Tender For Welcome Maintenance And Periodical Services With Repair To Buildings At Cgdhq-15 Okha Under Ge I Cg Porbandar.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
1 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance And Periodical Services With Repair To Buildings At Cgdhq-15 Okha Under Ge I Cg Porbandar.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-Aug-2026 |
| 2 | 21-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' B/R |
| 2 | Material & Labour for Preparing old plastered / decorated surface of wall including cornices etc., by brooming down and applying one coat of oil bound distemper including smooth roller finish, complete all as specified and directed by Engineer-in-Charge. |
| 3 | Material & Labour for Preparing old plastered / decorated surface of ceiling surfaces and applying one coat of oil bound distemper including smooth roller finish, complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material & Labour for complete removal of existing treatment by washing down and smoothing old wall surfaces including scrapping and applying two coats of oil bound distemper over a coat of primer as per manufacture instruction with smooth roller finish, complete all as specified and directed by Engineer-in-Charge. |
| 5 | Material & Labour for Preparing new plastered / decorated surface of ceiling surfaces and applying two coats of oil bound distemper including smooth roller finish, complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material & Labour for 3mm thick wall care putty in layers and making even and smooth of wall surfaces, complete all as specified and directed by Engineer-in-Charge. |
| 7 | Material & Labour for 3mm thick wall care putty in layers and making even and smooth on ceiling Surfaces, complete all as specified and directed by Engineer-in-Charge. |
| 8 | Material & Labour for preparation of old painted wood or wood based surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint etc., complete all as specified and directed by Engineer-in-Charge. |
| 9 | Material & Labour for preparation of old painted on steel based surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint etc., complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material & Labour for preparation of old plastered surfaces of wall and applying three coat of white wash, complete all as specified and directed by Engineer-in-Charge. |
| 11 | Material & Labour for preparation of old plastered surfaces and applying one coat of 100% Premium Acrylic emulsion paint having VOC 50gm/litre and UV resistance as per IS 15489 : 2004, Alkali and Fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with Silicon Additives @ 1.43 litre/10sqm, complete all as specified and directed by Engineer-in-Charge. |
| 12 | Material & Labour for preparation for applying two or more coats of 100% Premium Acrylic emulsion paint having VOC 50gm/litre and UV resistance as per IS 15489 : 2004, Alkali and Fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with Silicon Additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces, complete all as specified and directed by Engineer-in-Charge. |
| 13 | Material & Labour for preparation of old painted concrete surfaces of any description over 10 cm girth or width not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge. |
| 14 | Material & Labour for two coats of exterior emulsion paint on new/old plastered surfaces in approved camouflage pattern on watch towers of height upto 6mtr with suitable scaffolding and including scrapping old treatment, taking down deteriorated wall/RCC surface/ceiling plaster and plastering in Cement Mortar 1:3 to match the existing surface, complete all as specified and directed by Engineer-in-Charge.Make:- Asian paints (Brand-Apex)/Berger paint ( Brand- Walmasta)/nerolac paint (Suraksha-plus) |
| 15 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing tiles and rubbish off the premises, complete all as specified and directed by Engineer-in-Charge. |
| 16 | Material & Labour for Vitrified ceramic coloured tiles with light shade 10mm thick Square or Rectangular polished area of each tiles not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bedding in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge. |
| 17 | Material & Labour for Vitrified ceramic coloured tiles with light shade 10mm thick Square or Rectangular polished area of each tiles not exceeding 1.00 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bedding in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge. |
| 18 | Supply & Fixing Joint free coloured glazed ceramic tiles 350mm x 250mm x 7mm / 450mm x 350mm x 7mm / 450mm x 300mm x 7mm / 250mm x 375mm x 7mm thick on vertical surfaces including 10mm thick backing coat in Cement Mortar 1:4 such as skirting dados and riser to step etc., set jointed in neat cement slurry and pointed in white cement to match, complete all as specified and directed by Engineer-in-Charge. |
| 19 | Taking down cement plaster including raking out joints hacking for key and scrubbing down with water, complete all as specified and directed by Engineer-in-Charge. |
| 20 | Material & Labour for rendering 10mm thick in Cement Mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 21 | Material & Labour for rendering 5mm thick in Cement Mortar 1:3 on concrete surfaces on ceiling finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 22 | Material & Labour for rendering on fair faces of brick work or concrete surface of wall 15mm thick in Cement Mortar 1:6 and to be finished even and smooth with out using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 23 | Material & Labour for granules textured homogeneous wall finishing system including preparation of old surfaces consisting of a two component system of dry granules (25 Kg per Pack) made of 92% silica particles coated with fade resistant pigment, 100% acrylic polymer bonding agent (5 Kg per pack) with the applied thickness of the coating being between 0.8mm - 1.2mm to be applied on curved, smooth level plaster without key, as per manufacture directions, for usages to be applied and approved applicator of the manufacture as per the direction/ supervision of the Engineer -in-Charge, all complete, The above texture coating should confirm to surface spread of flame class one of BS 476 : Part 7 : 1971 and pull off strength of the coating to meet JISA 6909 on smooth surfaces including taking down old surfaces, complete all as specified and directed by Engineer-in-Charge.Make : Bakelite Hylam Limited or equivalent make approved by the GE |
| 24 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes of capacity exc 250 ltr but not exc 500 ltrs, complete all as specified and directed by Engineer-in-Charge. |
| 25 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes of capacity exc 500 ltr but not exc 1000 ltrs, complete all as specified and directed by Engineer-in-Charge. |
| 26 | Supply & Fixing in repairs 15mm bore CP bib tap fancy type of screwed, for pipes, complete all as specified and directed by Engineer-in-Charge. |
| 27 | Supply & Fixing in repairs 15mm bore CP pillar tap fancy type of screwed, for pipes, complete all as specified and directed by Engineer-in-Charge. |
| 28 | Supply & Fixing in repairs 15mm bore wall mixer for mixing hot & cold water of screwed, for pipes, complete all as specified and directed by Engineer-in-Charge. |
| 29 | Supply & Fixing in repairs 15mm bore CP Stop valves/angle valve, fancy type chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed in position, complete all as specified and directed by Engineer-in-Charge. |
| 30 | Supply & Fixing in repairs 20mm dia ball valves high pressure of PTMT epoxy coated aluminium rod & high density plastic ball, complete all as specified and directed by Engineer-in-Charge. |
| 31 | Supply & Fixing in repairs PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed by Engineer-in-Charge. |
| 32 | Supply & Fixing in repairs vitreous china wash down water closet pan (pedestal pattern) white, complete all as specified and directed by Engineer-in-Charge. |
| 33 | Supply & Fixing in repairs vitreous china squatting pan, Orissa pattern size 580mm x 440mm white, with integral foot rests, complete all as specified and directed by Engineer-in-Charge. |
| 34 | Supply & Fixing in repairs 15mm bore brass chromium plated shower rose 125mm size with swivel joints, complete all as specified and directed by Engineer-in-Charge. |
| 35 | Supply & Fixing in repairs 10 ltrs capacity PVC valve less, syphonic action type flushing cistern, low level, and white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engineer-in-Charge. |
| 36 | Supply & Fixing in repairs Vitreous china wash basin of size 550mm x 400mm, white, flat back, complete all as specified and directed by Engineer-in-Charge. |
| 37 | Supply & Fixing in repair Plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed by Engineer-in-Charge. |
| 38 | Supply & Fixing in repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed by Engineer-in-Charge. |
| 39 | Supply & Fixing sheet glass shelf 5.5mm thick and 120mm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed by Engineer-in-Charge. |
| 40 | Supply & Fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed by Engineer-in-Charge. |
| 41 | Supply and fixing in replacement One Piece (Single Unit EWC with flush tank) White colour of size 660mm x 350mm x 740mm with S trap of 300mm allong with duroplast slim soft close seat coverand all necessary fittings fixtures required, complete all as specified and directed by Engineer-in-Charge.Make Cera Cat part No S1013256 or any equivalent make mentioned in Appendix 'B'. |
| 42 | Supply and fixing in replacement of table top WHB of size 545mm x 395mm x 110mm in white colour and including all necessary adhesive /fixture required for fixing (Make :Cera Cat Pt No. S2020194 or equivalent) complete all as specified and as directed by Engr-in-Charge. |
| 43 | Supply and fixing in replacement stainless steel chromium plated pipe 25mm dia, wall thickness of pipe not less than 20 gauge, as curtain rod fixing with and including fancy type brackets and decorated end knobs (finials), stop roller etc, fixed on wall for doors and windows curtains, cuttings as required length and fixing at site including fixing arrangements, raw plug, screws etc. including taking out old any type rod or pelmet boxes with curtain rod, complete all as specified and directed by Engineer-in-Charge. |
| 44 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in any mortar, complete all as specified and directed by Engineer-in-Charge. |
| 45 | Material & Labour for 20mm thick Granite (of any type) in Flooring (table rubbed and polished) and including 20mm thick Screed Bed in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture pigments to match the shade of granite, complete all as specified and directed by Engineer-in-Charge. |
| 46 | Material & Labour for 20mm thick Granite (of any type) For Wall /dado & skirting of riser of step (table rubbed and polished) including 15mm thick rendering in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture pigments to match the shade of granite, complete all as specified and directed by Engineer-in-Charge. |
| 47 | Supply & Fixing in repair Sinks made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed by Engineer-in-Charge. |
| 48 | Supply & Fixing in repair Sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 21, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 26, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender