Tender For special Repair To Internal Road Of Rane Enclave And Provision Of Connecting Road From Adm Block To Otm Accn Under Ge Jhansi
Tender Value
70.80 Lakhs
Estimated cost
Bid Submission
22 Aug 2026
27 days left
EMD
1.32 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Internal Road Of Rane Enclave And Provision Of Connecting Road From Adm Block To Otm Accn Under Ge Jhansi
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) means over areas in any type of soil (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan area) including getting out as directed. |
| 2 | Removing excavated soil to a distance exceeding 250m & not exceeding 500m and depositing where directed, complete all as specified & directed. |
| 3 | M and L rolling and consolidating formation surface in cutting with 8 to 10 tonne power road roller including filling in, hollows and depression which occur during the process of rolling complete all as specified & directed. |
| 4 | M&L for 150mm thick (spread thickness) soling with broken stone aggregate or quarried stone of 40-63 mm size, inter stices filled, including surface formation, rolling & consolidation with 8 to10 tonne power road roller to required gradient & camber complete all as specified & directed. |
| 5 | M&L for 150mm thick (compacted thickness) water bound macadam (WBM) laid in two seperate layer (each layer of 75mm compacted thickness) with crushed stone coarse aggregates (trap or basalt) of grading 2 (63 to 40mm size) for 1st layer and of grading 3 (50 to 20 mm size) for second layer, (surfaces of each layer will be blinded with screening materials and moorum, watered consolidated and compacted separately), spread rolled and consolidated to required gradient and camber using with 8 to 10 tonne power road roller complete all as specified & directed. |
| 6 | M&L for preparing surfaces (unsurfaced water bound macadam) by brushing with steel wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags or mechanical air compressor machine to remove all loose dirt & applying evenly a priming / tack coat with paving bituminous primer (VG-10) @ 10 Kg per 10 Sqm complete all as specified & directed. |
| 7 | M&L for laying premix bituminous macadam (consolidated thickness 75mm or less) with paving bitumen VG-30 @ binder content of 4% by weight of total mix (design mix), prepared in hot mix plaint, laid/rolled and compacted to required gradient and camber with 08 to 12 tonne power roller and vibratory roller etc complete all as specified and directed. |
| 8 | M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags or mechanical air compressor machine to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sqm using paving bitumen VG-10 complete all as specified and directed. |
| 9 | M&L for providing bituminous premixed asphaltic semi dense concrete (design mix) 40mm consolidated thickness using paving bitumen VG-30 @ 5.5% binder content by weight of total mix, laid/spread uniformly by means of mechanical pavers over primed black top surfaces rolled and compacted to required camber and gradient using 10 to 12 tonne power roller, complete all as specified and directed complete all as specified and as directed. |
| 10 | M&L for providing bituminous premixed asphaltic semi dense concrete (design mix) 30mm consolidated thickness using paving bitumen VG-30 @ 5.5% binder content by weight of total mix, laid/spread uniformly by means of mechanical pavers over primed black top surfaces rolled and compacted to required camber and gradient using 10 to 12 tonne power roller, complete all as specified and directed complete all as specified and as directed. |
| 11 | M & L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening / weap hole to drain rain water wherever required complete all as specified and as directed. |
| 12 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick center or edge line, stop lines, dashes, arrows, etc and the like n exc 10 cm wide hot applied thermo plastic road marking paint (reflective type ) of uniform finishing with machine conforming to BS 3262 (Part-I) 1989 read with most specification of 803 clause 4.2.1 and 4.2.2 on bituminous surface in white / yellow/ red colour and super imposed with glass slam beats conforming to BS 6088 and most specification 803 clause 4.3.3 including cleaning of surface by removing all dust dirt oil grease etc including removing of existing marking with spirit / kerosene / gas burner or mechanically on bituminous surface complete all as specified and directed. |
| 13 | Surface excavation n. exc. 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil and removing earth upto 50m from site complete all as specified and directed. |
| 14 | M&L for 100mm thick (spread thickness) moorum/red bajri brought from out side MD land, filling in layers not exceeding 10cm thick, spread watered , rolled and consolidated with 8 to 12 tonne power roller to required camber and gradient, complete all as specified and directed. |
| 15 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed. |
| 16 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed. |
| 17 | S&F road safety convex mirror 800 mm dia or over , SS supporting pipe, PVC canopy at top of mirror to prevent the mirror from rain water shower etc. including fixing and anchoring with PCC 1:2:4 grout complete all as specified and directed. Make- Oscar, Pioneer, Shakti or Equivalent |
| 18 | Manufacturing, supplying and fixing retro reflective Cautionary / warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message , symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. |
| 19 | Repair to pot holes any depth, not exc 1.0 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads , paths etc. cutting around edges to at least 25mm in depth making good by applying tack coat @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm blinded with 0.09 cum of stone, chippings, 6.3 mm size and again rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender