Tender For Petty Repairs To Otm And Md Accn Of Med Line, Vk Line, Makronia Complex, Engrs, 536 Asc Rou, Hawk Hill Area Etc Under Ge Saugor
Tender Value
20 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
0 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Petty Repairs To Otm And Md Accn Of Med Line, Vk Line, Makronia Complex, Engrs, 536 Asc Rou, Hawk Hill Area Etc Under Ge Saugor
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-Aug-2026 |
| 2 | 22-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | NOTE:-Attending day to day complaints related to wooden / joinery work complete all as specified and directed. Note: Material required shall be paid under respective item here-in-under. The minor material like screws, nails glue etc and any material other than those mentioned in this BOQ but required to complete the Job shall be deemed included in quoted unit rates. |
| 2 | Checking & attending complaints pertaining to joinery (wooden ) iron/ aluminium mongery, pelmet box, etc requiring carpentry work and carrying out minor repairs such as tightening/replacing of screws/nails, minor adjustment/easing of joinery, door etc. including petty repairs and material like screws/nails, plug, butt hinges 50/75/125mm etc. to make it functional by providing minimum one carpenter/ aluminium fabricator and one helper at 9.00am to JE concerned/ Engr-in-Charge (with necessary tools) complete all as specified and directed . Note : (i) Any builders hardware items except mentioned above required to be replaced shall be paid seperatly under respective item. (ii) Note:-The complaints intimated to contractor shall be completed to the entire satisfaction of Engr-in-Charge within a period of maximum 02 days and an amount of Rs. 1000.00 will be recovered for un-attended complaints. |
| 3 | Checking and attending complaint pertaining to joinery for aluminium doors/windows carrying out minor repairs such as tightening/replacing of screws/nails, minor adjustment/easing of joinery, door etc. including petty repairs and material like screws/nails, plug, butt hinges 50/75/125mm etc. to make it functional by providing minimum one carpenter/ aluminium fabricator and one helper at 9.00am to JE concerned/ Engr-in-Charge (with necessary tools) complete all as specified and directed . Note : (i) Any builders hardware items except mentioned above required to be replaced shall be paid seperatly under respective item. (ii) Note:-The complaints intimated to contractor shall be completed to the entire satisfaction of Engr-in-Charge within a period of maximum 02 days and an amount of Rs. 1000.00 will be recovered for un-attended complaints. |
| 4 | Checking and attending to welding repairs works to steel windows, handles, door springs, iron frame of doors, rolling shutter of garages and other misc iron repair works by welding (run or spot welding as per site requirement) by providing minimum one welder and one helper alongwith welding machine, gloves, welding glass, welding rod etc or any other tools required, at 9.00am to JE concerned/ Engr-in-Charge and whenever required complete all as specified and directed. Note:-The complaints intimated to contractor shall be completed to the entire satisfaction of Engr-in-Charge within a period of maximum 02 days and an amount of Rs. 1000.00 will be recovered for un-attended complaints. |
| 5 | Checking of floor, plinth, plaster etc requiring masonary work and carrying out minor repairs such as broken edges patches etc, including petty repairs, material like sand, cement & stone aggregates to make it functional by providing minimum one mason and one helper at 9.00am by JE concerned/ Engr-in-Charge (with necessary tools) etc. complete all as specified and directed . Note:- (i) Any items required to be replaced or major repair shall be paid under respective items. (ii) Note:-The complaints intimated to contractor shall be completed to the entire satisfaction of Engr-in-Charge within a period of maximum 02 days and an amount of Rs. 1000.00 will be recovered for un-attended complaints. |
| 6 | Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumbing work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), caps/spindle for taps, M-seal, screws, nails etc to make water supply/ plumbing lines functional and leak proof by providing minimum one plumber and one helper at 9.00am by JE concerned/ Engr-in-Charge (with necessary tools) etc. complete all as specified and directed . Note:-The complaints intimated to contractor shall be completed to the entire satisfaction of Engr-in-Charge within a period of maximum 02 days and an amount of Rs. 1000.00 will be recovered for un-attended complaints. |
| 7 | Note for Item No 01 to 05:-(i) The contractor or his authorised representative shall report daily to the concerned JE in the office of AGE B/R-II at 09:00 hrs to collect the complaint slip / Docket. (ii) The complain(s) shall be resolve within 48 hrs without fail. If the time line is not complied by the contractor for resolving the issue, he/ she shall be laible to pay a penalty @ Rs.250/- per unresolved complaint per day subject to the maximum Rs.1000/- per complaint. (iii) To resolve the complain within specified time line contractor may required to deploy more than one / any number of trade men & helpers. No extra claim what so ever on this ground shall be admissible.(iv) The contractor shall maintain the complain slip / Docket wise record of complaint (s) attended / resolved and the material used for resolving complaint (s) in a pakka bound register. Each complaint (s) recorded in repair shall be verified by the JE concerned and approved by Engg-in-Charge concerned.(v) Contractor shall produce the copy of the register maintaned alongwith each RAR. Producing the copy of replies shall be mandatory requirement for payment of RAR.(vi) On complition of work, the contractor shall deposit the register to Engineer-in-Charge who will furnish a certificate to this effect at the time of recommendation of completion of the work. Work will not be treated as complete if the contractor not deposit the record register duly maintained in all respect.(vii) The contractor shall maintain a record of all complaints in a Pakka bound Register as per format given in tender document. The copy of such record shall be made form part of each RAR and Final Bill. (viii) On completion of work, the contractor shall deposit the register to Engineer-in-charge who will furnish a certificate to this effect at the time of recommendation of completion of the work. Work will not be treated as complete if the contractor not deposit the record registers duly maintained in all respects. |
| 8 | Cleaning of blocked WC/ Bath/WHB/Sink traps and CI /PVC pipe upto 1st manhole and removing all silt, residue sludge both organic and inorganic nature including any type of foreign material and removing waste material sludge etc to a distance exceeding 50m any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of Engr-in-Charge complete all as specified and directed.Note:- The complaint intimated to contractor shall be completed to the entire satisfaction of Engr-in-Charge. |
| 9 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening n'exc 1.5 Sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonary work of any discription in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fastners shall be measured and paid seperatly in respective item hereunder. |
| 10 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening exc 1.5 sqm and n'exc 4.00 sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonary work of any discription in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fastners shall be measured and paid seperatly in respective item hereunder |
| 11 | Taking down shutters of any descreption not exc 1 Sqm including removing from site complete all as specified and directed. |
| 12 | Taking down shutters of any descreption exc 1 Sqm but not exc 2 Sqm each including removing from site complete all as specified and directed. |
| 13 | M&L for 2nd class hardwood (Sal) as in scantlings, timber clean sawn, 40Sqcm and over in section, framed and fixed including two coats of synthetic enamel paint over a coat of pink primer (after preparation of surface) and dismantling existing scantlings of any discription in any position complete all as specified and directed. |
| 14 | M&L for 35 mm thick second class hardwood rail and style plain framed panelled shutters (in two panels) locally fabricated with lock rails and panel of 9mm thick BWP comercial ply with comercial veneering on both faces. The size ofrail and stile as per IS-1003 complete all as specified and directed. |
| 15 | M&L for 2nd class HW (Teak) glazed and skeleton shutters ( factory made), 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.20 (a); for doors supplied and fitted to chowkhats complete all as specified and directed. |
| 16 | M&L for 2nd class HW (Teak) glazed and skeleton shutters ( factory made), 30 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (b); for doors supplied and fitted to chowkhats complete all as specified and directed. |
| 17 | M&L for 30mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides fixed to frame complete all as specified and directed. |
| 18 | M&L for two coats of synthetic enameled paint over a coat of pink primer including preparation of new wooden and wood based material, over 10 cm width or girth complete all as specified and directed. |
| 19 | M&L for preparing of surfaces of wood and wood based materils, steel or iron work, new or old and any description and treating with tar, black paint etc ends of posts backs of chowkhats area tarred exc 0.10 Sqm but n. exc 0.50 Sqm each complete all as specified and directed. |
| 20 | S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, suppling & fixing in opening with fastners (10mm dia, 100mm long, min 6 Nos as per specification complete all as specified and directed. |
| 21 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 5 mm thick moulded PVC sheet on the front face & 5mm prelam PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 22 | M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in coping, kerb, haunching, bed blocks for hold fast, etc including necessary formwork complete all as specified and directed. |
| 23 | S&F for mild steel tower bolts of 200mm long stove enamelled black with bright bolt fixed with screw complete all as specified and directed. |
| 24 | S&F for mild steel tower bolts of 150mm long stove enamelled black with bright bolt fixed with screw complete all as specified and directed. |
| 25 | S&F for mild steel pressed handles, oval type stove enamelled black of 125mm long fixed with screw complete all as specified and directed. |
| 26 | S&F100mm long mild steel butt hinges with medium weight cold rolled with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed. |
| 27 | S&F butt hinges medium weight, cold rolled mild steel 125mm size complete all as specified and directed. |
| 28 | S&F 150mm long aluminium anodised barrel tower bolt , extruded section cast alluminium alloy complete all as specified and directed. |
| 29 | S&F 150 mm long door stopper made of aluminium alloy body and tongue, anodised fixed in door with stainless screws etc complete all as specified and directed. |
| 30 | S&F 150mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 31 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 32 | S&F 150mm size extruded aluminium alloy handle, fabricated type, anodised complete all as specified and directed. |
| 33 | S&F galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.45mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 34 | S& F glazed (5.0 mm thick plain / coloured glass) aluminum door powder coated consisting of frame of 91mm x 44 mm size with shutter fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floor Door shutter consists of top rail size is 83 x 44 mm , bottom rail & lock rail size is 101 x 44 mm & style of door shutter is 83mmx 44 mm with handles 2 Nos in each door , hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangemen,floor spring and floor door stopper incl. necessary joining cleats , glazing clips etc complete (Aluminum section thickness 2 mm } ) confirming to IS. Make - Jindal Aluminum / Man Industries or equivalent as approved by GE. |
| 35 | S&F in repairs heavy duty double action floor spring hydraulically regulated, made up of min 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 36 | S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium wire mess 0.36 mm dia and width of aperture 1.45mm to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed. (Al. section thickness 1.50 mm } |
| 37 | S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 32mm side and top of size min 92.34X29.70, shutters vertical 39X20 mm, shutter top & bottom of size min 20X39 mm , shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 4 mm thick tinted glass with rubber gasket,brush and aluminium beading ,aluminium wire mess 0.36 mm dia and width of aperture 1.45 mm etc including necessary cutting holes on wall and floor and confirming to IS complete all as specified and directed. (Al. section thickness 1.50 mm } |
| 38 | S&F in repair for Hasp and staple safety type Aluminium anodised with MS hinge pin including bolt to hinge pin of 125 mm size fixed with screw complete all as specified and directed. |
| 39 | S&F in repair mild steel pressed handles, oval type stove enamelled black of 150mm long fixed with screw complete all as specified and directed. |
| 40 | S&F in repair 100mm long mild steel butt hinges with medium weight cold rolled fixed in repair with screws/welding complete all as specified and directed. |
| 41 | S&F in repair for continuous (piano) hinges mild steel bright finish or electro galvanised width of width of flaps nexc 30 mm (when open), complete all as specified and directed. |
| 42 | S&F in repair 150mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 43 | S&F in repair galvanised mild steel/ SS wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.45mm and fixed with tinned tacks, or galvanised/ ss wire staples complete all as specified and directed. |
| 44 | S&F in repair 125mm size extruded aluminium alloy handle, fabricated type, anodised complete all as specified and directed. |
| 45 | S&F in repair 150mm long aluminium anodised barrel tower bolt , extruded section cast alluminium alloy complete all as specified and directed. |
| 46 | S&F in repair 100mm long aluminium anodised barrel tower bolt , extruded section cast alluminium alloy complete all as specified and directed. |
| 47 | S & F for door closer hydraulically regulated, designation No. 3, universal type, aluminium die-cast body (ISI Marked), suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed |
| 48 | S&F in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 49 | S&F in repair 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts plate and nuts, four on bolts and two on staple plate in wooden shutters and welded /diveresed in steel shutter complete all as specified and directed. |
| 50 | S&F in repair for 2nd class hardwood plan fillet section area not exceeding 3Sqcm for glazed or gauged joinery, ceiling including secured with nails, complete all as specified and directed. |
| 51 | S&F in repair floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel fixed in floor with over all length of cover plate 140mm complete all as specified and directed. |
| 52 | S&F in repair rubber door seal 32mm wide with aluminium strip of size 19mm wide fixed with machine steel screw with washer suitable for aluminium /wooden door shutters complete all as specified and directed. |
| 53 | Hacking out old broken glass of (any thickness, size, quality or description) from metal frame / wooden frame fixed with clips and putty complete all as specified and directed. |
| 54 | S&F sheet glass, 3mm thick selected quality fixed with clips and putty complete in squares n.exc 0.50Sqm each pane complete all as specified and directed |
| 55 | S&F 4mm thick sheet glass ordinary quality frosted on side fixed wdn beads/oil putty in square n.ex 0.50Sqm in each pane complete all as specified and directed. |
| 56 | S&F in repair of plain aluminium sheet 0.71mm thick as in wall / door cladding complete all as specified and directed. |
| 57 | S & F in repair Framed work such as grills, gratings, doors etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; angle iron chowkhats, AC stands/chajja, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.410-0including dismaltiling old wrought iron of mild steel work of any description not otherwise provided complete all as specified and directed. |
| 58 | S&F in repairs PVC connections with PTMT nuts 15mm bore, 450 in length complete all as specified & directed. |
| 59 | S&F in repairs PVC waste pipe 32/40 mm dia, up to 90cm long for WHB with cup, complete all as specified and directed |
| 60 | S&F in repair 32mm/40mm dia CP sink/wash hand basin waste coupling of PTMT ISI Marked complete all as specified and directed |
| 61 | S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms), complete all as specified and directed |
| 62 | S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 25 mm bore (minimum weight 455 gms), complete all as specified and directed . |
| 63 | S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 15 mm bore (minimum weight 142 gms), complete all as specified and directed |
| 64 | S&F in repair vitreous china wash hand basin, white, with pedstal flat back, size 550 x 400mm Including waste coupling ,waste pipe and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. . Note : Pillar tap and PVC connection will be measured paid separetly. |
| 65 | S&F in repairs 15 mm dia bib tap standard of PTMT any colour, high pressure screwed for iron pipe with minimum weight 90 gms, complete all as specified and directed |
| 66 | S&F in repair 15 mm dia brass chromium plated long body Bib tap fancy type with capstan head screwed down for iron pipe complete in all respect as specified.Make :Jaquar or equivalent in Kohler/Hans Grohe |
| 67 | S&F in repairs pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore, complete all as specified and directed. |
| 68 | S&F in repairs stop valves/ angle valve cast copper alloy, screwed down, high pressure, capstain head with long shank & cup / with crutch or butter fly handle, fancy type, chromium plated, screwed both ends for iron pipe or for unions 15 mm bore complete all as specified and directed. |
| 69 | S&F in repair 15mm bore dia Exposed part kit of single lever basin mixer wall mounted consisting of operating lever, cartridge sleeve, nipple & spout, with colour Blush Gold PVD (Colour Rose Gold) Jaquar or equivalent in Kohler/Hans Grohe with concealed body for single lever basin mixer wall mounted Jaquar or equivalent in Kohler/Hans Grohe incl all required accessories/ fixture to make operation complete in all respect as specified and directed by Engr-in-Charge. |
| 70 | S&F in repairs CP wall mixer 3 in 1 system with provision for both Hand shower and over head shower complete with 115mm long bend pipe connecting legs & wall flange complete all as specified and directed . |
| 71 | S&F in repair Hand Shower (Health Faucet) with 8 mm dia, 1 meter long flexible tube & wall hook with Blush Gold PVD with check nut and washers complete all as specified. Make : Jaquar or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 72 | S&F in repairs CP jet spray with 8mm dia, 1 meter long flexible tube & wall hook/one piece water closet including flexible pipe and brass chromium plated nuts screwed for iron pipe bore dia 15mm complete all as specified and directedMake: Jaquar or equivalent in Kohler/Hans Grohe |
| 73 | S&F in repairs vitreous China wash down water closet pan (pedestal pattern),white/ coloured, with and including plastic water closet seat cover, coloured, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, including fixing bolts, and flush pipe and connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc., complete all as specified and directed. |
| 74 | S&F in repairs vitreous China squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified and directed |
| 75 | S&F in repair PVC valve less syphonic action type flushing cistern 10 ltr capacity, low level, white with inlet, ball valve, float and handle including brackets and connection to pipes and fixing of chain and pull or lever, Flushing control kit if any complete all as specified and directed.Make : Jaquar /Kohler/ Grohe |
| 76 | S&F in repair PVC valve less syphonic action type flushing cistern 10/5 ltr capacity, low level, Flushing control kit if any complete all as specified and directed.Make : Jaquar /Kohler/ Grohe |
| 77 | S&F in repairs PVC lid cover for water tank of capacity 500/1000 litres complete all as specified and directed |
| 78 | S&F in repair 15mm medium grade galvanised steel tubes with all fittings and dixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 79 | Supply and laying for 16 mm outer dia CPVC pipes, SDR 11 grade including fittings on walls/ceiling or laying in floors including taking down existing tubing of any description complete all as specified and directed.Note : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 80 | S&F in repair 20mm medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 81 | S&F in repair 15mm GI fittings like socket, Nipple, Elbow, Tee or union etc complete all as specified and directed. |
| 82 | S&F in repair 20mm GI fittings like socket, Nipple, Elbow, Tee or union etc complete all as specified and directed. |
| 83 | S&F in repair mild steel 19mm/20mm tubular rod, 1.6mm thick, fancy type including PVC golden colour brakets, latto and wall to wall socket complete all as specified and directed. |
| 84 | S&F in repair kitchen sinks with drainage board, made out of 304 grade 0.8mm/1.0mm thick stainless steel sheet with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 85 | Fixing only in repairs Stainless steel Plate Rack, 900mmx600mmx250mm in size, made of 1mm thick 202 grade stainless steel sheet complete all as specified and directed. |
| 86 | S&F corner glass self with brackets of jaquar or equivalent make as approved by GE Complete all as specified and as directed. |
| 87 | S&F purposely molded looking mirror 5mm thick glass fixed with studs complete all as specified and directed.Make : Saint-Gobin/Modi Guard/Asahi India (AIS) |
| 88 | S&F in repair CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed. |
| 89 | S&F in repair Toilet roll holder with stain less steel-304 Grade flap with paper holder complete in all respect complete as specified and directed.Make: Jaquar or equivalent in Kohler/Hans Grohe |
| 90 | S&F in repairs plastic water closet seat cover for recessed or flat EWC white, with flat bottom and cover incl. PVC or chromium plated hinging device complete all as specified and directed . |
| 91 | S& F in repairs looking mirror of selected quality glass 6-8 mm thick mounted or fixed to wall with chromium plated brass screws and cup washers etc complete all as specified and directed . |
| 92 | S&F in repair counter top vitreous china wash basin, white, Including waste coupling ,waste pipe, pvc connections complete all as specified and directed. Note : Pillar tap and PVC connection will be measured paid separately.Make : Jaquar or equivalent in Kohler/Hans Grohe |
| 93 | S&F in flush pipe of polyethylene of low or high density or PVC. 32mm dia, for low level cisterm including joints complete all as specified and directed. |
| 94 | S&F in repairs soap dish, 'oval' type chromium plated of approximate size 100mm x 50mm x 10 mm, fixed to plugs with screws complete all as specified and directed |
| 95 | S&F in repairs grating dome 100 mm of CP (Min weight 25 gm) floor trap and fixed with white cement complete all as specified and directed |
| 96 | S&F in repairs 15mm any length of body piller cock standered of PTMT any colour screwed for iron pipe and dixed complete all as specified and directed (Note weight not less than 110gms) |
| 97 | M&L for vitrified, joint free, colored ceramic tiles, 10mm thick (Square or rectangular), area of each tile exc 0.38 sqm but not exceeding 0.42 sqm, in floors etc set over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or colored cement to match with the color of tiles complete all as specified and directed. |
| 98 | M&L for non skid, joint free, coloured ceramic tiles, 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 99 | M&L for digital glazed ceramic tiles, coloured tiles 300mm x 600mm x 7mm thick on vertical surfaces ie. as in skirting/dado etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick screed in cement mortar (1:4) complete all as specified and directed. |
| 100 | M&L for 60mm thick factory made chamfered edge cement concrete colour paver block of M-35 grade, as in footpath, parks, lawns, drive ways or light traffic parking etc, chemically treated, laid in approved colour, design/ pattern, size and shape over and including 50mm thick uniformly leveled surface of stone dust cushioning, filling the joints with sand, finishing and sweeping extra sand complete including dismantling of old unserviceable existing provision complete all as specified and directed.Make : Mehtab tiles Indore(Mehtab)/ Nitco(NITCO)/ Sagar tiles Shaanpur (Sagar) |
| 101 | Taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 102 | M&L for 15 mm thick rendering in cement mortar (1:6) on brick / concrete/ stone walls, surfaces finished even and fair on fair faces without using extra cement including taking down of existing plaster of any description, complete all as specified and directed. |
| 103 | M&L for 20mm thick cement plaster on brick / concrete/ stone surfaces in two coat (Ist coat 15mm thick in CM 1:6 and 2nd coat 5mm thick in CM 1:4 mixed with liquid WPC @ 200ml Per liter) complete all as specified and directed.Note:-WPC will be paid separately under respective item. |
| 104 | Demolition of brick work or stone/ boulder masonry work built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 105 | M&L for Brickwork with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in Cement mortar 1:6 complete all as specified and directed. |
| 106 | M&L for preperation of newely / plastered surface of wall / ceiling and applying two coats of Acrylic washable distemper over a coat of primer with alkali resistant complete all as specified and directed. |
| 107 | M&L for 3 coats of white wash on newly plastered wall surfaces including preparation of newely plastered surfaces complete all as specified and directed. |
| 108 | M&L for two coats of cement base wall care putty in two coats @ 1Kg/Sqm (0.5Kg in each coat) on new/old (duly removed existing treatment completely) plastered surface of wall as preparatory work to painting including cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and made ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Berger |
| 109 | Demolition of cement concrete in any description and in any position not otherwise specially provided complete all as specified and directed |
| 110 | M&L Providing precast cement concrete Type C1 (1:3:6 20 mm graded aggregate) in win- dow or door cills, lintels,bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, Watherings, throat- ing etc. and setting in cement mortar(1:6) complete with joints to match complete all as specified and as directed. |
| 111 | M&L for 25mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in sub base of floors complete all as specified and directed. |
| 112 | M&L for PCC (1:3:6), type C-2 (using 40mm graded stone aggregate) as in foundations/ mass concrete complete all as specified and directed. |
| 113 | M&L for preperation two coats of synthetic enameled paint over a coat of red oxide including preparation of new steel surfaces of any description over 10 cm width or girth complete all as specified and directed. |
| 114 | S&F GI (Cold rolled) snap grid size 600mm x 600mm frame work of 24x38x0.60mm tee section (bottom pre coated) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire of dia 4mm as per manufacturer instruction as in ceiling with and including S&F white non asbestos designer ceiling cement boards 4mm thick complete all as specified and directed. |
| 115 | Demolition of existing ceiling boards (fiber, pulp insulation etc) or insulation board/slabs/blankets, any thickness, including frames complete all as specified and directed by engineer in charge Please Enable Macros to View BoQ information |
| 116 | Demolition of existing ceiling boards (fiber, pulp insulation etc) or insulation board/slabs/blankets, any thickness, including frames complete all as specified and directed by engineer in charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 22, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 27, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
TodayAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender