Tender For Repairs/Maint Of Chequered Tiles, Interlocking Paver Block, Compound Wall, Kerb Stone In Zone ‘C Area At Nda Khadakwasla
Tender Value
49 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
18 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs/Maint Of Chequered Tiles, Interlocking Paver Block, Compound Wall, Kerb Stone In Zone ‘C Area At Nda Khadakwasla
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 2 | M&L for PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in surface channel and drain, hardstanding including finishing surface even and smooth without using extra cement including necessary form work complete all as specified and directed. |
| 3 | M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) as in roof kerb, mud stops, channel/ benching of manhole laid to shape and slope surface finished even and smooth using extra cement including necessary formwork complete all as specified and directed. |
| 4 | M&L for precast cement concrete block masonry with solid blocks 1:3:6 type C-1 (using 20 mm graded stone aggregate), exc 10 cm in width and setting in cement mortar 1:4, complete all as specified and directed. |
| 5 | M&L cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in window cills, lintels, copings, pier caps, columns, posts, boundary pillars set in cement mortar 1:4 complete all as specified and as directed. |
| 6 | M&L for Precast Reinforced Cement concrete 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) in 55 mm thick (measured solid) Jallies or louvers including all mouldings set jointed in CM 1:4 but excluding frame including demolition of existing cement concrete complete all as specified and directed. |
| 7 | M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 8 | M&L for Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed. |
| 9 | S & F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 10 | S & F Mild steel work in framed work such as grills, gratings, framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tank and similar work confirming to Fe-290 Gde E-165 Complete all as specified and as directed by Engr-in-Charge. |
| 11 | M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 12 | M&L for Mild steel screw bolts diameter of neck 5 to 10 mm (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, not exc. 5 cm long complete all as specified and directed. |
| 13 | M&L mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends for securing chain link fencing, conforming to IS Fe 410-W(Gde.E-250), quality-A, complete all as specified and directed. |
| 14 | S & F Rolled Mild Steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe – 410 – W(Gde E - 250) quality 'B' complete all as specified and directed. |
| 15 | Fixing only in repairs chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc, and including provision of binding wire complete all as specified and directed. |
| 16 | S&F in repairs galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc as directed (each line of wire to be measured) complete all as specified and directed. |
| 17 | Supply only chain link MS galvanized fencing, conforming to IS:2721:2003 of any size or type including line wires of 3.15mm dia, straining bolts etc including provision of binding wire complete all as specified and directed. |
| 18 | M&L for rough dressed sahabad stone slab flooring 30 mm thick, jointed in cement mortar 20mm thick 1:6 and pointed in cement mortar 1:3 complete all as specified and directed. |
| 19 | M&L 75 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub floor, sub base of floor, paving, path etc including formwork complete all as specified and directed. |
| 20 | M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 21 | M&L glossy finish cement concrete chequered tiles 300 x 300 x 25 mm thick as in floors, set and jointed over and including 20 mm thick screed bed in CM 1:6 and pointed in grey cement and pigments to match the colour of tile including dismantling complete all as specified and directed. |
| 22 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete complete all as specified and directed. |
| 23 | M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 24 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 25 | M & L for painting the new wall surface complete all as specified and directed as follows :- (a) Surface Preparation- Preparation of newly plastered or previously untreated surfaces of walls (b) Putty application- NIL (c) Priming surface- Applying one coat of cement base primer (d) Painting- Applying two coats of cement base paint. |
| 26 | M&L for flush pointing to random or polygonal rubble masonry, uncoursed brought upto courses in cement mortar 1:4 complete all as specified and directed. |
| 27 | M & L for painting the new concrete surface, stone, kerb stone of any description not otherwise described for over 10 cm width or girth complete all as specified and directed as follows :- (a) Surface preparation- Preparation of new concrete surfaces of any description, not otherwise described over 10 cm width or girth (b) Priming surface- Applying one coat of primer (c) Painting- Applying two coats of synthetic enamel paint. |
| 28 | M & L for painting the new steel surface complete all as specified and directed as follows :- (a) Surface preparation- Preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth (b) Priming surface- Applying one coat of red oxide primer (c) Painting- Applying two coats of synthetic enamel paint. |
| 29 | M&L forming 12mm thick expansion joints filled with pre formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade- A thickness of slab 100 mm complete all as specified and directed. |
| 30 | Demolition of kerb stone/ precast articles fixed on compound wall pillar laid dry or in cement mortar etc complete all as specified and directed. |
| 31 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. |
| 32 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar complete all as specified and directed. |
| 33 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed. |
| 34 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided including padding concrete on roof all as specified and directed. |
| 35 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 36 | Dismantling of chain link fencing any type fix in iron/concrete post including unscrewing the screw/ nut bolts, washers etc for re-using complete all as specified and directed. |
| 37 | Dismantling post or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete, masonry etc and making good the disturbed ground complete all as specified and directed. |
| 38 | M&L for providing and laying 100 mm thick cement concrete with nominal mix 1:1.5:3 trimix concrete and tremix machine and plate vibrator by using 20mm graded coarse aggregates as in floor surface/hardstanding/ roads/slabs over drain;finished surface of concrete surface with smooth finish as required without using extra cement etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender