Tender For Certain Repairs To Wooden / Aluminium Joineries, Flase Ceiling And Certain Other B/R Repairs To Bldg Of Md/Otm / Technical Area Of Cg Of Age B/R-I Under Ge Haddo, Sri Vijayapuram.
Tender Value
42 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
12 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repairs To Wooden / Aluminium Joineries, Flase Ceiling And Certain Other B/R Repairs To Bldg Of Md/Otm / Technical Area Of Cg Of Age B/R-I Under Ge Haddo, Sri Vijayapuram.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Jul-2026 | BOQ Corrigendum | BOQ | 13-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat with shutters (without taking off shutters from the frame) area n exc 1.5 Sqm each all as specified and directed. |
| 2 | Taking down chowkhat with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n exc 4 Sqm each all as specified and directed. |
| 3 | Taking down chowkhat or frame area n exc 1.5 sqm each etc, completed all as specified and directed. |
| 4 | Taking down chowkhat or frame area exc 1.5 sqm but n exc 4 sqm each etc, completed all as specified and directed. |
| 5 | S&F 2nd class hardwood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints etc complete all as specified and as directed. |
| 6 | S&F flush shutter 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6mm thick wooden lipping around the edges of shutter complete all as specified and directed. |
| 7 | S&F 35mm thick, IInd class hard wood glazed and skeleton shutter open rebated and prepared to receive gauze, etc. (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing gauze etc size of members of shutters as specified and as directed. |
| 8 | Supply and fix PVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening but wood grain printed PVC sheet & edges will be painted to match printed sheet, etc complete all as specified and directed. |
| 9 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, but Single Side Prelam PVC sheet used instead of Plaincolour PVC sheet and stile & railshaving one side feathered edge and on other side 10mm 90 degree bent edge, suppling & fixing in the frame at site as specified and as directed. |
| 10 | Supply and fix for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as per specified and as directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 11 | Supply and fix for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as per specified and as directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 12 | Supply and fix for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per specified and as directed.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 13 | Supply and fix for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per specified and as directed.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 14 | S&F stainless steel (SS-304 grade) hinges 100x62x2.5 mm of approved quality, with necessary stainless steel screws etc, complete all as specified and directed. |
| 15 | S&F 200 mm long of Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 16 | S&F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 17 | S & F 150mm extruded aluminum alloy handles, cast type, anodized complete all as specified and directed. |
| 18 | S & F Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 300 mm etc complete all as specified and directed. |
| 19 | S & F for 150 mm length of Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 20 | S & F 200 mm long of brass, barrel tower bolts of extruded section complete all as specified |
| 21 | S & F 150 mm long extruded brass handles, cast type, polished bright etc, complete all as specified. |
| 22 | S & F for Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, length of bolt in 300 mm etc complete all as spd and directed. |
| 23 | S&F door seal bottom of width not less than 30 mm and length (ranges 500 mm to 1200 mm) suitable according to door shutter width to protect entry of insects efficiently, etc all as specified and as dierected. |
| 24 | S & F for 150 mm length floor door stopper of brass body and tongue, anodised,with hard drawn steel spring, fixed in floor, Overall length of cover plate 150 mm,etc complete all as spd and directed. |
| 25 | S&F for Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 26 | Taking down Aluminium Windows chowkhats or door frames with shutters without taking off shutters from frames exe 1.5 Sqm and n.exc 4 Sqm each etc complete all as specified and directed. |
| 27 | Taking down Aluminium Windows and Ventilator chowkhats or frames with shutters without taking off shutters from frame n. exe 1.5 Sqm each etc complete all as specified and directed. |
| 28 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete all as per specified and as directed.Note supply only glass,wire mesh ,prelaminated particle board will be measured and paid seperately. |
| 29 | S&F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around theopening, all including takingdown old aluminium grill complete all as specified and as directed |
| 30 | Supply only 12mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc all as specified and directed. |
| 31 | Supply only 4mm thk sheet glass ordinary quality and glazing with beads in square n exc 0.5 Sqm in each pane incl hacking out old glass panes complete all as specified |
| 32 | Supply only 4 mm thk sheet glass ordinary quality and glazing with beads in square exc 0.5 Sqm in each pane and extra over sheet glass, ordinary quality, if sheet glass is ground or obscured or frosted, on one sideincl hacking out old glass panes complete all as specified |
| 33 | Supply and fix in repairs 12mm thick sheet glass toughned glass as in hinged doors, partitions automatic doors closer, and similar work including cutting to shape, drilling holes required etc, if sheet glass is ground or obscured or frosted, on one side including hacking out old glass panes complete all as specified |
| 34 | S&F in repairs 300mm long mild steel helical door spring, ordinary rat tail pattern spring, including roller and roller plate complete all as specified and directed. |
| 35 | S&F Stainless Steel EGF combo with lock heavy duty automatic floor spring (80Kg) load, with necessary fitting, etc all as specified and as dierected. Make : Godrej or equivalent as approved by GE. |
| 36 | S&F Stainless Steel A2 Combo of Sliding Door System Kit, Grade: 304 with necessary fitting, etc all as specified and as dierected. |
| 37 | Supply only Aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples or beading etc complete all as specified and directed. |
| 38 | S&F in repairs Aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples or beading etc complete all as specified and directed. |
| 39 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, etc including taking down old all as specified and directed. |
| 40 | Dismantling boarding, shelves, partitions of any description, fixed in any position with nails, screws, clamps, etc including all fittings all as specified and directed. |
| 41 | M&L for HDF boards (fire & water proof) of 18mm thick as in cub boards, cabinet, shelves etc & the like with decorative choice lamination on one side and balancing white lamination on other side with necessary fitting etc, complete all as specified and as directed. |
| 42 | S&F Auto concealed hinges stainless steel grade AISI-316 (type Austenitic anticorrosive in nature) suitable for kitchen cabinets, cub boards, Shelves etc complete all as specified and as directed. |
| 43 | S&F SS Fancy 'D' Type Drawer / Cabinet handles of Size 100mm, etc all as specified and as dierected. Make Prayag Cat No SSB-2100) |
| 44 | S&F Magnetic catcher with plate, glossy finish for Drawer / Cabinet of Size not less than 50mm, etc all as specified and as dierected.Make Prayag Cat No MDC-W55) |
| 45 | S&F Stainless steel Telescopic channel 18 inches length with necessary fitting, etc all as specified and as dierected.Make Godrej Cat No 9721) |
| 46 | S&F Stainless steel 25mm thick glass door full handle 14 inches length with necessary fitting, etc all as specified and as dierected.Make Prayag Cat No SH25-14P-SS) |
| 47 | Dismantling plain or corrugated steel sheeting any gauge, thickness including similar pattern roof coverings. |
| 48 | M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed. |
| 49 | M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed |
| 50 | M&L 2mm thickness fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc if fixed with L-type or J-type or cranked hook bolts in lieu of screw including dismantling wrought iron or mild steel work of any description and in any position not otherwise provided etc, complete all as specified and directed. |
| 51 | Removing and re-fixing of roof and wall steel sheet of any thickness as in roof covering, ridge, eves gutters etc fixed with self tapping screws as specified. |
| 52 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning and removal to Store (measured overall as fixed along the centre line over fittings and accessories) etc, complete all as specified and directed. |
| 53 | M&L for 0.71 mm thickness Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straightflashing (length and girth as fixed) with necessary fittings etc, complete including taking down all as specified and directed. |
| 54 | Dismantling structural steel work of any description complete all as specified. |
| 55 | M&L for rolled section as in main and cross beam, hip and jack rafter,purlins where connected to common rafters and running rails and guides for sliding doors fixed witg angle cleats or other connecting plates of grade Fe-410 (grde E-165) etc complete all as specified and as directed |
| 56 | M&L for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts etc, completed all as specified and directed. |
| 57 | Dismantling of ceiling boards including grid of any description fixed in any position with nails or screws etc all as specified and as directed. |
| 58 | S&F for anodoised aluminium powder coated snap grid frame work for ceiling 605mm x 605mm using aluminium anodised sections aluminium sections main tee 36.5X25X1.4mm, cross 23.5X26.4X1.4mm, angle 25X25x1.4mm including cutting, drilling jointing etc complete including 4mm dia of GI hangers wire suspenders fixed with adjustable connectors and providing 4mm thick E-boards (Classic) 605mm x 605mm size and making good etc including two coats of OBD over one coat of primer complete all as specified and as directed. |
| 59 | M & L for seamless false ceiling made out of 12mm thick of gypsum board fixed to the ceiling section with 25mm long self drilling and tapping screws having Philips head with under head cutter at 200mm centre to centre, including finishing the joints of face board with specially formulated joining compound and 48 mm wide fibre tape to provide seam less finish and including GI channel 0.55 mm thick with two unequal flanges of 20 to 30mm and web of 27 mm fixed to surrounding wall using nylon sleeve and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 215 mm each and web of 45 mm suspended from soffits at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.20mtr length) of 0.55 mm thick having kurled web of 50 mm and flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including 6mm thick GI hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40x3 mm size long and expansion hold fasteners 12.5mm dia 40mm long including thin layer of Pop with Gypsum binder, sanding the surfaces till smooth surface is obtained and finally applying two coats of Oil bound distemper over a coat of primer over one coat of primer. |
| 60 | S&F PVC insulation panels (thickness of insulation pannel 10mm) with EPS stuck to 1mm plain PVC sheet suitable placed in false ceiling grid made of Anodised aluminium snap grid frame work for false ceiling and including 6mm thick GI hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40x3 mm size long and expansion hold fasteners 12.5mm dia 40mm, long including dismantling boards including grid of any description fixed in any position with nails or screws etc all as specified and as directed. |
| 61 | M&L in repairs to 12 mm thick WPC (Wood-Plastic Composite) louvers Panel boards as in Wall panelling work fixed over frame work using suitable aluminium profile sections of size 50mmx25mmx2mm thick and fixed with suitable screws / fasteners as per the site requirents etc complete all as specified and directed.Note: Design and Pattern will be finilized by the Engr In charge.complete all as specified and as directed |
| 62 | M&L in repairs to 18 mm thick rubco huat rubwood in built up interiors as in cupboards, shelves wall lining, box structure and including all fitting items complete all as specified and directed. After completing the carpentry works all the visible woods area will be sanding by No.60 & 80 Wood Sanding Paper, after that will be applying Sheenlac make Filler with mixing of NCD Thinner (Sheenlac make), then pasting Chock Putty in the shabby/nailing area which will be sanding with No.120 Sanding Paper, after that will applying Sealer of Sheenlac make and walnut colour stainer, then cutting with No. 320 Sand Paper, after completing the above process will spray Melamine Polish of Berger/Sheenlac make then cutting with No.400 Sanding Paper. Finally will applying Silicon make: Waxpol with soft Banyan Cloth for better shining/finishing. Make of rubber wood members: RUBCO or equivalent complete all as specified and as directed |
| 63 | M&L for 30mm thick rubber wood superior quality, chemically pressure treated, egde glued, finger jointed, tongued, grooved as in door shutter and finished with two coats of melamine polish with asian sealer and wood filler over a coat of honey/natural colour wood filler putty for dust free surface etc including preparation and applying three types of sand papers and surface finish to a glossy/ mat finish to match with the adjoining surface complete including taking down shutter all as specified and as directed. Make of Rubber Wood members : RUBCO/ India Wood or equivalant |
| 64 | S & F in repairs 8mm thick fibre cement plank ( size 3.00 x 0.15m ) of any colour fixed in position with suitable screws/ fasteners as per manufactures instructions on aluminium/ mild steel work in wall cladding including applying two coats of exterior emulsion paint on fibre planks complete all as specified and as directed. Note: Aluminium/ Mild steel work shall be measured and paid seperately. Make : Sheera of M/s Mahaphant Fibre cement (South Asia) Pvt Ltd or its equivalent all as specified and as directed. |
| 65 | M&L in repairs to Aluminium composite panel sheet of 3.0mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polyethylene core with PVDF coating of 30.0micron fixed over frame of aluminium tabular section 50x25mmx 2.0mm thick, having panels not exc 1200x1200mm with necessary silicon filling, in approved pattern as in column, beam, wall at any height with necessary scafoldings etc complete as specified and as directed. |
| 66 | M& L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match including screed bed or bedding layers 15 mm thick in cement mortar (1:6) for laying floor finishes including dismantling floor hearth or wall tiling including cement mortar bedding removing, rubbish off the premises all as specified and directed.complete all as specified and directed. |
| 67 | S&F Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match including screed bed or bedding layers 15 mm thick in cement mortar (1:6) for laying floor finishes including dismantling floor hearth or wall tiling including cement mortar bedding removing, rubbish off the premises all as specified and as directed. complete all as specified and directed. |
| 68 | S&F glazed ceramic coloured tiles (350x450 x 7mm thick ) on dado & skirting , set and jointed in neat cement slurry and pointed in white or colored cement to match including 10 mm thick rendering with rough finished in cement mortar 1:4 to received tile including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing, rubbish off the premises all as specified and directed. etc, complete all as specified and directed. |
| 69 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms,floor, walls and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and polishing including dismantling of existing unserviceable stone slabs alongwith cement mortar bedding removing rubbish off the premises complete all as specified and directed. |
| 70 | Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed. |
| 71 | M&L for rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on other than fair faces of brick work or stone masonry surfaces finished even and smooth without using extra cement, including taking down cement plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc complete all as directed.Note: Water proofing compound shall be measured and paid separately. |
| 72 | Supply only integral water proofing compound all as specified and as directed. |
| 73 | M&L rendering 10mm thick in CM 1:6 on brick surfaces and finished even and smooth w/o using extra cement etc, including taking down cement plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc completed all as specified and directed. |
| 74 | Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc, all as specified and directed |
| 75 | M&L two coats of oil bound distemper over a over a coat of primer, including necessary preparation of surfaces etc, completed all as specified and directed. |
| 76 | S&F in repairs of 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6mm thk AC bldg board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed. |
| 77 | S&F in repairs mirror Cabinet 400 x 500 mm with fitting etc complete all as specified and as directed. (Make: Prayag Cat No. 554 or Equivalent approved) |
| 78 | S& F in repairs, 25 mm dia Stainless steel curtain rods with fancy type curtain brackets, stops, rollers as per the site requirements etc complete all as specified and as directed. |
| 79 | S&F in repairs for plate rack of stainless steel using 0.65mm thick sheet, size not less than 914x786x254mm with steel sleevs & hanging arrengement for utensile, complete all as specified and directed (Make : Prayag Cat No. P-448 or Equivalent / Bluestar) |
| 80 | S&F in repairs for plate rack of stainless steel using 0.65mm thick sheet, size not less than 786x610x254mm with steel sleevs & hanging arrengement for utensile, complete all as specified and directed (Make : Prayag Cat No. P-440 or Equivalent approved) |
| 81 | S&F in repairs for Corner glass self assembly size 300mm with chromium plated bracket guard and railing (Make: Prayag Cat No. BEA-44 or Equivalent approved) |
| 82 | M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer all as directed. |
| 83 | M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth complete all as specified and as directed. |
| 84 | M&L for preparation of new/old wooden surfaces and applying melamine polish through the process of sanding with wood sanding paper of size 60 & 80 and applying wood filler mixed with NCD thinner including applying wood putty on shabby/ nailing area and sanding with sand paper of size 120 and applying sealer and walnut colour stainer and sanding with sand paper of size 320 and melamine polishing with spray application and again sanding with 400 sand paper and finally applying silicon of make Waxpol with soft fine cloth for better shining and finishing complete all as specified and directed |
| 85 | NOTE: The item of BOQ shall be executed in high rise building. The contractor shall arrange necessary scaffolding/ shoring, water pressure jet pump and other safety measures to be undertaken including insurance cover for the workers engaged by him during the execution of work. The rate quoted by the contractor for the above items shall be inclusive of the above provisions . Nothing extra on this account is admissible. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 13, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 12 daysAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender