Tender For Special Repair And Renovation Of P.H. Services In Kothi No. 3-A, Near Circuit House Baradari Garden, Patiala (Under Head 2215 W/S And Sanitation).
Tender Value
12.41 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
3 days left
EMD
24823
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair And Renovation Of P.H. Services In Kothi No. 3-A, Near Circuit House Baradari Garden, Patiala (Under Head 2215 W/S And Sanitation).
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 2 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm sand filling using mechanical mixer for mixing of material |
| 3 | Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Fine sand) for new flooring complete. |
| 4 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 5 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 6 | Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. |
| 7 | Eurpoean/Indian/Orissa W.C., |
| 8 | PVC / China Ware Cistern |
| 9 | Wash Hand Basin / Urinal Pot |
| 10 | CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap |
| 11 | Bathroom Assessories such as Soap Dish, Towel Rail, Towel Ring, Towel Bracket, Mirror, Toilet Paper Holder, Seat Cover, Jet Pressure and all other accessories. |
| 12 | Providing and fixing in position Chinaware extended wall mounted E. W.C. type suite (size 66 x 46 x 77.5 cm ) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) with or without 10 ltr. chinaware matching flushing cistern and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 13 | Chinaware wall mounted E.W.C without cistern including seat cover complete in all respect. |
| 14 | Providing and fixing in position concealed cistern including flushing plate of approved make (to the approval of the Engineer-in- charge) complete in all respect. |
| 15 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 16 | Providing and fixing jet spray with 2'-6\\" long PVC pipe. |
| 17 | With C.P. Brass nut |
| 18 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. |
| 19 | Size 550 mm x 400 mm x 815 mm |
| 20 | Table Top (size 49 x 40 x 15 cm) |
| 21 | Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. |
| 22 | Vitreous chinaware standard white pedestal for wash hand basin. |
| 23 | Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect. |
| 24 | Double bowl Sink without drain board Overall size 1114 x 490 mm with bowl size 460x385x200mm including waste coupling |
| 25 | Providing & fixing in position C.P brass Sink mixer swivel spout (Wall mounted) of approved make (to the approval of Engineer- in-charge) complete in all respect. |
| 26 | Providing and fixing in position vitreous Chinaware white Indian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm, C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete. |
| 27 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 28 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. |
| 29 | C.P brass towel ring |
| 30 | C.P. brass towel bracket (610mm long) |
| 31 | Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 32 | C.P. Brass fittings: |
| 33 | C.P brass Sink mixer with regular spout table mounted with 450mm long flexible hose |
| 34 | C.P. Brass Accessories: |
| 35 | C.P. brass toilet roll holder with flap |
| 36 | Providing and fixing Stainless steel health faucet complete in all respect. |
| 37 | Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineer- in-charge) fixed in with rawl plugs and C.P brass screws complete in all respect. |
| 38 | C.P. brass Glass Corner with rail 8 mm thickness and height 250 mm |
| 39 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 40 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) |
| 41 | Size 600mmx450mm |
| 42 | Providing and fixing in position C.P. brass overhead shower round or square 1 flow without shower arm with 15mm i/d inlet of approved make (to the approval of Engineer- in-charge) complete in all respect. |
| 43 | CP Brass rain Fall Shower without arm 6\\" square |
| 44 | Providing and fixing in position C.P. brass overhead shower arm chrome round or square with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 45 | CP Brass rain Fall Shower arm 24\\" length square chrome |
| 46 | Providing and fixing divertors of approved make (to the approval of Engineer-in-charge) for bath and shower system complete in all respect. |
| 47 | Single lever concealed divertor for bath and shower system (3 inlet flow) with body and upper part |
| 48 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 49 | C.P. brass Bib cock long nose/ long body foam flow without flange |
| 50 | C.P. brass Bib cock foam flow without flange |
| 51 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge)complete in all respect. |
| 52 | C.P.brass 15mm Concealed stop cock with flange. |
| 53 | C.P.brass 15mm Angle valve without flange |
| 54 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect. |
| 55 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge) with various fixtures complete in all respect. |
| 56 | C.P. Brass extension piece, 25mm long to 50mm long |
| 57 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 58 | CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. |
| 59 | CPVC SDR 11 pipes & fittings 20mm o/d |
| 60 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition |
| 61 | Size 75 mm x 75 mm |
| 62 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 63 | Through wall 22.86 cm thick |
| 64 | Providing & fixing in position C.P. brass tube connection braided SS304 of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 65 | CP Brass Flexible tube Connection Braided SS304 of size 15mm x 900mm long |
| 66 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. |
| 67 | Single Socket Type B |
| 68 | 110mm o/d SWR UPVC pipe line laid complete |
| 69 | 90mm o/d single socket SWR UPVC pipe lines laid complete |
| 70 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. |
| 71 | For 110mm o/d pipes |
| 72 | Elbow 90 Degree (All side socketed) |
| 73 | P Trap/Floor Trap 110mm x 75mm |
| 74 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. |
| 75 | Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge) |
| 76 | 110mm o/d |
| 77 | 90mm o/d |
| 78 | Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 (150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement,R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. |
| 79 | 600mm x 900mm inside with 455mm x 455mm cover and frame light duty double seal |
| 80 | Providing and fixing in position PVC gully traps 100mm fixed in cement concrete 1:4:8 complete with SFRC cover with frame weighing 7.26 Kg. 300mm x 300mm including Grating complete in all respects. |
| 81 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer-in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. |
| 82 | Triple Layer Tanks |
| 83 | Providing and fixing in position automatic brass Ball Cock in tanks. |
| 84 | Plastic Ball Cock with rod and Plastic Ball |
| 85 | 20mm i/d |
| 86 | Providing and fixing CPVC Ball Valve 25mm complete in all respects. |
| 87 | Providing and fixing CPVC Union 25mm complete in all respects. |
| 88 | Providing and fixing CPVC Tank Nipple 25mm complete in all respects. |
| 89 | Construction of B.B. Platform for tank capacity 500/1000 ltr of size 0.9m dia to 0.60m ht. with RCC Slab at any floor complete in all respects. |
| 90 | P/F CPVC FTA/MTA 25mm complete in all respects. |
| 91 | P/F CPVC FTA/MTA 20mm complete in all respects. |
| 92 | Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge) including carriage complete in all respect. |
| 93 | Water Cooler Full Steel Body 150/150 ltr without Stablizer |
| 94 | Providing & fixing in position Commercial RO without reservoir with four no cartridge/ membrane having flow rate 50 ltr/hr with 6 stage purification process of approved make (to the approval of Engineer-in-charge) including carriage and fixing in position complete in all respect. |
| 95 | Disilting of manhole including all safety measures, cost of container T & P and disposal of silt upto 5km complete in all respects. |
| 96 | Depth upto 3 m. |
| 97 | Black Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. |
| 98 | Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. |
| 99 | 110mm o/d pipe |
| 100 | 160mm o/d pipe |
| 101 | Grinding of edges of Granite |
| 102 | Credit of old dismantled material Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender