Tender For Provn Of Store Room At 261 Transit C Banihal Under Age (I) Bhalra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Aug 2026
15 days left
EMD
19256
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagrota → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Store Room At 261 Transit C Banihal Under Age (I) Bhalra
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out soft/loose soil complete all as specified and directed by Engr-in-Charge |
| 2 | Excavation over area n .exc 1.50m deep and getting out in any type of soil.by mechanical means including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and directed by Engr-in-Charge |
| 3 | M & L for hardcore of guage exc 63 mm but n.exc 100 mm deposited spread and levelled in layers n.exc 15 cm thick watered and rolled/rammed to a true surface with broken bricks complete all as specified and directed by Engr-in-Charge |
| 4 | M & L for cement concrete in foundation filling, subbase and mass concrete type D2 1:4:8 (40 mm graded aggregate) complete all as specified and directed by Engr-in-Charge |
| 5 | RCC M-25 Design mix as in foundations including raft footing, foundation beam and plinth beam , bases of column complete all as specified and directed by Engr-in-Charge |
| 6 | RCC M-25 Design mix as in column, pillar, piers, post and struts etc complete all as specified and directed by Engr-in-Charge |
| 7 | M&L RCC M25(Design mix)Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-Charge |
| 8 | M&L for RCC M25 (Design mix) for slabs supported on walls beams and columns in floors roofs, landings, balconies, canopies,deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge |
| 9 | Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed by Engr-in-Charge |
| 10 | Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engr-in-Charge |
| 11 | M & L for Steel reinforcement TMT bars 10 mm dia and over cut to length, bent to shape and tying with annealed MS wire 0.9mm dia complete all as specified and directed by Engr-in-Charge |
| 12 | ditto as per item above but 8mm complete all as specified and directed by Engr-in-Charge |
| 13 | Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of rough finished surfaces complete all as specified and directed by Engr-in-Charge |
| 14 | Formwork to sides of concrete Fdn ,footing ,base of column and raft beam sides and soffit of plinth beam complete all as specified and directed by Engr-in-Charge |
| 15 | Formwork to sides of pillar, post , struts, piers , column square ,rectangular or polygonal rough finished surface of concrete complete all as specified and directed by Engr-in-Charge |
| 16 | M& L for Formwork to soffits of suspended slabs such as roof slabs,floors slabs,landings and similar work not exceeding 200mm thick horizontal or sloping complete all as specified and directed by Engr-in-Charge |
| 17 | M & L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6 m mean radius in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge |
| 18 | M&L for Rendering 15 mm thick cement plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces of wall and to be finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge |
| 19 | M&L for Rendering 15 mm thick cement plaster in cement mortar (1:4) on other than fair faces of brick work and surfaces to be finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.(incl all necessary scaffolding, lifting arrangement) |
| 20 | M&L two coats of cement based paint on newly plastered surface including preparation complete all as specified and directed by Engr-in-Charge |
| 21 | M&L for two coats of oil bound distemper of wall to newly plastered surfaces including preparation of surfaces complete all as specified and directed by Engr-in-Charge |
| 22 | S&F Pre -painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge |
| 23 | S&F Pre -painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge |
| 24 | S&F for structural steel works of Fe 410W (Gde E 250) quality A, as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including painted one shop coat of zinc chromate/red oxide primer paint (including preparation of surface) before fabrication complete all as specified and directed by Engr-in-Charge |
| 25 | Painting to steel surfaces of any description over 10 cm in width or girth not otherwise described for two coat of synthetic enamel paint over a coat of red oxide, zine chrome complete all as specified and directed by Engr-in-Charge |
| 26 | S&F Pressed steel frames for door (Factory made) out of 1.25 mm thick black MS sheet, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc. complete, size of frame 105x60mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3 mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C0 using 12.5 mm graded crushed stone aggregate including one shop coat of red oxide primer complete all as specified and directed. Note: PCC 1:3:6 type C-O as in backfill will be paid separately. Please Enable Macros to View BoQ information |
| 27 | S&F Pressed steel frames for door (Factory made) out of 1.25 mm thick black MS sheet, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc. complete, size of frame 105x60mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3 mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C0 using 12.5 mm graded crushed stone aggregate including one shop coat of red oxide primer complete all as specified and directed. Note: PCC 1:3:6 type C-O as in backfill will be paid separately. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender