Tender For special Repair To Swimming Pool Of 5 Garh Rif For Obstacle Crossing Training At Garhi Cantt Under Ge Dehradun
Tender Value
39.01 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
19 days left
EMD
78000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Swimming Pool Of 5 Garh Rif For Obstacle Crossing Training At Garhi Cantt Under Ge Dehradun
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Demolition of reinforced cement concrete, of any description complete all as specified and directed. |
| 3 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 4 | Demolition cement concrete (unreinforced) of any description and any position not other wise specifically provided complete all as specified and directed. |
| 5 | Material and labour brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including all quoins, arches, pillars etc complete all as specified and directed. |
| 6 | Material and labour brick work with sub class 'B' brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall including all quoins, arches, pillars etc. complete all as specified and directed. |
| 7 | Taking down cement or cement lime plaster/tile work on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed. |
| 8 | Material and labour rendering 15 mm thick on cement mortar 1:6 finished fair/ unfair faces of brick work finished even and smooth without using extra cement incl chicken wire mesh complete all as specified and directed. |
| 9 | Material and labour rendering 15mm thick on cement mortar 1:4 mixed with water proofing compound on fair/ unfair faces of brick/ concrete surfaces finished even and smooth without using extra cement incl chicken wire mesh complete all as specified and directed.Note: WPC will be measured and paid separately under respective item of this schedule. |
| 10 | Supply only liquid water proofing compound (Dr Fixit or equivalent) @ 0.20 ml per bags of cement complete all as specified and directed. |
| 11 | Material and labour for applying interior grade wall care putty 3 mm thick (in two layers of 1.5 mm thick each) including rubbing surface of first layer to make the surface smooth incl preparation of old/ newly plastered surfaces complete all as specified and directed. |
| 12 | Material and labour for applying exterior grade wall care putty 3 mm thick to (in two layers of 1.5 mm thick each) including rubbing surface of first layer to make the surface smooth incl preparation of old/ newly plastered surfaces complete all as specified and directed. |
| 13 | Material and labour applying two coats of oil bound distemper over a coat of alkali resistant primer on newly plastered or unplastered wall or putty surface including preparation complete all as specified and directed. |
| 14 | Material and labour for applying two coats of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower including preparation of surfaces complete all as specified and directed. |
| 15 | Material and labour for chipping the internal surface of water tanks by deploying expert trademen having experience of working on multistorey builing and tower like structure with latest mechnical tools,T & P with all safety equipment & scalf folding to reach the required height for carrying out etc and clean the surface by brushing & watering etc to make the surface clean and free of paint ,foreign deposites,contaminants etc complete all as specified and directed. |
| 16 | Material and labour for cutting U shaped groove of the internal surface of water tank of Approx 22 mm (W) x 25 mm (D) along the construction joints with chipping tools and filling the U Groove with XYPEX patch N Plug,Aquacreat BA-30 (ARDA), Pidilite or equivallent as approved by E-in-C after application of XYPEX concrete slurry in the groove by brush application @ 0.040 gm/RM complete all as specified and directed. |
| 17 | Material and labour for XPEX Concentrate Aqua Gurard 50 % (ARDA), Pidilite or equivallent as approved by E-in-C unique chemical treatment of water proofing,protection and repair of concrete @ 1.60 Kg/Sqm in two coats after filling the crack and faulty construction joints with XYPEX patch N Plug or equivallent and XYPEX Megamix II or Equivalent here in before as per manufacture all as specified and directed. |
| 18 | Material and labour XYPEX Megamix II, Aquacreat BA -30 (ARDA), Pidilite or equivallent as approved by E-in -C ,12.5 mm thick spray and trowel applied for pathing & resurfacing of deteriorated concrete to produce superior bond low shrinkage,chemical durability & high strength mixed with water at site in mortar like consistency for repair the initial setting time 4 hours & final setting time 7 hours with compressive strenth up to 59 MPA in 28 days as per manufacture specification /date sheet complete all as specified and directed. |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) rubbish off the premises complete all as specified and directed. |
| 20 | Material and labour for 4 mm thick PVC Tiles/Sheets ,laminated plain coloured,marbled mosaic or mottled finish,laid with approved rubber based adhesive in floors complete all as specified and directed. |
| 21 | Material and labour for 4 mm thick PVC tiles/sheets,laminated plain coloured,marbled mosaic or mottled finish laid with approved synthetic adhesive in vertical surfaces complete all as specified and directed. |
| 22 | Material and labour for non-skid coloured ceramic tiles 8 to 10 mm thick (Square/ rectangular) area of each tile exceeding 0.09 Sqm but not exceeding 0.16 Sqm in floors etc set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in white or coloured cement to match the existing surfaces including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 23 | Material and labour for glazed ceramic tiles coloured 9 to 10mm thick , of size n exc 0.72 sqm as in vertical surfaces such as skirting/ dados etc, set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed with white/ coloured cement to match the colour of tiles all as specified and directed. |
| 24 | Material and labour double charged vitrified ceramic coloured tiles 10 mm thick (square/rectangular) polished,area of each tiles exceeding 0.42 sqm and not exceeding .72 Sqm , in floor/wall etc. Set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 25 | Material and labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl dismantling old existing stone complete all as specified and as directed. |
| 26 | Material and labour for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement in ground floor and paving below or above ground level complete all as specified and directed. |
| 27 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed. |
| 28 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed. |
| 29 | Material and labour cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and directed. |
| 30 | Supply and fixing of medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and directed. |
| 31 | Supply and fixing of medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed. |
| 32 | Supply and fixing in repair of vitreous china wash hand basin counter top white size 550mmx400mm fixed on and including, 32 mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fittings etc complete all as specified and directed. |
| 33 | Supply and fixing in repair of 15mm dia brass chromium plated centre hole wash basin mixer /sink with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. |
| 34 | Supply and fixing in repair of 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 35 | Supply and fixing in repair of 15mm bore Bib taps long body cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 36 | Supply and fixing in repair of CP grating 100 mm to 125 dia round fix on floor/ nahani trap with hole/without fixed with cement mortar, complete all as specified and directed. |
| 37 | Supply and fixing in repair of repair CP health faucet with 1.2 mtr metalic expandable tube & hook complete all as specified and directed. |
| 38 | Supply and fixing in repair of 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets complete all as specified and directed. |
| 39 | Supply and fixing in repair of SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum) complete all as specified and directed. |
| 40 | Supply and fixing in repair of PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified and directed. |
| 41 | Supply and fixing in repair of 5 mm thick looking mirror mounted on wall without frame fixed with CP brackets & necessary screws, of size exc 2.5 sqm but n exc 4.5 sqm complete all as specified and direced by Engineer -in-Charge. |
| 42 | Supply and fixing in repair of vitreous chian wash down water closet pan (pedestal pattern) dual flush single piece EWC fancy type,white including,plastic water closet seat,white closed pattern with flat bottom,and cover etc complete all as specified and directed. |
| 43 | Supply and fixing in repair of 75 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall / laid in trenches complete all as specified and directed. |
| 44 | Supply and fixing in repair of 110 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall/ laid in trenches complete all as specified and directed. |
| 45 | Supply and fixing in repair of 75 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete all as specified and directed. |
| 46 | Supply and fixing in repair of 110 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete all as specified and directed. |
| 47 | Supply and fixing in repair of 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets complete all as specified and directed. |
| 48 | Supply and fixing in repair of brass chromium plated towel ring complete all as specified and directed. |
| 49 | Supply and fixing in repair of 32 mm Waste fittings/coupling, brass, chromium plated for sinks, basins, etc. with long screwed shanks and fly-nuts complete all as specified and directed. |
| 50 | Supply and fix rotational moulded polyethylene water storage tanks capacity of tank 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and directed. |
| 51 | Material and labour in repair 75 mm CI spun casted floor trap with grating including jointing with solvent cement 75mm bore outlet complete all as specified and directed. |
| 52 | Supply and fix ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete all as specified and directed. |
| 53 | Supply and fixing in repair of glass corner shelf suitable size made of 5 mm thick toughned glass complete all as specified and directed. |
| 54 | Supply and fixing in repair of glass shelf assembly consisting of 5.5 mm thick toughned glass with chromium plated guard and railing size 500x125 mm with brass bracket complete all as specified and directed. |
| 55 | Supply and fixing of PVC (SWR) vent cowl 75 mm bore complete all as specified and directed. |
| 56 | Supply and fixing of PVC (SWR) vent cowl 110 mm bore complete all as specified and directed. |
| 57 | Supply and fixing of PVC (SWR) branch pieces 75 mm bore single (equal or unequal) with oval access door complete all as specified and directed. |
| 58 | Supply and fixing of PVC (SWR) branch pieces 110 mm bore single (equal or unequal) with oval access door complete all as specified and directed. |
| 59 | Material and labour for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter andone nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc including taking down existing window etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 50.30x26x1.20mm Chowkhat top & sides size: 50.30x26x1.00mm |
| 60 | Supply and fixing of aluminum alloy powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200 mm size, one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make:- Sandhu/Ritz) shutter to be partly glaze with 5mm thick tined coloured glass in upper pannel and partly pannelled with 12mm thick both side laminated particle board in lower pannel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw etc including taking down existing ddor etc complete all as specified and directed at site. Chowkhat Frame:- 101.60x44.45x1.60mm Shutter verticle style :- 85x44.45x1.56mm Shutter middle Rail :- 83.50x44.45x1.54mm Shutter Top Rail and bottom Rail :- 114.30x44.45x1.55mm |
| 61 | Taking down chowkat with shutter area exc 1.5 sq.m but n.exc 4 Sqm each complete all as specified and directed. |
| 62 | Taking down chowkat with shutter area n.exc 1.5 sqm each complete all as specified and directed. |
| 63 | Supply and fixing of factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed. |
| 64 | Supply and fixing of 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed. Please Enable Macros to View BoQ information |
| 65 | Supply and fixing of 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender