Tender For Construction Of D Type Staff Quarter Building Compound Wall At Govt Ayurvedic Dispensary Talmal Under Lakhnapur Block In The District Of Jharsuguda For The Year 2025-26
Tender Value
1.20 Crore
Estimated cost
Bid Submission
11 Aug 2026
12 days left
EMD
1.20 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jharsuguda → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of D Type Staff Quarter Building Compound Wall At Govt Ayurvedic Dispensary Talmal Under Lakhnapur Block In The District Of Jharsuguda For The Year 2025-26
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation in hard soil within initial lead and lift including rough dressing and breaking clods etc. complete. including dressing and levelling the bed not exceeding 1.50m depth and Depositing the Soil within initial lead of 50m & as per specification approved by the Department. |
| 2 | Providing filling foundation and plinth with sand well watered and rammed with all leads and lifts including cost , conveyance, royality of materials labour . T & P etc. complete as per direction of Er. In Charge. |
| 3 | Cement concrete (1:3:6) with 4cm size hard granite metal of approved quality and approved quarry in foundation including hoisting laying concrete with cost conveyance of materials including watering, curing, royality all T & P required for the work etc. complete as per direction of the Engineer-in-Charge. |
| 4 | Fly ash.Brick masonary in cement mortar ( 1:6 )using K.B.Bricks of size 10\\"x5\\"x3\\" having crushing strength between 100 Kg/Cm2 to 149 Kg/Cm2 after immersing the bricks for six hours in water before use in foundation plinth & basement and for ornamental flower beds plinth moulding and similar such type of works with all necessary projections flooring moulding corbelling, champhering watering and curing etc.including cost,conveyance,royalties and all taxes of all materials and cost of all labouir with T&P required for the work etc.complete in all respect as per direction of Engineer-in-Charge. |
| 5 | Fly ash.Brick masonary in cement mortar ( 1:6 )using K.B.Bricks of size 10\\"x5\\"x3\\" having crushing strength between 100 Kg/Cm2 to 149 Kg/Cm2 after immersing the bricks for six hours in water before use in superstructure with all necessary projections flooring moulding corbelling, champhering watering and curing etc.including cost,conveyance,royalties and all taxes of all materials and cost of all labouir with T&P required for the work etc.complete in all respect as per direction of Engineer-in-Charge. |
| 6 | Providing and laying R.C.C work in M-25 grade with 20mm and down grade black hard granite crusher broken stone chips of approved quality from quarry with smooth centering and shuttering hoisting and laying in layers including cost, conveyance, royalty and taxes of all materials, labour , T & P etc complete as per dircetion of the Engineer-in-Charge. Column base |
| 7 | Column Base |
| 8 | Plinth Band |
| 9 | Column |
| 10 | Lintel |
| 11 | Stair case |
| 12 | Chajja |
| 13 | Shelve |
| 14 | Wall Beam |
| 15 | Providing M.S reinforcement for R.C.C work including cutting bending binding & tying the grills & placing in position with cost of M.S rod and binding wire of etc complete as per direction by the Engineer-in-Charge. |
| 16 | 20mm thick cement plaster in cm (1:4) for Grading plaster with all cost conveyancy Royality etc complete as directed by the Engineer-in-Charge. |
| 17 | Supplying & Fixing of tiles in Floors of size 600x600 on 25mm thick bed (1:3) jointed with net cement slurry mixed with pigment to match the shade of of the tile including rubbing and polishing complete including cost of tiles etc complete as directed by the Engineer-in-Charge. |
| 18 | Supplying & Fixing of tiles in Dados of size 600x600 on 25mm thick bed (1:3) jointed with net cement slurry mixed with pigment to match the shade of of the tile including rubbing and polishing complete including cost of tiles etc complete as directed by the Engineer-in-Charge. |
| 19 | Cement Concrete 1:2:4 using 12 mm size BHG C.B chips including cost, conveyance, royalaties Taxes of al materials etc complete as per direction by the Engineer-in-Charge. |
| 20 | Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 sqm. (20mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-Charge. |
| 21 | Supplying, fitting & fixing of Chequred Tiles approved make in floors, treads or steps and landing on 25 mm thick bed of cement mortar 1:1 (1 cement: 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rub |
| 22 | Providing fitting, fixing of Al. door with anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top & bottom portion fixed on door frame by means of tapered clip No.4660, Rubber beading, friction stay and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P,hire charges of drilling machine, labour charges etc. complete as per direction of the Engineer-in-Charge. |
| 23 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 151-154,151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel with rubber beading including locking fitted etc. complete as per direction of the Engineer-in-Charge. |
| 24 | Providing , fitting & fixing of 30mm Flush door with single shutter made of with all fitting like door closer, door stopper, alluminium door hinges, friction stay, alluminium screews, handle with lock (Brass), with all labours & cost of all materials etc complete as per direction of the Engineer-in-Charge. |
| 25 | Providing with fitting and fixing in position of M.S. windows and door openings and stair case railings and parapet railing including making holes in walls and RCC structures or wood work etc. in proper position, making good to the damages of walls etc complete as per direction of the Engineer-in-Charge. |
| 26 | Labour for fitting and fixing expanded metal or wiremesh for windows etc including sal wood beading with cost of nails, screws beads etc completed but excluding cost of expanded metal or wire mesh etc complete as per direction of the Engineer-in-Charge. |
| 27 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD. Ventilator/ Top Hung- 60 Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mm x 2.5 mm for outer frames. 75 mm x 60 mm x 2.25mm etc complete as per direction of the Engineer-in-Charge. |
| 28 | Labour for fitting and fixing in position of M.S. Doors,windows and Grill for openings and stair case railings and parapet railing including making holes in walls and RCC structures or wood work etc. in proper position, making good to the damages of walls etc complete as per direction of the Engineer-in-Charge. |
| 29 | 12mm (½\\") thick cement plaster in cement mortar (1:6) finished smooth to external brick walls after racking out the joints of brick work with watering curing and cost conveyance, royality taxes of all materials all labour T&Petc complete as per direction of the Engineer-in-Charge. |
| 30 | 16mm (5/8\\") thick cement plaster (1:6) finished smooth to external brick wall surface after racking out joints including watering and curing with the cost and conveyance of all materials and labour with T&P required for the work with all taxes and royaltiy etc complete as per direction of the Engineer-in-Charge. |
| 31 | 12mm (½\\") thick cement plaster in cement mortar (1:4) finished smooth to external brick walls after racking out the joints of brick work with watering curing and cost conveyance, royality taxes of all materials all labour T&P etc complete as per direction of the Engineer-in-Charge. |
| 32 | Painting two coats with any approved paint to new wood work and iron work including cost of the paint sand papering polishing the surface with cost conveyance and taxes of all materials and labour with T&P required for the work etc complete as per direction of the Engineer-in-Charge. |
| 33 | Finishing wall with Weather coats of approved shade on new work two coats to give even shade including cost, conveyance, taxes with all labour and T&P required for the work etc. complete as per direction of the Engineer-in-Charge. |
| 34 | Priming one coat with any approved primer including cost of primer etc. complete as per direction of the Engineer-in-Charge. |
| 35 | Finishing wall surface of walls with Acrylic wall putty ( water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc. complete as per direction of the Engineer-in-Charge. |
| 36 | Distempering two coats with any approved shade including cost of all materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge. |
| 37 | Supplying ,fitting ,fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32x32x2mm @0.90 mtr. C/C and stainless square pipe bracing of size 32x32x2mm in 3 rows in stair case as per approved etc. complete as per specification and direction of the Engineer-in-Charge. |
| 38 | Supplying and laying of precast inter locking concrete block of 80mm thck of approved design and filling the joints with sand on the prepared surface including cost of all charges etc. complete as per the direction of Engineer-in-Charge. |
| 39 | EI works |
| 40 | Recessed wiring to light point/fan point/exhaust pont/call bell pont with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire - Polycab/Finolex/ L&T / Anchor / Havells / V Guard/ KEI/ Great White) Modular Type -do- (Gr.A) (1.1.1-1.24.2) |
| 41 | -do- (Gr.B) (1.1.2-1.24.2) |
| 42 | -do- (Gr.C) (1.1.3-1.24.2) |
| 43 | S/F of M.S. Box for 2 Module 18 swg |
| 44 | S/F of M.S. Box for 4 Module 18 swg |
| 45 | S/F of M.S. Box for 8 Module 18 swg |
| 46 | S/F of 3 pin 5/6 A.F.T switch and.Socket on existing board (Modular type) (1.25.1+1.25.4) |
| 47 | S/Fof 6 module M.S. Box with Bakelite cover (Modular Type) on surface or in recess including providing and fixing of 2 nos 3 pin 5/6 amp. Socket out let 5/6amp. Piano type modular switch,connection,painting etc. as required (1.24.4 +2 x (1.25.1+1.25.4) |
| 48 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required(1.24.2+1.25.5+1.25.5) |
| 49 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required(1.24.2+1.25.5+1.25.5) for inverter Connection |
| 50 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB and indicator complete with wiring on 12 modular M.S. box with modular cover. |
| 51 | S/F of A.C.Starter 20Amp with 2 module Box.(Make Havells/Equivalent) |
| 52 | S/F of 15A Socket on 2 module for AC |
| 53 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Polycab/Finolex/L&T/Anchor/Havels/V-Guard/KEI/Great White).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1) |
| 54 | -do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2) |
| 55 | -do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3) |
| 56 | -do- 2x6 sqmm + 1 x 2.5 sqmm (1.8.3) |
| 57 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 58 | S/F of 5 to 32 Amp rating 240 Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) |
| 59 | S/F of 32A rating \\"C\\" Series DP MCB (Make: L&T/Havells/C&S or Equivalent) |
| 60 | S/F of MCB 4 Way Double Door (2.3.5) |
| 61 | S/F of MCB 8 Way Double Door (2.3.6) |
| 62 | S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 ) |
| 63 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 64 | S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28) |
| 65 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2 +3.3) |
| 66 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 67 | S/F of Fan hook S, Type on ceiling. |
| 68 | S/F of step type modular fan regulator |
| 69 | Supply of instalation, Testing commissioning of 12 Watt. LED bulb |
| 70 | Supply, Installation, Testing and commissionioning of 300mm sweep exhaust fan in the existing opening, including making the hole to suit the size of the above fan making good the damaged comlete, connection,etc. as required.(1.43)(Make: usha/polycab/crompton/havells/anchor/orient) |
| 71 | S/F fo 1200mm A.C.Cilling fan(1 star) without regulator including all conections (Model: Usha (Striker NEO HS)/Polycab Vital HS/ Crompton (hs)/ havells samrat ES/Orient (Blitz)/ Anchor-Turbo Speed)/great white (Aldous) |
| 72 | S/F of 18-25W LED Tubelight fillting with all accessories and connection (Make : Crompton / HPL / Havells / Polycab / PAC |
| 73 | Supply & Fixing of 60 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 74 | Supply Fixing of 10 watt Bulk Head( (Make: Havels / Crompton ) |
| 75 | P.H works |
| 76 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. |
| 77 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C. |
| 78 | Supplying all materials labour T & P and fitting and fixingfactory made FRP door shutter and frame as per ISI mark including metal fittings such as tower bolts, aldrops, handles, butthinges etc. ls for fixing the frameand making it good including conveyance of all materials to work site payment of royality taxes etc. complete inall respect as per specification and direction of the E.I.C. Frame:- |
| 79 | Shutter:- |
| 80 | Supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C.250mm to 375mm |
| 81 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C. 110mm diameter U-PVC SWR pipes |
| 82 | 110mm U-PVC P-trap |
| 83 | 110mm dia PVC SWR Nahani trap without Jally |
| 84 | 110mm U-PVC SWR Double junction door |
| 85 | 110mm U-PVC SWR door bend |
| 86 | 110mm U-PVC SWR Offset |
| 87 | 110mm U-PVC SWR plain bend |
| 88 | 110mm U-PVC SWR vent cowl |
| 89 | Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C.10 lit PVC L/L Cistern |
| 90 | Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C.600x450x200 mm stainless steel kitchen sink (Mousumi make) |
| 91 | Supplying all materials, labour T&P and fixing wash basins with C.I. or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C.550mmx400mm W.H.basin |
| 92 | Fixing of Pedestrial for W.H.B |
| 93 | Supplying all materials, labour T & P and fixing mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden plugs with C.P. screws and washers complete as per P.H. specification and direction of E.I.C.600mmx450mm Mirror |
| 94 | Supplying all materials, labour T & P and fixing standard size glass shelf with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. screws as per P.H. specification and direction of E.I.C.125x600)mm size glass-shelf with C.PGuard rail |
| 95 | Supplying all materials, labour T & P and fixing standard size C.P. towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. screws as per P.H. specification and direction of E.I.C.20mmx600mm long C.P. towel rail |
| 96 | Supplying all materials, labour T & P and fixing standard size C.P. soap holder complete with C.P. Brass brackets fixed to wooden plug with C.P. screws as per P.H. specification and direction of E.I.C. |
| 97 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C.580mm size Orissa pan(Nycer/Cera/Hindware/Parryware) |
| 98 | Supplying all materials, labour, T&P and fixing wash down water closet(E.W.C) with integral S or P trap to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in C.M(1:1) etc all complete as per specification and direction of the E.I.C.E. W. C with P & Strap plain (Nycer/Cera/Hindware/Parryware) |
| 99 | Supplying all materials, labour, T & P providing and fixing to wall or ceiling and floor PVC pipe conforming to ASTM-D-1785/89 (sch-80) and pipe fitting of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C.Cutting Hole (250 mm thick wall) |
| 100 | Supplying all materials, labour, T & P providing and fixing to wall or ceiling and floor PVC pipe conforming to ASTM-D-1785/89 (sch-80) and pipe fitting of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C.20mm dia PVC pipe((Sh-80)(Internal) |
| 101 | 25mm dia PVC pipe((Sh-80)(External)) |
| 102 | 32mm dia HDPE pipe((Sh-80)(External)) |
| 103 | Supplying all materials, labour, T & P and fitting & brass/C.P. fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H. specification and direction of E.I.C.15mm dia CP Bib Cock(Short Body)(Jaquar Fittings) |
| 104 | 15mm dia CP Bib Cock(Long body) (Jaquar Fittings) |
| 105 | 15mm dia CP 2-in-1 Bib Cock (Jaquar Fittings) |
| 106 | 15mm dia CP Angle Stop Cock(Jaquar Fittings) |
| 107 | 15 mm dia CP Pillar Cock (Jaquar Fittings) |
| 108 | 15mm dia CP concealed stop cock (Jaquar Fittings) |
| 109 | 15mm dia CP revolving shower |
| 110 | 15mm dia CP Health Fuccet |
| 111 | 15mm dia C.P. Extension Piece |
| 112 | 15mm dia C.P. Flange |
| 113 | 125mm dia C.P. Grating |
| 114 | 25mm dia PVC fullway valve |
| 115 | Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.1000 lits capacity on the roof of Ground floor |
| 116 | Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to 15701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.L and placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.1000 lits capacity on the roof of Ground floor |
| 117 | Supplying all materials labour T & P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C. precast cover slab in c.c. (1:1½:3) using 12mm size h.g. chips, foundation concrete (1:3:6) using 40mm size h.g. metal on bed and around trap, K.B. Brick in c.m. (1:6) in F & P and inside 12mm thick c.p. (1:3) finished with a floating coat of neat cement including fixing 100mm size H.C.I. gully trap and grating etc. all complete as per approved drawing, specification and direction of E.I.C.Inside size 250mm x 250mm |
| 118 | Supplying all materials labour T & P and constructing inspection chamber of the following sizes with C.C. (1:36) using 40mm size h.g. metal on bed, 1st class K.B. Brick work in C.M. (1:6) moulding and shaping the channel inside and benching with C.C. (1:1.5:3) using 12mm size h.g. chips, 12mm thick C.P. (1:3) with punning to inside, cement flushpointing (1:3) to outside, R.C.C. cover slab in C.C. (1:1.5:3) using 12mm size h.g. chips with R.C.C. man hole cover, e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site, payment of royality, taxes etc. all complete as per approved specification and direction of E.I.C.Inside size 760mm x 760mm x 460mm |
| 119 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.Soak way Pit (0.90 m dia x 2.00m Deep) |
| 120 | Soak way Pit (1.20 m dia x 2.00m Deep) |
| 121 | Supplying all materials, labour, T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C.110mm dia p.v.c.pipe with allround encasing |
| 122 | 160mm dia p.v.c.pipe with allround encasing |
| 123 | Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7 cm and laying in layers not exceeding 0.30m in depth as per direction of E.I.C.Initial lift upto 1.50m |
| 124 | From 1.50m to 3.00m depth |
| 125 | Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C. |
| 126 | Supplying all materials labour T & P and providing C.C. (1:3:6) using 4cm h.g metal including watering, curing, conveyance of all materials to work site, payment of royality, taxes etc. all complete as per specification and direction of E.I.C |
| 127 | Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 128 | Supplying all materials labour T & P and providing brick work with K.B. Bricks having crushing strength not less than 75kg. / c.m2 with dimensional tolerance +/- 8% including watering, curing conveyance all materials to worksite payment of royality taxes etc. all complete as per specification direction of E.I.C. K.B. Brick work in c.n.(1:4) F & P |
| 129 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.12 mm thick C.P in C:M (1:3) |
| 130 | Supplying all materials labour T & P and providing cement punning for skirting including watering, curing, conveyance of all materials to work site, payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 131 | Supplying all materials labour T & P and providing rigid and smooth centering & shuttering for R.C.C. works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of E.I.C |
| 132 | Supplying all materials labour T & P and providing M.S. reinforcement for R.C.C. works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 133 | Supplying all materials labour T & P and providing R.c.c (1:1.5:3) .using 12mm h.g. chips for R.C.C. works including hoisting, laying, watering, curing, conveyance of all materials to work site, payment of royality, taxes etc. all complete as per specification and direction of E.I.C |
| 134 | Supplying all materials labour T & P and fixing of R.C.C. baffle wall precast with C.C. (1:1.5:3) using 12mm b.h.g. chips and fitted to septic tank as per P.H. specification and direction E.I.C. |
| 135 | Supplying all materials labour T&P and Providing cement flush pointing (1:3) to brick masonary including watering, curing, conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C. |
| 136 | Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C. |
| 137 | Labour for drilling a perfectly vertical bore hole at specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination rigs as required to suit the site condition as per the direction of the Engineer-in-charge including use of own rigs with its accessories, tools and plants and consumables etc for lowering of 200 mm dia P.V.C/G.I/MS pipes for housing fitted socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/P.V.C/M.S casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tubewell)Drilling of 125mm dia bore :- |
| 138 | Drilling of 100mm dia bore :- |
| 139 | Lowering of the following size G.I/P.V.C pipes with or without slotted pipes as per the necessary from ground level upto 30 mtrs depth and fitted and fixed up in perfectly vertical position including cutting and threading pipes and slotted pipe and supplying and fixing all jointing materials, tools and plants complete and keeping the top of the casing pipe threaded including plugging tubewell to prevent entry of foreign materials from above. Lowering of 125 mm dia PVC pipes :- |
| 140 | Cost of 125 mm dia PVC pipes :- |
| 141 | Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge is obtained from the tubewell including supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge. |
| 142 | Supplying a of I.S.I make 1.00 H.P single phase Submersible Pump set to give discharge of 3000 ltr/hour at a head of 40 mtr etc all complete as direction of EIC. |
| 143 | Supplying all labour,T&P and fitting & fixing of I.S.I make 1.00 H.P single phase Submersible Pump set with commissioning and testing etc all complete as direction of EIC. |
| 144 | Supplying and fitting & fixing of D.O.L starter for 1.0 H.P single phase Submersible Pump etc all complete as per direction of Engineer-in-charge. |
| 145 | Supplying and fitting & fixing of suitable cable and connecting the pump and starter etc all complete as per direction of EIC. |
| 146 | Supplying and fitting & fixing of Plastic rope, M.S well cover, M.S clamp, etc all complete as per direction of EIC. |
| 147 | Supplying all materials, labour, T&P and providing and fixing ISI marked Deep Well Hand PumpStandard HDWP conforming to IS-15500/04 Part-II complete with accessories alongwith 8 nos connecting Rod made with bright bar electro galvanized of 12 mm dia of 3 mt. long with coupler and fitted with stand assembly including fitting & fixing and lowering of Hand Pump set at the Tube well with 32 mm Nominal bore of 3 mtr. Long Hot Pit Galvanised Screwed and Socketed fitted wih 32mm dia PVC screwed & socket fitted with socket made of seamless or machined from solid bar socket fitted at one end and threaded protection at other end conforming IS specification inclunding carriage and conveyance of all material and T & P etc. all completas per the direction of E.I.C. |
| 148 | Supplying all materials, labour, T&P and matreials for construction of Tubewell platform as per UNICEF platform as per UNICEF drawing and design etc all complete as per direction EIC. |
| 149 | Supplying all materials, labour, T&P and matreials for construction of drain as per UNICEF design etc all complete as per direction EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender