54 | Point wiring in PVC conduit, with modular type switch - Point wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box etc. as required. |
| 55 | Wiring for Curcuit submain wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface of recessed PVC sonduit as required |
| 56 | 2 x 1.5 sq.mm. + 1 x 1.5 sq.mm. earth wire |
| 57 | 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire |
| 58 | 2x4.0 Sqmm + 1x4.0 sqmm earth wire |
| 59 | S/F Modular type switch/socket on the existing switch box including connection etc. as required |
| 60 | 5/6 amps, one way switch |
| 61 | 15/16 amps, one way switch |
| 62 | 5/6 amps, 3 pin socket outlet |
| 63 | 15/16 amps, 6 pin socket outlet |
| 64 | S/F Modular type electronic fan regulator : Supplying and fixing stepped type electronic fan regulator on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 65 | S/F Modular type blanking plate : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modulaS/F Modular boxes, base & cover plate : Supplying and fixing following size / modules , GI box along with modular base & cover plate for modular switches in recess etc as requiredr plate as required. |
| 66 | S/F Modular boxes, base & cover plate : Supplying and fixing following size / modules , GI box along with modular base & cover plate for modular switches in recess etc as required l2 module (l35mm x 205mm x 60mm) |
| 67 | S/F light plug point with modular type accessories : Supplying and fixing suitable GI box with modular plac and cover in front on surface of in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch. corutection, painting etc. as required (For light plugs to be used in non residential buildings) |
| 68 | S/F power plug point with modular type accessories : Supplying and fixing suitable GI box with modular plac and cover in front on surface of in recess, including providing and fxing 6 pin 15/16 amps modular socket outlet and l5/16 amps modular switch. connection, painting letc. as required (For light plugs to be used in non residential buildings) |
| 69 | supplying and fxing 2 pn 5 amp. Ceiling rose on the existing junction box/ l*oo\\"n block including connection etc. as required . |
| 70 | SlF Batten holder : I lsupplying and fixing Batten / Angle holder including connection etc as lrequired. |
| 71 | ITC ceiling fan: Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable etc. as required. |
| 72 | S.I.T.C of floowing rating reccess/surface mounted LED round/square shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 orIEC:62722with all neccssary acc$sories as requiredI'x I' LED Panel light |
| 73 | SIF S.P. MCB DB : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, compiete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator 8 way, Double door |
| 74 | S/F C'Ecries, MCB : Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for.inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required.6/32 amps, Single pole |
| 75 | Supply Installation, testing and commissioning of follwing size ceiling fan 3 Blades confirming to13:374,.2019 including wiring the down rods of Standard length (upto 30cm) with l.Ssq.mm. FR PVC insulated, copper wiresuitable for 230V 50H2, single phase supply etc. complete as required.1200mm (48\\") BLDC 5star rating 32W Ceiling Fan |
| 76 | 15/16 Watt LED Bulb |
| 77 | SIF Busbar chamber : Providing and fixing following capacity busbar chamber with 4 strips of length 300mm made of copper suitable for following capacity complete with all accessories including connections, earthing the body etc. as required.100amp |
| 78 | S/F rewireable double pole/ TP&N switch disconnector : Providing and fixing following DP/TP&N sheet metal switch disconnector fuse unit in the existing metal board with rewireable type fuses, including drilling holes in metal board . making connections. etc. as required.63 amps, double pole |
| 79 | 16sq mm, 2Core |
| 80 | Layrng and fxing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. lUpto 35 sq. mm (clamped with lmm thick saddle) |
| 81 | S/F SP MCB blanking plate : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 82 | Earthing with copper earth plate 600mrn x 600mm x 3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) asrequt |
| 83 | Carriage cost of materials do..do..all complete as per direction of E/I |
| 84 | Bricks Lead =8km |
| 85 | Sand lead = 8 km |
| 86 | Stone metal lead = 22 km |
| 87 | Providing and fixing ( Door Frame) 12 mm thick plywood (Green Ply/ Green Panel) on door Frame and Pasting with 1.0 mmthick Green or ISI mark water proof ply Grade with material and labour all complete as per building specification and direction of E/I. |
| 88 | Providing and fixing and and Fitting (Old Door Shutter Panneling ) one side 12mm & other side 6mm ply providing for panelling old Door shutter with 1.0mm thick Green Pasting on a both side with material and labour all complete as per building specification and direction of E/I. |
| 89 | Providing Supply,fixing and fitting of Wardrob (Old RCC rack , extension, Frame, Shutter) of Size 8'x7'x1.5' using 19mm thick water proof ply and making (General Wardrobe) with 1.0 mm Laminate (Greenlam , Royal Touch, eqv.) Pasting with material ( including all fancy fitting, lock, etc ) and labour all complete as per building specification and direction of E/I. |
| 90 | Providing Supply,fixing and fitting of (Old RCC rack , extension, Frame, Shutter) of Size 4'x7'x1.5' using 19mm thick water proof ply and making (General Wardrobe) with 1.0 mm Laminate (Greenlam , Royal Touch, eqv.) Pasting with material ( including all fancy fitting, lock, etc ) and labour all complete as per building specification and direction of E/I. |
| 91 | Providing Supply,fixing and fitting of (Old RCC rack , extension, Frame, Shutter) of Size 5'x7'x1.5' using 19mm thick water proof ply and making (General Wardrobe) with 1.0 mm Laminate (Greenlam , Royal Touch, eqv.) Pasting with material ( including all fancy fitting, lock, etc ) and labour all complete as per building specification and direction of E/I. |
| 92 | Providing Supply,fixing and fitting of 19mm thick water proof ply and making (General Wardrobe) with 1.0 mm Laminate (Greenlam , Royal Touch, eqv.) Pasting with material ( including all fancy fitting, lock, etc ) and labour all complete as per building specification and direction of E/I. |
| 93 | Supplying & Fixing Aldrop 10\\" Antiquedo…do...all complete job. |
| 94 | Supplying & Fixing Door stoper Antiquedo…do...all complete job. |
| 95 | Supplying & Fixing Handle 6\\" Antiquedo…do...all complete job. |
| 96 | Supplying & Fixing Tower Bolt 8\\" Antiquedo…do...all complete job. |
| 97 | Supplying & Fixing Hinge 5\\" Antiquedo…do...all complete job. |
| 98 | Add 18 % GST (in Basic Rate must fill 12) |
| 99 | Add 1% Labour Cess (in Basic Rate must fill 1) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender