Tender For Repairs To Tiles, Flooring, Sunken Treatment And Sanitary Repairs At Afs Darjipura Vadodara.
Tender Value
25 Lakhs
Estimated cost
Bid Submission
15 Aug 2026
18 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vadodara → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Tiles, Flooring, Sunken Treatment And Sanitary Repairs At Afs Darjipura Vadodara.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises. |
| 2 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed. |
| 3 | M&L for 75 mm thick Cement concrete Type D2 1:4:8 (40 mm graded graded aggregate) as in sub bases,floor finishes and pavings. |
| 4 | M&L for light shade Virified Ceramic tiles 9 to10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc. |
| 5 | All as per item 4 above but on vertical surfaces/skirting. |
| 6 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 7 | All as per item 6 above but on vertical surfaces/skirting. |
| 8 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 9 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 10 | M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match. |
| 11 | M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes all as specified and directed. |
| 12 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of walls all as specified and directed. |
| 13 | Renewing tiles in patches, area n exc 5 Sqm including removing and cleaning old tiles, preparing beda and laying or setting, jointing and pointing new or old tiles of any type, any size complete all as specified and directed by engr in charge. |
| 14 | Demolition of stone slabs and tiles of any description or any thickness, laid bedded and pointed in any mortar. |
| 15 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, incl 20 mm thick screed bed in CM 1:4 including cutting space for sink & gas pipe hole all as specified and directed. |
| 16 | M&L Machine cut Pre polished kota stone slab flooring 20-25 mm thick over and incl 20mm thick cement screed base in CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab in single piece as in window cill, stairscase etc. |
| 17 | M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where everrequired to give high gloss finish complete all as directed. |
| 18 | Taking dawn cement plaster any description on brick or stone wall/ celling including raking out joint, haking for key scrubing with water etc. |
| 19 | M&L for 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonary wall, finished even and smooth without using extra cement. |
| 20 | M & L for 15 mm thick rendering in two layer 10mm thick backing coat in CM 1:6 and finishing coat 5mm in CM 1:4 using water proofing compoundon faces of brick masonary wall, finished even and smooth without using extra cement. |
| 21 | M&L rendering 5mm thick on concrete surface of ceiling CM 1:3 finished even and smooth without using extra cement complete. |
| 22 | M&L for preparation of New surfaces of wall rubbing down and applying two coat of oil bound distemper over application of chalk whitening all as specified (any tint shade as approved by GE) as directed by EIC. |
| 23 | M & L Preparation of newly plastered surfaces and priming with alkali resistant priming paint and painting with two coats of exterior Acrylic Emulshion paint (Colour or shade as approved by GE) complete all as specified and as directed by EIC. |
| 24 | M&L for preaparation of new plaster ceiling surface and applying three coats of white wash complete all as specified and directed |
| 25 | Taking up or down steel tubing and connections for 15mm bore including cleaning for refixing or removal to store |
| 26 | Taking up or down steel tubing and connections for 20 mm bore ,including cleaning for refixing or removal to store |
| 27 | S&F 15mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors, |
| 28 | S&F 15 mm bore unplasticised PVC Pipes of pressure rating 10 kgf/cm2 with all fittings and fixed completeto wall and ceiling or laid in floors complete all as specified and directed by Engr in charge. |
| 29 | S&F 20mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors, |
| 30 | Cutting chases, pinning in making good to facing where required of brick walls and pointed in cement mortar 1:3 for concealed water tubing etc cutting not exc 10 cm girth. Complete all as specified. |
| 31 | Dismantling water tanks exc 200 ltr & n exc 500ltr capacity and removing to store |
| 32 | Dismantling water tanks exc 500 ltr & n exc 1000ltr capacity and removing to store |
| 33 | S&F 500ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified. |
| 34 | S&F 1000ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified. |
| 35 | S&F 20 mm ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed. |
| 36 | S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm dia pipe |
| 37 | S&F in repairs vitreous china wash hand basin, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets all as specified and as directed. |
| 38 | S&F, in repairs vitreous China squatting pan, orissa pattern of size 580x440mm, white with integral foot rest incl connection to trap & flushing pipe. |
| 39 | S&F in repairs vitreous china pedestal pattern white (excluding fixing both flushing cistern and flush pipe) complete all specified . |
| 40 | Supply & fixing in repair plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinged device fixed in repairs. |
| 41 | S&F in repairs 10 litres capacity PVC valveless symphonic action type, flushing cistern, flush pipe of polyethylene of low or high density or PVC. 32 mm dia for low level cistern, white, with inlet, ball valve float handle including brackets all as specified. |
| 42 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified . |
| 43 | S&F 32mm brass chromium plated waste coupling for wash hand basin all as specified |
| 44 | S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium platedscrewed down highpressure, with orwithout lettered 'Hot' or 'Cold' withlong screwedshanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe all as specified. |
| 45 | S&F in repairs Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe. |
| 46 | S & F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed to 15mm bore pipe. |
| 47 | S & F in repairs Chromium plated Brass basin centre hole mixer for mixing hot &cold water, screwed down for iron pipe and fixed complete all as specifies and directed |
| 48 | S & F in repair 15 mm dia Chromium plated Angle valves, cast copper alloy screwed down high pressure, with crutch or butterfl y handle, screwed both ends for iron pipe or for unions complete all as directed. |
| 49 | S&F in repairs Stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed bothends for iron pipe or fo runions and fixed to15mm bore pipe complete all as specified. |
| 50 | S&F in repairs Concealed type Stop valves, fancy type,chromium plated with long shank and cup cast copper alloy,screwed down, high pressure,screwed bothends for iron pipe or fo runions and fixed to15mm bore pipe complete all as specified. |
| 51 | S&F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union to15mm bore pipe complete all as specified. |
| 52 | S&F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 53 | S&Fin repairs 32/40mm PVC waste pipe for wash hand basin & kitchen sink, 600mm long complete all as specified |
| 54 | S&F PVC connection 15mm size with PTMT nuts of length 600 mm complete all as specified. |
| 55 | S&F Tubular Towel Rail 20 mm dia 600mm long between flanges Brass Chromium Plated fixed complete all as specified |
| 56 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified . |
| 57 | S&F Soap dish, any type, fixed to plugs with chromium plated brass screws. |
| 58 | M&L for special treatment to sunken portion (including necessary dismantling of tiles and PCC of any description and thickness alongwith) with 10mm thick plaster in CM 1:4 mixed with and including WPC liquid complast 421 and applying one coat each of Nitroproof 100 and Nitroproof 120 on plastered surface. Rendering again 10 thick plastered in CM 1:4 mixed with and including complast 421 in sunken portion of WC and CI pipe joint shall be fitted inc filling of lean concrete 1:5:10 type E2 complete all as specified and directed |
| 59 | Demolition and breaking up drain pipes (CI drain pipes /PVC/ AC or Reinforced concrete) set in cement mortar (100mm dia), if required complete all as specified and directed. |
| 60 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed. |
| 61 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed. |
| 62 | S&F in repair 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement all as specified and directed. |
| 63 | S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed. |
| 64 | S&F 110mm bore PVC (SWR) branch piece,double (double Y) equal or unequal all as specified and directed. |
| 65 | S&F 75mm bore PVC (SWR) branch piece,double (double Y) equal or unequal all as specified and directed. |
| 66 | S&F 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal all as specified and directed. |
| 67 | S&F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal all as specified and directed. |
| 68 | S&F 110mm bore PVC (SWR) reducers |
| 69 | S&F 75mm bore PVC (SWR) reducers |
| 70 | S&F 110mm bore PVC (SWR) couplers |
| 71 | S&F 75mm bore PVC (SWR) couplers |
| 72 | S&F 75 mm bore PVC (SWR) bends any radius |
| 73 | S&F 110 mm bore PVC (SWR) bends any radius |
| 74 | M&L Cement concrete 75mm thick as in plinth protection type C-2,1:3:6 (40mm graded aggregate)even and soomth finished surface without using extra cement. |
| 75 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes;including bedding in cementmortar on to dwarf wall or including fixing cantilever bracketsand connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm |
| 76 | S&F 8mm thick glass corner, radius not exceeding 300mm dia with SS brackets /rail as approved by Engr-in-charge all as specified and directed. |
| 77 | Taking down chowkats or frame n exc 1.5 Sqm each (without taking off shutter from the fram) all as speified and as directed. |
| 78 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete |
| 79 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawingspecification and drawing complete |
| 80 | S&F 75mm long SS butt hinges and fixed to frame with scrwewd or welding comlete.. |
| 81 | S&F for 150mm long aluminium anodized barrel tower bolts of extruded section and fixed |
| 82 | S&F for 100mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge. |
| 83 | M&L for Cleaning out existing joints of floor and wall tiles, filling the joints with white cement paste to match the shade of tiles, removing the excess material, cleaning the tile surface and finishing the joints complete all as specified and directed by Engineer in charge. |
| 84 | Note for all items :- If any item gets repeated in this schedule, the lowest rate quoted for those same items by the L-1 bidder shall be considered for payment and decision of Accepting Officer i.e. GE(AF) Baroda in this regard shall be final and binding. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender