Tender For E-Tender For The Furnishing Works At Thrissur , E-Tender For Furnishing Works At Thrissur For More Details Refer Tender Documents , Corrugated Sheet - Providing And Fixing Corrugated Gi Sheet On Framework, Including Cutting, Bending, Grooving,
Tender Value
37.02 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
2 days left
EMD
37022
Bank guarantee accepted
Document Fee
6583
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For E-Tender For The Furnishing Works At Thrissur , E-Tender For Furnishing Works At Thrissur For More Details Refer Tender Documents , Corrugated Sheet - Providing And Fixing Corrugated Gi Sheet On Framework, Including Cutting, Bending, Grooving, Panelling, Fixing With Stainless Steel Screws, Nuts, Bolts, Brackets, Anchors, Weather-Proof Silicone Sealant And All Necessary Accessories, Complete As Per Drawings And Directions Of Engineer-In-Charge , Platform - Fabrication And Fixing Of Platform Made Of 9Mm,12Mm,16Mm Plywood Of Box Work As Per Design All Necessary Hardware Hinges Etc. , Table (220X60X75 Cm) - Fabrication And Fixing Of Table Made Of Hydraulic Press Laminated 16Mm Plywood Of Box Work & Shutter With Laminated Marine Ply And In Side White Laminate . All Exposed Surface To Be Laminate Finish, As Per Design All Necessary Hardware Hinges Etc. , Table (215X60X75 Cm) -Fabrication And Fixing Of Table Made Of Hydraulic Press Laminated 16Mm Plywood Of Box Work & Shutter With
BOQ
| Sl. No. | Item Description |
| 1 | e-tender for Furnishing works at ThrissurFor more details refer tender documents |
| 2 | CORRUGATED SHEET - Providing and fixing corrugated GI sheet on framework, including cutting, bending, grooving, panelling, fixing with stainless steel screws, nuts, bolts, brackets, anchors, weather-proof silicone sealant and all necessary accessories, complete as per drawings and directions of Engineer-in-Charge |
| 3 | PLATFORM - Fabrication and fixing of platform made of 9mm,12mm,16mm plywood of box work as per design all necessary hardware hinges etc. |
| 4 | TABLE (220X60X75 cm) - Fabrication and fixing of Table made of Hydraulic pressLaminated 16mm plywood of box work & shutter with laminated marine ply and in side white laminate . All exposed surface to be laminate Finish, as per design all necessary hardware hinges etc. |
| 5 | TABLE (215X60X75 cm) -Fabrication and fixing of Table made of Hydraulic press Laminated 16mm plywood of box work & shutter with laminated marine ply and in side white laminate . All exposed surface to be laminate Finish, as per design all necessary hardware hinges etc. |
| 6 | CEMENT BOARD PARTITION- Heavy duty fibre cement board The partitions are of one sideskin type. The partition should be firmly fixed on floor/roof/ counter/wall using Aluminium studs of 53mm or nearest as floor track ,roof track,horizontal and verticals made of distance of 60cm and to the edges if required as per the issued drawing The framework is covered with 10mm thick heavy duty fibre cement board one side. Necessary openings have to be provided for doors and windows The boards are to be jointed and and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound.The rate excluds putty, primer and painting work. |
| 7 | WALL PANELLING - Fabrication and fixing of Wall panel made of 9mm,12mm, 16mm plywood , as per design all necessarry hardware hinges etc |
| 8 | PUTTY - Providing and applying white cement based putty of average thickness 1 mm, of approved brand andmanufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 9 | PAINTING - Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer |
| 10 | PAINTING - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 11 | WASH AREA - Fabrication and fixing of kitchen cabinet made of 17mm 3 layer WPC of box work & shutter withlaminated marine ply and in side white laminate All exposed surface to be laminate Finish, as per design all necessarry hardware hinges etc. |
| 12 | MIRROR |
| 13 | PVC CEILING -Providing and fixing PVC false ceiling comprising of high -quality PVC panels of approved colour, design and thickness not less than 8mm, fixed on a framework made of GI /PVC battens/wooden reapers duly treated and spaced at suitable intervals.The panels shall be tongue and groove interlocked andsecurely fixed using screws/clips. The framework shall be properly aligned, levelled and anchored to the existing ceiling /walls. All joints, edges and corners shall be finished with matching PVC cornice, edge trims, or moulding The work includes necessary cutting, finishing, scaffolding, and complete installation as per site requirements, including all labour, materials, tools and accessories to complete the work inall respects |
| 14 | BRICK WORK - Solid block masonry using pre cast solid blocks ( Factory made)of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete |
| 15 | PLASTRING - 12 mm cement plaster of mix: 1:6 (1 cement : 6 fine sand). |
| 16 | PATCH WORK - Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead: With cement mortar 1:4 ( 1 cement : fine sand) |
| 17 | CONCRETE - Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources |
| 18 | GYPSUM CEILING -Providing and fixing false ceiling Providing and fixing false ceiling at all height including 45x15x0.9 mm running at the spacing of 1200 mm centre tocentre, to which the ceiling section 0.5 mm thick bottom wedgeof 80 mm with tapered flanges of 26 mm each having lips of10.5 mm, at 450 mm centre to centre, shall be fixed in adirection perpendicular to G.I. intermediate channel withconnecting clips made out of 2.64 mm dia x 230 mmlong G.I. wire at every junction, including fixing perimeterchannels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame ofperimeter channels suitably fixed, all complete as per drawings specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1 :2011 (Board with BIS certification marks)providing and fixing of frame work made of special sections,power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels |
| 19 | FRP DOOR (90X210 cm) - Providing and fixing Fiber Reinforced Plastic (FRP) paneled door shutter of required colour and approved brand and manufacture, with made with Fiber Glass Reinforced plastic ( FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32mm x15mm to receive shutter of 30 mm thickness. Fire-retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames |
| 20 | FRP DOOR (80x210 cm) - Providing and fixing Fiber Reinforced Plastic (FRP) paneled door shutter of required colour and approved brand and manufacture, with made with Fiber Glass Reinforced plastic ( FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32mm x15mm to receive shutter of 30 mm thickness. Fire-retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames |
| 21 | FLOOR TILE - Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of Ist quality conforming to IS: 15622 of approved make in all colours, shades, except white, Ivory, GreyFume Red Brown, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand) including pointing the joints withwhite cement and matching pigments etc., complete |
| 22 | WALL TILE - Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in- Charge, in skirting, risers of steps and dados, over 10 mm thick Cement Board partition wall/block wall and jointing with glue, including pointing in epoxy mixed with pigment of matching shade complete. |
| 23 | NYLONE CARPET - Supplying imported 8mm pile height the room with 150gsm rockwool/polyform filled inside plywood and fabric finished plywood in final layer.(front wall 214sft, back wall 126sft, step both side wall 560sft, diaz side 2 wall 237sft), from brick wall to roof top covered with rockwool and plywood, from brick |
| 24 | Nylon Carpet Laying Fitting-fixing imported 8mm shall be provided with a centre tilt mechanism with singlelocking system, fixed lumbar support, fixed armrests, and a nylon base fitted with castors for easy movement. Shade shall be black |
| 25 | UPVC WINDOW (WHITE)Providing and fixing factory-made white uPVC sliding glazed window complete with frame, sash, rollers, locks, gaskets, reinforcement, fasteners, and weatherproof sealing, as approved by the Engineer-in-Charge. (1m x 1m) |
| 26 | CHAIR - The medium back mesh chair shall be provided with a centre tilt mechanism with singlelocking system, fixed lumbar support, fixed armrests, and a nylon base fitted with castors for easy movement. Shade shall be black. |
| 27 | CHAIR - The medium mesh back visitor chair shall be provided with fixed armrests, lumbar support, andpowder-coated metal legs. Shade and finish shall be as per approved selection |
| 28 | PLUMBING WORK - Supply & Installation of Sanitary Fixtures and Plumbing Connections Providing, supplying, and installing sanitary fixtures including 2 Nos. European Water Closets (EWC) and 2 Nos. Wash Basins of approved make and quality, complete with all necessary fittings and accessories. The work includes providing and fixing inlet and outlet pipe connections using suitableCPVC/PVC pipes, fittings, valves, traps, and connectors as required. Scope also includes core cutting of walls/floors/slabs wherever necessary, making good the damages, proper alignment, sealing, testing, and commissioning of the system. The rate shall include all materials, labour, tools, transportation, and incidental charges required to complete the work in all respects as per site conditions and engineer?sinstructions. |
| 29 | ELECTRICAL WORK - Providing, supplying, installation, testing and commissioning of complete electrical wiring for a conference hall including 53 nos of 6amps point on table, 1tv point, 32 Nos. light points(15 watt), 5 Nos. ceiling fan points, and 8 Nos. air-conditioner (AC) points, using FRLS copper wiring of approved make. Light and fan points shall be wired with 1.5 sq.mm copper conductor with suitable earthing, controlled through modular switches fixed in concealed/surface PVC boxes. AC points shall be wired using 2. 5/4 sq.mm copper conductor with appropriate MCB protection,isolator switches, and socket outlets as required.All wiring shall be carried out through PVC conduits (concealed or surface as per site condition) with proper saddles, bends, and accessories. Switches, sockets, and plates shall be modular type of approved brand. Distribution board (DB) shall be providedwith MCBs/ELCB of suitable rating for circuit protection and load distribution. |
| 30 | AC (2TON) - Air Conditioner Supply (including transportation) of inverter type air conditioners comprising of outdoor unit with SCROLL/ROTARY Compressor, isolating valve, copper condenser & evaporator coils, air cooled condenser fans, thermostatic control, safety cut-outs, vibration pads with single outdoor and Indoor unit with 3 row cooling coil, 20Micron filter including remote controller, ODU fins and stabilizer. Note: TheHi-Wall Split Air |
| 31 | Air Conditioner Installation charges |
| 32 | Air Conditioner outdoor unit stand |
| 33 | Supply of 15 W LED Recess light 32 nos |
| 34 | Exhaust fan :Supply and installation of Exhaust Fan of 250mm sweep with approved colour, quality and including cutting and making good the walls and etc complete as directed by the engineer in charge. |
| 35 | Wall Fan - Supply and Fixing ,conveyance, installation and commissioning of wall fan, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire |
| 36 | Supply, fixing, testing and commissioning of 100-150W RMS PA Mobile Amplifier made in a compact housing compliant in size with relevant DINstandards. It features a built-in MP3 Player with remote, and has provision for external Mic and AUX inputs. Priority of mic signal over AUX / USB/ bluetooth is provided, making it easy to make announcements without readjusting the level controls for music-dual zone mode |
| 37 | PUBLIC ADDRESS SYSTEM (COMMON) Supply, fixing, testing and commissioning of the PUBLICADRESS SYSTEM COMMON with following specificationsSupply, fixing, testing and commissioning of wall mounted 15-20W speakers.make: ahuja |
| 38 | DISMANTLING - ALUMINIUM PARTITION AND STAIR Dismantling steel work in single sections includingdismembering and aluminum / Gypsum partitions includingdisposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer -in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender