Tender For Petty Repair & Day To Day Maintenance And Misc B/R Work At Cgdhq-15 Okha Under Ge(I) Cg Porbandar.
Tender Value
15 Lakhs
Estimated cost
Bid Submission
14 Aug 2026
18 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Petty Repair & Day To Day Maintenance And Misc B/R Work At Cgdhq-15 Okha Under Ge(I) Cg Porbandar.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' B/R |
| 2 | Taking down Chowkhats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed by Engr-in-charge. |
| 3 | Taking down Chowkhats or frames exceeding 1.5 sqm but not exceeding 4.0 sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed by Engr-in-charge. |
| 4 | Taking down Shutters of any description exceeding 1.0 sqm and not exceeding 2.0 sqm each, complete all as specified and directed by Engr-in-charge. |
| 5 | Supply & Fixing 2nd class Hardwood Plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engr-in-charge. |
| 6 | Supply & Fixing 2nd class Hardwood 30mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: fixed to chowkhats, complete all as specified and directed by Engr-in-charge. |
| 7 | Supply & Fixing 2nd class Hardwood 30mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and directed by Engr-in-charge. |
| 8 | Supply & Fixing Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels, with decorative face veneer on both sides with lipping/frame to match, complete all as specified and directed by Engr-in-charge. |
| 9 | Supply & Fixing Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 with size of hinges 125mm, complete all as specified and directed by Engr-in-charge. |
| 10 | Supply & Fixing Aluminium anodised, barrel tower bolts 200mm long of extruded section, complete all as specified and directed by Engr-in-charge. |
| 11 | Supply & Fixing extruded aluminium alloy handle of size 150mm fabricated type anodised complete, all as specified |
| 12 | Supply & Fixing alumunium alloy anodised sliding door bolt of length 250mm, with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding boltsof extruded section or cast aluminium alloy and fixed complete all as specified |
| 13 | Supply & Fixing Floor door stopper of aluminium alloy body and tongue, anodised, with overall length of cover plate as 150mm size with hard drawn steel spring, fixed in floor, complete all as specified and directed by Engr-in-charge. |
| 14 | Supply & Fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed by Engr-in-charge. |
| 15 | Material & Labour for preparation of new or previously untreated wood or wood based surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint etc., complete all as specified and directed by Engr-in-charge. |
| 16 | Supply & Fixing Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification, complete all as specified and directed by Engr-in-charge. |
| 17 | Supply & Fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification, complete all as specified and directed by Engr-in-charge. |
| 18 | Supply & Fixing extruded aluminium alloy handle of size 150mm fabricated type anodised, complete all as specified and directed by Engr-in-charge. |
| 19 | Supply & Fixing Aluminium anodised, barrel tower bolts 100mm long of extruded section, complete all as specified and directed by Engr-in-charge. |
| 20 | Supply & Fixing Butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 with size of hinges 100mm, complete all as specified and directed by Engr-in-charge. |
| 21 | Supply & Fixing Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg and fixed, complete all as specified and directed by Engr-in-charge. |
| 22 | Supply & Fixing Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed by Engr-in-charge. |
| 23 | Supply & Fixing MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed by Engr-in-charge. |
| 24 | Supply & Fixing Aluminium handles, 100mm size cast type, anodised, complete all as specified and directed by Engr-in-charge. |
| 25 | Supply & Fixing Aluminium handles 150mm size, cast type, anodised, complete all as specified and directed by Engr-in-charge. |
| 26 | Supply & Fixing Floor door stopper of aluminium alloy body and tongue, anodised, 150mm size with hard drawn steel spring, fixed in floor, complete all as specified and directed by Engr-in-charge. |
| 27 | Supply & Fixing Aluminium anodised Hasp & Staple, 100mm size, with hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed by Engr-in-charge. |
| 28 | Supply & Fixing in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed by Engr-in-charge. |
| 29 | Supply & Fixing in repair Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed by Engr-in-charge. |
| 30 | Supply & Fixing Pre-laminated particle board, interior grade,18-19 mm thick pre-laminated one side with decorative choice lamination & other side balancing white lamination, complete all as specified and directed by Engr-in-charge. |
| 31 | Supply & Fixing continuous (piano) hinges, mild steel, bright finish or electro-galvanised of flaps size 30mm (when open), complete all as specified and directed by Engr-in-charge. |
| 32 | Supply and fixing in replacement stainless steel chromium plated pipe 25mm dia, wall thickness of pipe not less than 20 gauge, as curtain rod fixing with and including fancy type brackets and decorated end knobs (finials), stop roller etc, fixed on wall for doors and windows curtains, cuttings as required length and fixing at site including fixing arrangements, rawl plug, screws etc. including taking out old any type rod or pelmet boxes with curtain rod, complete all as specified and directed by Engr-in-charge. |
| 33 | Supply and fixing in repair Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with section weighting 0.98 kg/rm with one or more rebates including joining cleat for fixing etc., complete all as specified and directed by Engr-in-Charge. |
| 34 | Supply and fixing in repair Powder coated (coating not less than 50 micron of any colour) aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc., complete all as specified and directed by Engr-in-Charge. |
| 35 | Supply & Fixing in repair Powder coated (coating not less than 50 micron of any colour) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). Hinges type B-21, 100mm long (2 no.) suitable handle (1 no.), complete all as specified and directed by Engr-in-Charge. |
| 36 | Supply & Fixing Solar control film 25 micron reflective type (gareware sun control or equivalent), complete all as specified and directed by Engr-in-Charge. |
| 37 | Supply & Fixing Sheet glass 4mm thick, ordinary quality and glazing with clips in square exc 0.5 sqm in each pane, complete all as specified and directed by Engr-in-Charge. |
| 38 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing tiles and rubbish off the premises, complete all as specified and directed by Engr-in-charge. |
| 39 | Material & Labour for Non-skid Ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bedding in Cement Mortar (1:6), complete all as specified and directed by Engr-in-charge. |
| 40 | Material & Labour for Vitrified ceramic coloured tiles with light shade 10mm thick Square or Rectangular polished area of each tiles not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bedding in cement mortar 1:6, complete all as specified and directed by Engr-in-charge. |
| 41 | Material & Labour for Vitrified ceramic coloured tiles with light shade 10mm thick Square or Rectangular polished area of each tiles not exceeding 1.00 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bedding in cement mortar 1:6, complete all as specified and directed by Engr-in-charge. |
| 42 | Material & Labour for Glazed ceramic tiles in vertical surface 350 x 250 x 7mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in Cement Mortar 1:4 such as skirting dados and riser to step etc., set jointed in neat cement slurry and pointed in white cement to match, complete all as specified and directed by Engr-in-charge. |
| 43 | Taking down steel tubing and connections 15mm bore including cleaning for re-fixing or removal from site, complete all as specified and directed by Engr-in-charge. |
| 44 | Taking down steel tubing and connections 20mm bore including cleaning for re-fixing or removal form site, complete all as specified and directed by Engr-in-charge. |
| 45 | Supplying and laying of 15mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and directed by Engr-in-charge. |
| 46 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and directed by Engr-in-charge. |
| 47 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position of capacity exc., 250 ltr but not exc. 500 ltr. (Cleaning repairing, etc. measured separately), complete all as specified and directed by Engr-in-charge. |
| 48 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position of capacity exc. 500 ltr but not exc. 1000 ltr. (Cleaning repairing, etc. measured separately), complete all as specified and directed by Engr-in-charge. |
| 49 | Supply & Fixing Rotational moulded polyethylene water storage tanks of capacity 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank complete all as specified in SSR Pt - I, complete all as specified and directed by Engr-in-charge. |
| 50 | Supply & Fixing Rotational moulded polyethylene water storage tanks of capacity 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank complete all as specified in SSR Pt - I, complete all as specified and directed by Engr-in-charge. |
| 51 | Supply & Fixing in repairs 15mm bore CP bib tap fancy type of screwed, for pipes, complete all as specified and directed by Engr-in-charge. |
| 52 | Supply & Fixing in repairs 15mm bore CP pillar tap fancy type of screwed, for pipes, complete all as specified and directed by Engr-in-charge. |
| 53 | Supply & Fixing in repairs 15mm bore CP Stop valves/angle valve, fancy type chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed in position, complete all as specified and directed by Engr-in-charge. |
| 54 | Supply & Fixing in repairs 20mm dia ball valves high pressure of PTMT epoxy coated aluminium rod & high density plastic ball, complete all as specified and directed by Engr-in-charge. |
| 55 | Supply & Fixing in repair water tank cover hinge type/ thread type colour black or white for size 500 ltr capacity of tank, complete all as specified and directed by Engr-in-charge. |
| 56 | Supply & Fixing in repair water tank cover hinge type/ thread type colour black or white for size 1000 ltr and above capacity of tank, complete all as specified and directed by Engr-in-charge. |
| 57 | Supply & Fixing in repairs PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed by Engr-in-charge. |
| 58 | Supply & Fixing in repairs vitreous china wash down water closet pan (pedestal pattern) white, complete all as specified and directed by Engr-in-charge. |
| 59 | Supply & Fixing in repairs vitreous china squatting pan, Orissa pattern size 580mm x 440mm white, with integral foot rests, complete all as specified and directed by Engr-in-charge. |
| 60 | Supply & Fixing in repairs 15mm bore brass chromium plated shower rose 125mm size with swivel joints, complete all as specified and directed by Engr-in-charge. |
| 61 | Supply & Fixing in repairs 10 ltrs capacity PVC valve less, symphonic action type flushing cistern, low level, and white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engr-in-charge. |
| 62 | Supply & Fixing in repairs Vitreous china wash basin of size 550mm x 400mm, white, flat back, complete all as specified and directed by Engr-in-charge. |
| 63 | Supply & Fixing in repair Plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed by Engr-in-charge. |
| 64 | Supply & Fixing in repair tubular towel rail, 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed by Engr-in-charge. |
| 65 | Supply & Fixing in repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed by Engr-in-charge. |
| 66 | Supply & Fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed by Engr-in-charge. |
| 67 | Taking down broken/uneven concrete from member and making necessary cleaning and applying a coat of anti-rust/anti corrosion paint over steel bars and also if any rusted stirrups/bars found then removing the same and using a new rebar of same dia and apply a ready to use non shrink cementious free flow micro-concrete (<100mm) using product SIKA REP MICRO-CONCRETE 4 + adequate Coarse aggregates. Yield approx 17 ltr/bag 30 kg over prepared surface as manufacture instructions, complete all as specified and directed by Engr-in-charge. Note: - Rated quoted to be inclusive of all material, tools and necessary formwork. |
| 68 | Taking down rolling shutter of size not exceeding 10 Sqm, Material and labour for straightening of certain members, guide channels, making good edges, repairing of hood cover, oiling, greasing to shaft/gear box to make it functional smooth including repairing by necessary welding and reviting/replacement of defective parts as required like steel spring/shaft/lock plate/curtain inter locking curl etc., after repair/replacement of parts as satisfaction of Engineer-in-charge re-fixing the shutter in original position including necessary PCC, brick work, plastering, painting, distempering etc., to matching the surface with existing surface, complete all as specified and as directed by Engineer-in-charge.Note : - (i) Spare parts as per requirement shall be measured and paid separately under appropriate item of BOQ as supply only, Cost of labour for replacing the parts shall be included in the unit rate. |
| 69 | Taking down rolling shutter of size exceeding 10 Sqm and not exceeding 25 Sqm, Material and labour for straightening of certain members, guide channels, making good edges, repairing of hood cover, oiling, greasing to shaft/gear box to make it functional smooth including repairing by necessary welding and reviting/replacement of defective parts as required like steel spring/shaft/lock plate/curtain inter locking curl etc, after repair/replacement of parts as satisfaction of Engineer-in-charge re-fixing the shutter in original position including necessary PCC, brick work, plastering, painting, distempering etc., to matching the surface with existing surface, complete all as specified and as directed by Engineer-in-charge.Note : - (i) Spare parts as per requirement shall be measured and paid separately under appropriate item of BOQ as supply only, Cost of labour for replacing the parts shall be included in the unit rate. |
| 70 | Supply only steel springs of length 300 to 450mm (heavy duty) suitable for rolling shutters complete. |
| 71 | Taking down gear box and rod only oiling, greasing to shaft/gear box to make it functional smooth including repairing by necessary welding and reviting, straightening of rod, and after repair upto entire satisfaction of Engineer-in-charge re-fixing complete gear box as per original including necessary PCC, brick work, plastering, painting, distempering etc to matching the surface with existing surface, complete all as specified and as directed by Engineer-in-charge. |
| 72 | Supply and fixing in replacement MS bevelled gear box assembly with crank handle of standard quality etc. including all accessories for gear operated rolling shutters as per sample approved by GE including taking down old unserviceable gear box and including necessary PCC, brick work, plastering, painting, distempering etc., to matching the surface with existing surface, complete all as specified and as directed by Engineer-in-charge. |
| 73 | Supply only rolling pipe shaft made out of 40mm dia GI pipe medium grade made to shape suitable for existing rolling shutter complete all as specified in SSR Part-I (2009) para 10.23.6, complete all as specified and as directed by Engineer-in-charge. |
| 74 | Supply only curtain strip made out of cold rolled MS sheet 1mm thick made to shape as per existing or as directed, curtain inter locking curl at both edges, 75-80 mm width of strip including one coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified in SSR Part-I (2009) para 10.23.2, complete all as specified and as directed by Engineer-in-charge. |
| 75 | Supply only fabricated lock plate made out of mild steel sheet not less 3.15mm thick of any width and height, including sliding bolts with locking arrangements complete all as specified in SSR Part-I (2009) para 10.23.3, complete all as specified and as directed by Engineer-in-charge. |
| 76 | Supply and fixing Guide channel made out of 3.15 mm thick MS sheet, made to U shape 75mm depth & 25 mm width with three fixing cleats, hooks/hold fast or pin complete all as specified in SSR Part-I (2009) para 10.23.4, complete all as specified and as directed by Engineer-in-charge. |
| 77 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engr-in-charge. |
| 78 | Supply & Fixing Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws, complete all as specified and directed by Engr-in-charge. |
| 79 | Supply & Fixing Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws, complete all as specified and directed by Engr-in-charge. |
| 80 | Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed by Engr-in-charge. |
| 81 | Supply & Fixing MS Rolled sections as in rafters / purlins where connected to common rafters etc., conforming to Fe-410(W) (Gde-E 250), complete all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender