Tender For Construction Of Audiometry Psychology And Counselling Room On The Ist Floor Of Ddrc Kandhamal Phulbani
Tender Value
11.51 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
12 days left
EMD
11600
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kandhamal → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Audiometry Psychology And Counselling Room On The Ist Floor Of Ddrc Kandhamal Phulbani
BOQ
| Sl. No. | Item Description |
| 1 | Fly Ash brick masonry in cement mortar 1:6 after immersing bricks for six hours in water before use in Superstructure with all necessary projections using Fly ash bricks of 10 inch size having a crushing strength of not less than 35 kg per Sq.cm including splays cutting circular moulding, chamfering, corbelling, watering and curing etc. complete including cost and conveyance of all materials and labour with T&P required for the work with and royalities etc. complete in all respect. |
| 2 | R.C.C. (M 20) using 20mm and 10mm size crusher broken Chips including cost, conveyance, royalty taxesof all materials, labour and T&P require for the work etc. complete with cost of centring & shutterign etc.a) Lintel |
| 3 | b) Chajja |
| 4 | Supplying and Straightening bent up or coiled rods, cutting, bending, crancking hooking welding or jointing (if required) the Tor Steel of SAIL/ RINL/ TATA/JINDAL/ SHYAM STEEL make with binding wires and binding tying the grills, hoisting, lowering & placing in proper position as required for all types of R.C.C. works including cost, conveyance of steel and binsding wire of of 18 to 20 gauge and labour with T & P required for the work etc. complete in all floors (weight of binding wires will not be considered for payment , and payment will be made on weight of Tor Steel Only. |
| 5 | Providing 16mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all height after racking out joints including watering and curing, rounding of corners providing grooves where ever necessary with cost, conveyance, royalties of all materials, with cost of all labour, T&P and scaffolding required for the work etc complete in all respect as directed by the Engineer |
| 6 | Providing 12mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all height after racking out joints including watering and curing, rounding of corners providing grooves where ever necessary with cost, conveyance, royalties of all materials, with cost of all labour, T&P and scaffolding required for the work etc complete in all respect as directed by the Engineer |
| 7 | Supplying of M.S. Grill/shutter of approved quality and design to windows and openings & stair case railing and parapet railings etc. including making holes in walls and RCC structures or wood work etc. in proper position making good the damages of walls or RCC or other structures complete including mending or cutting sizes or grooves in choukaths with cost and conveyance of all materials, labour with T&P required for the work and royalties etc. complete ( including screws) in all respect in all floors. Truss |
| 8 | Window grill |
| 9 | Supplying, fitting and fixing of Tata make / JSW colour tin sheet or equivalent, heat resistant , specially colour coated Sheet for roofing including cost, conveyance of all materials, labour and T&P require for the work etc. complete as directed by E.I.C. |
| 10 | Supplying, Fitting and Fixing Vitrified Tile (Coloured/ printed series) over 25kmm thick bed of cm (1:1) Flooring ( 600 mm x 600 mm) with cost of convency all materials, labour tiles etc complete as directed by E.I.C. |
| 11 | Supplying, fitting & fixing of Vitrified colour printed series tiles in dadoes, skirting and risers of steps of size 600mmx 600mm of approved make confirming to IS:13755 laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge |
| 12 | Supplying & fitting fixing of Un- plasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD) Casement Door-60 series dully manufactured using UPVC reinforced profile of 60mmx55mmx2.5mm for outer frames 102mmx60mmx2.25mm for cashment door sash profile and 74mmx60mmx2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0mm prefabricated and welded through fusion welding the door sash shall be fixed with 12mm thick WPC board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 no. per set of sashes & the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing /deglazing at site etc. including cost and conveyance of all materials, accessories,labour charges, materials and product and product conforming to ASTM D 638-14 EN-477-95 and Other applicable codes and standards as per direction of the Engineer-in-charge |
| 13 | Supplying & fitting fixing of Un- plasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD) Three Track -Three Panel sliding Window -60 series dully manufactured using UPVC reinforced profiles of 108mmx45mmx2.5mm for outer frames & Window sash of 39mmx58mmx2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated and welded through fusion welding the window sash shall be fixed with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant & the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing /deglazing at site etc. including cost and conveyance of all materials, accessories,labour charges, materials and product and product conforming to ASTM D 638-14 EN-477-95 and Other applicable codes and standards as per direction of the Engineer-in-charge |
| 14 | Supplying, Fitting and Fixing Armstong Ceilling including coat, conveyance, royalities, taxes of all materials, all labour T&P etc complete as per direction of Engineer -in- charge. |
| 15 | Finishing wall surface with Cement based Wall Putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scafflolding staging charges with cost of all materials taxes, labour T & P etc complete. |
| 16 | Wall painting Two Coat with P.E Paint over a coat of primer including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. |
| 17 | Painting 2 (Two) coats with any approved colour of weather coat over a coat of primer paint to out side surface of wall of approved shade and quality etc including all cost of primer and weather coat, conveyance, of all materials, all labour T&P etc complete as per direction of Engineer -in- charge. |
| 18 | Painting Two coats with any approved enamel paint ironwork including cost of enamel paint & primer sand papering polishing the surface with cost, Conveyance, of all materials and labour with T&P required for the work etc. complete in all respect as per direction of Engineer -in- charge. |
| 19 | Removing old tarfelt from roof including all labour with T&P required for the work etc. complete as per direction of Engineer -in- charge. |
| 20 | Providing and Fixing of Knauf Optra Acoustical Wall Panel with square edges made of fibre glass substrate 25mm thick, wrapped on the front side with an acoustically transparent fabric as per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell). The panelshall be classified for Fire Class A, as per ASTM E-84. The Acoustical Wall Panel shall be of sizes600x600mm (Nominal) or 600x1200mm (Nominal)and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient readings taken at 250 Hz. 500 Hz, 1000 Hz and 2000 Hz) with 50mm airgap as per ASTM C423 to be fixed to wall on a framework of wooden battensand using Wall panel Impalers (supplied by the manufacturer)or by using construction adhesives (as per the instructions laid down by the manufacturer). The fibre glass substrate shall have a recycle content of 85%. |
| 21 | Cement concrete of proportion (1:2:4) using 12mm size clean hard black crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm (6 inch) thick to the required level ramming, watering and curing etc. complete including cost and conveyance of all materials with and royalties and all labour with T&P required for the work etc. complete including dewatering if required. |
| 22 | EI WORKS:Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm2 FRLSH PVC insulated single core multistrand copper conductor of ISI marked (Finolex / Polcab/ KEI/Anchor) with 20 mm dia non-metalic PVC flexible conduit (Make- AKJ /KINJAL/ POLYCAB / ANCHOR) with 5/6 Amp, 250 V Modular switch ISI marked and ceiling rose ISI marked (Make Anchor -Roma Urban /Legrand myrius /Schneider opale/ Crabtree Athena/ L and T Engleze ) mounted an Modular G.I box with Modular baseand cover of suitable size (Make Anchor- Roma Urban / Legrand myrius/ Schneider opale / Crabtree Athena/ L and T Engleze) with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . as per direction of Engineer-in-charge.( Make of wire Finolex / L and T / Anchor / KEI/ Polycab / V- Guard ) Group-A. |
| 23 | Group- B. |
| 24 | Group- C. |
| 25 | Suply and fixing of 6 Amp 3 pin modular socket with 6 Amp modular switch on existing board.( Make Anchor Roma Urban / Legrand myrius / Schneider opale / crabtree Athena / L and T Engleze ). |
| 26 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 Amp modular socket outlet and 5/6 Amp modular switch, connections etc. as required. ( Make Anchor- Roma Urban / Legrand myrius / Schneider opale / crabtree Athena / L and T Engleze ) . |
| 27 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.) |
| 28 | Supply and fixing of 3 nos. of 3 pin 5/6 amp modular socket and S.P . 5/6 Amp one way modular switch, 1 no. of 5 pin 15/16 sockety outlet and S.P 15/16 A one way modular switch on modular G.I Box with modular base and cover . ( Make Anchor - Roma Urban / Legrand myrius / Schneider opale / Crabtree Athen/ L and T Engleze ) |
| 29 | Recessed wiring to submain in the following sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/ 1990 in the following mm dia non- metalic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. ( Make of wire Finolex / KEI/ Polycab / L and T / Anchor )a) 1x1.5mm2 in 20mm dia for Inverter wiring. |
| 30 | (b) 2x 1.5 mm2 + 1x 1.5 mm2 . in 20mm dia |
| 31 | (C) 2x 2.5 mm2 + 1x 1.5 mm2 . In 20 mm dia |
| 32 | (d) 2x 4 mm2 + 1x 1.5 mm2 in 20mm dia |
| 33 | (e) 2x 6 mm2 + 1x 2.5 mm2 in 32 mm dia |
| 34 | Supply and fixing of three pole and neutral. Sheet steel, MCB distribution , 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, inter connections, phosphatized and powder painted including earthing etc. as required ( But with out MCB/ RCCB / Isolator ) ( Make - L and T / Legrand / Schneider / ABB ) (a) 8 Way Double door |
| 35 | Supply and fixing of 5 Amp to 32 Amp rating 240V C series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required . ( Make - Legrand / L and T / Schneider) (a) 6 Amp rating to 32 Amp (SP) MCB |
| 36 | (b) 40 Amp (DP) MCB |
| 37 | Supply, installation of exhaust fan of heavy duty 300 mm sweep with louvers any other equivalent reputed make star rated as approved of exhaust fan in the existing wall, including fixing & connection as required as per direction of Engineer-in-Charge. ( Make -Havells/ Bajaj/ Usha/ Crompoton) |
| 38 | Supply, installation, testing and commssion of 1200 mm sweep BLDC ceiling fan with aluminium blades having wattage not more than 28W and Air Delivery greater or equal 215 (m3/Min) Make- Usha (Teohnix) / Cromton (Energion Groove) / Havells (Efficiencia Neo) including wiring the down rod of standard length (Up to 30 cm ) with 1.5 Sq mm PVC insulated, Copper conductor, single core cable etc. as required as per direction of engineer-i-charge, replacement warrenty will be 4 year. (With Fan regulator) |
| 39 | S/F of Bakelite angle holder/ batten holder of ISI marked conforming to IS-1258/ 1987 in place of ceiling rose (Make Anchor/ Cona). |
| 40 | S/F. of 9 Wt. LED bulb (Philips / Panasonic / Havels) make. |
| 41 | S/F. of 1x18Wt. LED tube light fiting (Philips / Panasonic / Havels) make. |
| 42 | Supplying and fixing of call bell / buzzer ISI marked suitable for DC / AC single phase 230 volts complete as require. (Make- Cona / Anchor) |
| 43 | S/F of MODULAR type Bell Push- Supplying and fixing of following MODULAR type Bell push on the existing switch box / cover including connections etc as required. |
| 44 | S/F of 90Wt. LED Street light fittings complete with G.I. Barcket (Philips / Panasonic / Havels) make. |
| 45 | PH WORKS:Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.1st Floor (i) 25mm dia C-PVC Pipe (Astral/Ashirvad/Finolex) |
| 46 | (ii) 32mm dia PVC ASTM pipe (sch-80) (Astral/Ashirvad/Finolex) |
| 47 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.15mm dia CP angle stop cock(FLR-ACR-5053N) (Jaquar Make) |
| 48 | 15mm dia CP two way bib cock(FLR-CHR-5041N) (Jaquar Make) |
| 49 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 50 | 25mm dia brass full way valve (Shakti make) |
| 51 | 32mm dia brass full way valve (Shakti make) |
| 52 | 15mm dia CP Health faucet ( Jaquar make ALD565/JohnsonS1001C/Hindware F160122) |
| 53 | 15mm CP Extension piece |
| 54 | 125mm CP grating |
| 55 | 15mm size C.P. flange |
| 56 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. |
| 57 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge |
| 58 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 59 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Astral/Ashrivad/Finolex Make Type-B) |
| 60 | 110mm U-PVC P Trap (Astral/Ashrivad/Finolex Make) |
| 61 | 110mm U-PVC door bend (Astral/Ashrivad/Finolex Make) |
| 62 | 110mm U-PVC Plain bend (Astral/Ashrivad/Finolex Make) |
| 63 | 110mm U-PVC offset without ear (Astral/Ashrivad/Finolex Make) |
| 64 | 110mm U-PVC Door tee (Astral/Ashrivad/Finolex Make) |
| 65 | 110mm U-PVC Socket (Astral/Ashrivad/Finolex Make) |
| 66 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Jaquar/Johnson/Hindware make ) |
| 67 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral p or s trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.European water closet with 'p' trap plain(Hindware/Parryware/Neycer make) |
| 68 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge. 550x400mm wH Basin with pedestall and pillar cock (Jaquar/ Hindware/ Johnson Make) 22 inch x 16 inch pedestal |
| 69 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. 25mmx600mm long CP towel rail (Jaquar/Johnson/Hindware make) |
| 70 | Towel ring( Jaquar) |
| 71 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. 600mmx125mm plate glass shelf with CP/NP guard rails. |
| 72 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.600mmx450mm size B.E mirror (swivelled type) |
| 73 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. CP soap holder |
| 74 | Supplying all materials, labour, T&P and providing and fixing Vetrified tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 60cmx60cm special printed series to be pre-approved by the Engineer-in-charge )(Somany/Johnson/Kajaria)Tile 60cm x60cm) First Floor |
| 75 | Supplying all materials, labour, T&P and providing and fixing Vetrified tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )Somany/Johnson/KajariaFirst Floor |
| 76 | Supplying & fitting fixing of unplasticised Poly vinly chloride (UPVC ) (FENESTA/ NCL/ VEKA LTD) Casement Door series dully manufactured using UPVC reinforced profile of 60mmx55mmx2.5mm for outer frame 102mmx60mmx2.5mm 2.13*0.75*85 |
| 77 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender