Tender For Repair/ Maintenance Of Centrifugal/ Monoblock/ Submersible And Allied Water Supply Work In Domestic And Smq Area At Bhisiana Under Ge (Af) Bhisiana
Tender Value
20 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
13 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Centrifugal/ Monoblock/ Submersible And Allied Water Supply Work In Domestic And Smq Area At Bhisiana Under Ge (Af) Bhisiana
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches (Manual), not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations of shafts, wells, cess pits, manholes, pipe line, cable in trenches etc., not exceeding 10 Sqm on plan and getting out in any type of soft including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed. |
| 2 | Returning, filling including spreading, leveling watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified and as directed. |
| 3 | Removing excavated material (surplus soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed. |
| 4 | Supply and fixing in replacement of Ductile iron pipe (ISI marked) class K-9, bore 80mm, confirming to IS : 8329-2K, spigot & socketed ends centrifugally cast, including rubber tyton joints (Push-on joint) laid in trenches, including taking up or down old unserviceable pipe including cutting of existing pipe as required, complete all as specified and directed by Engineer-in-charge.Note : (i) Excavation and Earth work shall be measured and paid separately under respective item of BOQ |
| 5 | Supply and fixing in replacement of Ductile iron pipe (ISI marked) class K-9, bore 100mm, confirming to IS : 8329-2K, spigot & socketed ends centrifugally cast, including rubber tyton joints (Push-on joint) laid in trenches, including taking up or down old unserviceable pipe including cutting of existing pipe as required, complete all as specified and directed by Engineer-in-charge.Note : (i) Excavation and Earth work shall be measured and paid separately under respective item of BOQ |
| 6 | Supply and fixing in replacement of Ductile iron pipe (ISI marked) class K-9, bore 150mm, confirming to IS : 8329-2K, spigot & socketed ends centrifugally cast, including rubber tyton joints (Push-on joint) laid in trenches, including taking up or down old unserviceable pipe including cutting of existing pipe as required, complete all as specified and directed by Engineer-in-charge.Note : (i) Excavation and Earth work shall be measured and paid separately under respective item of BOQ |
| 7 | Supply and fixing in replacement of Ductile iron pipe (ISI marked) class K-9, bore 200mm, confirming to IS : 8329-2K, spigot & socketed ends centrifugally cast, including rubber tyton joints (Push-on joint) laid in trenches, including taking up or down old unserviceable pipe including cutting of existing pipe as required, complete all as specified and directed by Engineer-in-charge.Note : (i) Excavation and Earth work shall be measured and paid separately under respective item of BOQ |
| 8 | Supply and fixing in replacement of steel water GI tubing 15 mm bore ISI marked medium grade galvanised including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road/along wall etc, including taking up or down old unserviceable pipe including cutting of existing pipe as required. complete all as specified and as directed.(Note:- Excavation and Earth work if required shall be measured and paid separately under respective item of BOQ) |
| 9 | Supply and fixing in replacement of steel water GI tubing 20 mm bore ISI marked medium grade galvanised including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road/along wall etc, including taking up or down old unserviceable pipe including cutting of existing pipe as required. complete all as specified and as directed.(Note:- Excavation and Earth work if required shall be measured and paid separately under respective item of BOQ) |
| 10 | Supply and fixing in replacement of steel water GI tubing 25 mm bore ISI marked medium grade galvanised including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road/along wall etc, including taking up or down old unserviceable pipe including cutting of existing pipe as required. complete all as specified and as directed.(Note:- Excavation and Earth work if required shall be measured and paid separately under respective item of BOQ) |
| 11 | Supply and fixing in replacement of steel water GI tubing 50 mm bore ISI marked medium grade galvanised including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road/along wall etc, including taking up or down old unserviceable pipe including cutting of existing pipe as required. complete all as specified and as directed.(Note:- Excavation and Earth work if required shall be measured and paid separately under respective item of BOQ) |
| 12 | Supply and fixing in replacement of steel water GI tubing 80 mm bore ISI marked medium grade galvanised including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road/along wall etc, including taking up or down old unserviceable pipe including cutting of existing pipe as required. complete all as specified and as directed.(Note:- Excavation and Earth work if required shall be measured and paid separately under respective item of BOQ) |
| 13 | Supply and fixing in replacement of steel water GI tubing 100 mm bore ISI marked medium grade galvanised including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road/along wall etc, including taking up or down old unserviceable pipe including cutting of existing pipe as required. complete all as specified and as directed.(Note:- Excavation and Earth work if required shall be measured and paid separately under respective item of BOQ) |
| 14 | Supply and fixing of Mechanical joint/D joints upto 300mm length suitable for 80/50/40 mm bore CI pipe/GI pipe, including cutting of pipe, complete joint with nuts, bolts and washers, gasket etc complete all as specified and as directed by Engineer in charge.Note :- (i) Excavation and earth work shall be measured & paid separately under appropriate item of this Schedule/BOQ.) |
| 15 | Supply and fixing of Mechanical joint/D joints upto 300mm length suitable for 100 mm bore CI pipe/GI pipe, including cutting of pipe, complete joint with nuts, bolts and washers, gasket etc complete all as specified and as directed by Engineer in charge.Note :- (i) Excavation and earth work shall be measured & paid separately under appropriate item of this Schedule/BOQ.) |
| 16 | Supply and fixing of Mechanical joint/D joints upto 300mm length suitable for 150 mm bore CI pipe/GI pipe, including cutting of pipe, complete joint with nuts, bolts and washers, gasket etc complete all as specified and as directed by Engineer in charge.Note :- (i) Excavation and earth work shall be measured & paid separately under appropriate item of this Schedule/BOQ.) |
| 17 | Supply and fixing of Mechanical joint/D joints upto 300mm length suitable for 200 mm bore CI pipe/GI pipe, including cutting of pipe, complete joint with nuts, bolts and washers, gasket etc complete all as specified and as directed by Engineer in charge.Note :- (i) Excavation and earth work shall be measured & paid separately under appropriate item of this Schedule/BOQ.) |
| 18 | Material and Labour for cutting existing CI/DI pipe of 80 mm bore and removing the required length of pipe in position for insertion of new CI specials such as tees, reducers, tail pieces, collars, sluice valves, air release valves and other connected fittings, including cutting, dressing of cut ends, alignment, jointing and making good disturbed surfaces complete all as specified and as directed by the Engineer-in-Charge. |
| 19 | Material and Labour for cutting existing CI/DI pipe of 100 mm bore and removing the required length of pipe in position for insertion of new CI specials such as tees, reducers, tail pieces, collars, sluice valves, air release valves and other connected fittings, including cutting, dressing of cut ends, alignment, jointing and making good disturbed surfaces complete all as specified and as directed by the Engineer-in-Charge. |
| 20 | Material and Labour for cutting existing CI/DI pipe of 150 mm bore and removing the required length of pipe in position for insertion of new CI specials such as tees, reducers, tail pieces, collars, sluice valves, air release valves and other connected fittings, including cutting, dressing of cut ends, alignment, jointing and making good disturbed surfaces complete all as specified and as directed by the Engineer-in-Charge. |
| 21 | Material and Labour for cutting existing CI/DI pipe of 200 mm bore and removing the required length of pipe in position for insertion of new CI specials such as tees, reducers, tail pieces, collars, sluice valves, air release valves and other connected fittings, including cutting, dressing of cut ends, alignment, jointing and making good disturbed surfaces complete all as specified and as directed by the Engineer-in-Charge. |
| 22 | Supply and fixing in replacement CI special fitting suitable for 80mm to 300 mm bore pipe line, for reducing/bends (any type radius and angle) tapers any type, straight, bend, increasing decreasing or double socket extra Tee pieces single branch Y 'Junction' double branch cross collars cap etc IS marked, including taking out old fittings complete all as specified and as directed.Note : (i) Excavation and Earth work and Lead joints shall be measured and paid separately under respective item of BOQ |
| 23 | Supply and fixing in replacement cast iron sluice valve 80 mm nominal bore with flanged ends class PN 1.6 (ISI marked) confirming to IS:14846-2000, drilled type, steel spindle, CI gate with brass ring, iron wheel handle, suitable for CI/DI pipe line, complete including jointing material such as nuts, bolts, washers and rubber sheet insertion 3.0mm thick at both ends etc including taking out old sluice valve complete all as specified and as directed. |
| 24 | Supply and fixing in replacement cast iron sluice valve 100 mm nominal bore with flanged ends class PN 1.6 (ISI marked) confirming to IS:14846-2000, drilled type, steel spindle, CI gate with brass ring, iron wheel handle, suitable for CI/DI pipe line, complete including jointing material such as nuts, bolts, washers and rubber sheet insertion 3.0mm thick at both ends etc including taking out old sluice valve complete all as specified and as directed. |
| 25 | Supply and fixing in replacement cast iron sluice valve 150 mm nominal bore with flanged ends class PN 1.6 (ISI marked) confirming to IS:14846-2000, drilled type, steel spindle, CI gate with brass ring, iron wheel handle, suitable for CI/DI pipe line, complete including jointing material such as nuts, bolts, washers and rubber sheet insertion 3.0mm thick at both ends etc including taking out old sluice valve complete all as specified and as directed. |
| 26 | Supply and fixing in replacement cast iron sluice valve 200 mm nominal bore with flanged ends class PN 1.6 (ISI marked) confirming to IS:14846-2000, drilled type, steel spindle, CI gate with brass ring, iron wheel handle, suitable for CI/DI pipe line, complete including jointing material such as nuts, bolts, washers and rubber sheet insertion 3.0mm thick at both ends etc including taking out old sluice valve complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 27 | Supply and fixing in replacement cast iron sluice valve 200 mm nominal bore with flanged ends class PN 1.6 (ISI marked) confirming to IS:14846-2000, drilled type, steel spindle, CI gate with brass ring, iron wheel handle, suitable for CI/DI pipe line, complete including jointing material such as nuts, bolts, washers and rubber sheet insertion 3.0mm thick at both ends etc including taking out old sluice valve complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender