Tender For special Repair Of Internal Roads, Minor Connected Roads And Rd Furniture In Aor Of Age B/R-Ii Under Ge Dinjan
Tender Value
1.08 Crore
Estimated cost
Bid Submission
18 Aug 2026
22 days left
EMD
1.83 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tinsukia → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Internal Roads, Minor Connected Roads And Rd Furniture In Aor Of Age B/R-Ii Under Ge Dinjan
BOQ
| Sl. No. | Item Description |
| 1 | M&L for scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm, n.exc 50mm deep removing and depositing to low lying area all as specified. |
| 2 | Laying and compacting 75mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant, material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass spreading with sensor paver and rolling with vibratory roller of capacity 80-100KN static weight and cxonsolidating to required gradient and camber complete all as specified and directred. |
| 3 | M&L for premix bituminous, macadam with 4.5% binder (paving bitumen ) laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directred. |
| 4 | M&L for preparing unsurfaced Wet Mix Macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. all as specified and directed by Engineer-in-Charge. |
| 5 | M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. all as specified and directed by Engineer-in-Charge. |
| 6 | M&L for applying evenly a priming/tack coat with bituminous primer using paving bitumen at Per 10 Kg/XSqm all as specified and directed by Engineer-in-Charge. |
| 7 | M&L for applying evenly a priming/tack coat with bituminous primer using paving bitumen at Per 5 Kg/XSqm all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for Bituminous premix asphaltic semi dense concrete 40 mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient using paving bitumen any penetration complete all as specified and directed |
| 9 | Repair to potholes, any depth, not exc. 1.00 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @5 Kg/ X sqm, putting in premixed bituminous macadam , well rammed and sealed with binder (paving bitumen VG-30) 9.80 Kg per /10 Sqm.blinded with 0.09 cum of stone chippings @ 6.03mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exceeding 30 mm complete all as specified and directed. |
| 10 | Supply and fixing cat eye solar reflective type of metal body alloy aof size 100mm x 100mm x 20mm with PAMA striplens reflector of model No DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions |
| 11 | S&F road safety Convex mirror model No OS-790 from OSCAR safety solutions with 80 CM dia,including excavation of post holes in hard/dense soil, filling of mass concrete type D-2 (1:4: 8) using 20mm graded aggregates in fdn ( 0.30 x0.30 x 0.45 M) and removal of surplus soil complete all as directed by Engineer-in-Charge. |
| 12 | Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all asspecified and directed |
| 13 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed |
| 14 | S&F ABS speed breaker/rubber rumbler model No OS-792 including fixing with epoxy compound and anchoring with nails complete all as directed by Engineer-in-Charge. |
| 15 | Supplying & fixing retro reflective sign board made of high intensity retro reflective sheeting pasted on both sides of 3mm thick ACP sheet with letters/grphics to be overlayed high intensity retro reflective sheeting of make 3M/Avery densioin as approved by I.R.C./MORTH duty plotted cut of approved colour fixed with SS frame work complete all as specified and directed by Engineer-in-Charge.Note : SS Frame work will be measured as paid seperately. |
| 16 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement and similar work complete all as specified and as directed. |
| 17 | M&L for preparing bituminous roads Painting lines, dashes, arrows, letters, etc. or roads pavements and the like exc 10cm wide with road marking paint, white or golden yellow ( for thermoplastic road/pavement marking approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete in all respect with 2.5 mm thick layer of marking and 250 gm/sqm glass beads consumed in per sqm ratio all as specified and directed |
| 18 | Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/loose soil for repair of road side berms. |
| 19 | M&L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering. |
| 20 | Removing excvated soil n exc 50mtr and depositing where directed at a level n exc 1.5 above starting point. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender