Tender For Repair/Maint Of All Types Of Fans (Ceiling Fans, Exhaust Fans) & Geysers And Misc Internal E/M Services At Anand Parbat Mil Stn Under Ge (North) Delhi Cantt-10
Tender Value
27.28 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
17 days left
EMD
54600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of All Types Of Fans (Ceiling Fans, Exhaust Fans) & Geysers And Misc Internal E/M Services At Anand Parbat Mil Stn Under Ge (North) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down ceiling fan of any sweep by unscrewing nut/bolts from its position and fixing the same to its original place after necessary cleaning, oiling, greasing, replacement of defective parts bush, bearing, condenser,flexible connection wire,down rods, canopies,minor spares,painting and re-winding all as specified and directed. Note : Rubber Bush, Gun Metal Bush, bearing,capacitor, twin core twisted copper flexible wire, down rods, canopies, winding and paintng are measured and paid separately as supply only rates and fixing charges for spare parts shall deemed to be included) |
| 2 | Rewinding of burnt winding from the stater of the ceiling fan any sweep with matching gauge and turns of super enamelled copper wire leathenic paper, glass sleeves etc including varnishing,heating the windings as per manufacturer design and reassembling the same complete testing all as specified and as directed. |
| 3 | Painting of ceiling fan with set of blades of any sweep complete with one coat of 1st grade quality synthetic enamel paint by spraying including preparation of old painted surfaces to remove any type of sticky dust, oil marks etc and filling cavities with fillers and writing letters and numbers complete all as specified and as directed. |
| 4 | Taking down Exhaust/Ventilation fan of any sweep by unscrewing nut/bolts from its position (high rise bldgs up to 8 storey height) and fixing the same to its original place after necessary cleaning, oiling, greasing, replacement of defective parts bush, bearing, condenser,flexible connection wire,louvers,shutters,painting,minor spares and re-winding all as specified and directed.Note : Rubber Bush, Gun Metal Bush, bearing,capacitor, ventilation fan motors,twin core twisted copper flexible wire, Louvers,shutters, winding and paintng are measured and paid separately as supply only rates and fixing charges for spare parts shall deemed to be included) |
| 5 | Rewinding of burnt winding of the Exhaust fan any type up to 300 mm dia with matching gauge and turns of superenamelled copper wire leathenic paper, glass sleeves etc including varnishing,heating the windings as per manufacturer design and reassembling the same complete testing all as specified and as directed. |
| 6 | All as per the description of srl item No 05 above item but 380/450mm Sweep. |
| 7 | Painting of exhaust fan of any sweep complete with one coat of 1st grade quality synthetic enamel paint by spraying including preparation of old painted surfaces to remove any type of sticky dust, oil marks etc and filling cavities with fillers and writing letters and numbers complete all as specified and as directed. |
| 8 | Taking down pedestal/wall mounted fan of any sweep by unscrewing nut/bolts from its position and fixing the same to its original place after necessary cleaning, oiling, greasing, replacement of defective parts bush, bearing, condenser,if any spares,flexible connection wire and re-winding all as specified and directed.Note : Bush, bearing,capacitor, twin core twisted copper flexible wire and winding are measured and paid separately as supply only rates and fixing charges for spare parts shall deemed to be included) |
| 9 | Rewinding of burnt winding from the stater of the pedestal/wall mounted fan any sweep with matching gauge and turns of superenamelled copper wire leathenic paper, glass sleeves etc including varnishing,heating the windings as per manufacturer design and reassembling the same complete testing all as specified and as directed. |
| 10 | Supply only for ball bearing number of 6201 to 6204 as required. (Make : SKF/NBC). |
| 11 | Supply only for rubber bush for shackle with bolt, nut and lock pin suitable for ceiling fan . |
| 12 | Supply only for PVC holder for condenser housing. |
| 13 | Supply only for twin twisted copper flexible wire size of up to 1 sqmm. |
| 14 | Supply only capacitor 0.8/1 Mfd, 240 Volts.(Make/Model- as per sample) |
| 15 | Supply only capacitor 2.5&3.5 Mfd, 240 Volts.(Make- Tibcon/Havells/Epico) |
| 16 | Supply only PVC canopy for ceiling fan |
| 17 | Supply only down rod for ceiling fan 1' llength, down rod colour match with exist fan to any height complete all as directed. |
| 18 | All as per the description of srl item No 17 but 2' length. |
| 19 | Supply only for ventilation fan motors suitable for 200/250mm sweep complete. |
| 20 | M&L for 50x6mm thickness MS strip/clamp with nut,bolt and washers suitable for fixing of ceiling fan and all as specified and directed. |
| 21 | M&L in repair for GI tubing 40 mm bore (medium grade) for fixing of ceiling fans and make good the disturbed wall surface and all as specified and directed. |
| 22 | M&L for ceiling fan blade suitable for 1200mm sweep for complete. |
| 23 | All as per the description of srl item No 22 but 1400 mm sweep. |
| 24 | S&F in replacement louvers with shutter metallic body suitable for single phase 240 Volts AC heavy duty exhaust fan upto 450 mm sweep with necessary fixing accessories after taking down existing all as specified and directed. Note: Louver Shutter are to be replaced up to high rise bldgs 8 storey including all necessary T&P and fixing accessories etc. |
| 25 | S&F in replacement louvers with shutter plastic body suitable for single phase 240 Volts ventilation fan 200 mm sweep with necessary fixing accessories after taking down existing all as specified and directed. Note: Louver Shutter are to be replaced up to high rise bldgs upto 8 storey, including all necessary T&P and fixing accessories etc. |
| 26 | M&L for exhaust fan blade (metal body) suitable for 300/380/450mm sweep for exhaust fan complete all as directed. |
| 27 | M&L for ventilation fan blade (PVC type) suitable for 200mm sweep complete all as directed. (Make as per sample) |
| 28 | M&L for wall/stand fan blade (PVC type) suitable for 300mm sweep complete all as directed. |
| 29 | Taking down carefully electric geyser of any type and capacity by disconnecting electric and water supply connection, opening nut, bolt, washer and replacing the defective parts. descaling with acid washing and reassembling after cleaning and replacing defective parts and re-installing the same in original position with fastner nut and bolts and making necessary electric and water supply connection and testing complete all as specified and directed. Note: Spare items shall be measured and paid seperately as supply only under relevant items) |
| 30 | Supply only geyser inner water tank 25 Ltrs capacity steel body with nut and bolts as per sample ,duly tested complete all as specified and directed |
| 31 | Supply only of Heating element capacity 1.5/2KW (Round/Triangular) ISI marked suitable for geyser (as per sample) complete all as specified and directed. |
| 32 | Supply only thermostat suitable for 25 ltrs capacity geysers as per sample. |
| 33 | Supply only Heavy duty hot water connection, SS rope threaded type with brass unions, neoprene washers at both ends, 45/60cm long 15mm bore complete. |
| 34 | Supply only cold water connection, PVC connection with brass unions,neoprene washers at both ends, 45/60cm long 15mm bore complete. |
| 35 | Supply only replacement of safety valve/Pressure release valve for geysers of any type/capacity. |
| 36 | Supply only indicator lamp Red/Green suitable for geyser geysers of any type/capacity. |
| 37 | Supply only geyser base plate/apparatus assembly of any capacity any model all as specified and directed complete. |
| 38 | Supply only geyser top and bottom cover any capacity any model all as specified and directed complete. |
| 39 | S&F in replacement of glass wool heat resistance thermal type/heavy duty puf insulation glass wool of exist type for 25 ltrs capacity geysers complete. |
| 40 | S&F in replacement of outer cover MS sheet/ABS body of geysers 25 Ltrs capacity complete all as specified and directed. |
| 41 | M&L soldering/brazing inner geyser tanks 25 liters capacity with brass solder and refixing after testing the leakage complete incl replacement of rubber packaging ring heat resistance type all as specified directed complete. |
| 42 | M&L in replacement of Plug top, 3 pin, 05 amps, 230 volt. |
| 43 | M&L in replacement of Plug top, 3 pin, 15 amps, 230 volt. |
| 44 | S&F in repair industrial type two pin and earth plug top assembly including MCB 20 Amps complete. |
| 45 | Supply and fixing in repair of desert/Air cooler of body size 25\\"x25\\"x32\\", made out of corrosion resistant, 18 SWG GI sheet duly powder coated paint with 500mm sweep copper wound fan motor kit 180 watt with metallic blade, ISI marked, 1400 RPM, 230 volt AC, tank capacity not less than 100 ltr, incl plastic submersible pumps, electronis fan regulator with P/switch, desert cooler to be fitted with 6mm thick plywood to cover the gap as required size at existing window and old unsv desert cooler depositing in E/M Store yard complete all as directed (Make : JK Classic/Decool/Supreme/Kapsun) |
| 46 | S&F in replacement fan motor kit incl blade, steel body for desert cooler of flow capacity upto 4000 Cum/Hr complete all as directed (Make :- Khaitan/CG/Bajaj) |
| 47 | M&L fan blade suitable for desert cooler up to 450mm sweep fan complete all as directed |
| 48 | Supply and fixing 6mm thick plywood sheet (ISI marked) waterproof fixed in window including cutting as desired size for passing air of desert cooler. |
| 49 | S&F desert cooler pad (set of three) made out of wood wool etc suitable for desert cooler of any size. |
| 50 | S&F in replacement desert coolers body of required size made out of 18 SWG MS sheet complete including inside panel made out of 22 SWG MS sheet complete and grill duly painted with two coat synthetic enameled paint over one coat of red oxide inside complete all as directed. (Make Berger/ Asian paint/ Nerolac) |
| 51 | Supply and fixing in repair of High speed ceiling fan (BLDC) in white colour 1200mm sweep star rating 220-240 volt with one set of 3 blades, down rod, hanger clamp PVC conopy complete and UNSV ceiling fan depositing in E/M store yard. (Make Havells/ Crompton/ Bajaj/ Polycab ) |
| 52 | Supply and fixing in repair of 300mm dia, 900 RPM, exhaust fan, heavy duty with louver shutter, frame, blades complete and unsv Ex fan depositing in E/M store yard all as directed (Make: Khaitan/Crompton Greaves/Havells) |
| 53 | All as per the description of srl item No 52 but 380mm sweep (Make: Khaitan/Crompton Greaves/Havells) |
| 54 | All as per the description of srl item No 52 but 450mm sweep (Make: Khaitan/Crompton Greaves/Havells) |
| 55 | Supply and fixing in repair of 400mm sweep, wall mounting fan, oscalating type complete and UNSV fan deposit in E/M store yard complete all as directed (Make: Khaitan/Crompton Greaves/Havells) |
| 56 | Supply and fixing in repair of 200/225/250mm dia, 900 RPM, fresh air fan wIth plastic louvers incl frame complete all as directed (Make: Bajaj/Crompton Greaves/Havells) |
| 57 | Supply and fixing of new Geyser 25 Ltr capacity star rated, 230V, AC in wall with suitable size nut bolts and washers complete, taking down carefully of existing u/s geyser after disconnecting the electric connections and unsv Geyser depositing in E/M store yard all as specified and directed by Engr-In-Charge. Make- Havells/Crompton/Recold |
| 58 | Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and 1.5 ton of capacity and old UNSV AC's deposit in E/M store yard complete all as directed. (Make: llyod, LG, Voltas, Carrier, Hitachi) |
| 59 | Supply and fix refrigerator, electric driven (single phase), capacity 310 L or near by BEE 5 star rated and old unsv refrigerator deposit to MES store yard all as directed |
| 60 | Supply and fix water cooler electric driven (single phase), having approx storage capacity of 60 litre and nominal cooling capacity of 80 Litres per hour. and old unsv water cooler deposit to MES store yard all as directed |
| 61 | Supply and fix refrigerator, electric driven (single phase), capacity 310 L or near by BEE 5 star rated and old unsv refrigerator deposit to MES store yard all as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender