Tender for Tender for Installation Of Air Conditioners In The Courts And Chambers Of The District Judge And Additional District Judge At The Family Court, Gautam Buddha Nagar District.
Tender Value
15.95 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
12 days left
EMD
1.60 Lakhs
Bank guarantee accepted
Document Fee
854
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of Air Conditioners In The Courts And Chambers Of The District Judge And Additional District Judge At The Family Court, Gautam Buddha Nagar District.
BOQ
| Sl. No. | Item Description |
| 1 | Part A - AC Work: Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 52 0C (out door ambient temperature). Inverter Type - Cooling only for 2.0 TR with 5 Star BEE Rating |
| 2 | 5 KVA Voltage Stablizer for Air Conditioner upto 2TR (130-300 Range) Copper Winding. |
| 3 | SITC of Suction/Discharge Copper pipe line in split AC unit 1.8/2.0 ton capacity including brazing, nitrile rubber insulation 9mm thick class 'O' etc complete 3/8\\" (9.50 mm) and 5/8\\" (15.90 mm) |
| 4 | Providing and fixing of CPVC pipe with all fitting 25mm dia including all material labour etc complete in all respect for drain water. |
| 5 | S/F of Outdoor unit stand for split type AC. |
| 6 | Supply and fixing of 2.5 Sq.mm 4 core PVC insulated round sheathed Cu conductor cable for stablizer to indoor unit. |
| 7 | Supply of 2.5 sq.mm, 3 Core PVC insulated round Cu conductor cable for connecting Indoor to Outdoor unit. |
| 8 | Part B - Electrical Wiring: Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. For 2 X 6 sq. mm + 1 X 6 sq. mm earth wire. DSR 1.14.4 |
| 9 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required. DSR 1.57 |
| 10 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). for 4 way (4 + 12), Double door. DSR 2.4.1 |
| 11 | Supplying and fixing following rating four pole (three phase and neutral) 415volts residual current circuit breaker (RCCB) having a sensitivity current 30mA in the existing in the existing MCB DB complete with connections, testing and commissioning etc. as required. for 63 Amp. DSR 2.15.3 |
| 12 | Supplying and fixing 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. For 6 to 32 Amp. Single pole. DSR 2.10.1 |
| 13 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. For 32mm. DSR 1.21.3 |
| 14 | Supply & Eracetionof factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreise Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above insulated with heat shrink sleeving and mounted on non gyroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm.Cubicletype switchboard shall be of cat A & B Only. CAT. B Cubicle Type. INCOMING: 100 Amp, 415V, MCCB=1No. OUTGOING: 63A MCCB 2Nos. SoR 20.1.1a(i) |
| 15 | Supply and laying of aluminium conducter PVC insulated armoured served sheathed cables 1100 volts grate at a depth of 750mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt on side and on top, as directed by E/I complete in all respects,The armouring of the cable shall be properly connected with the earth conductor by clamps etc. for 70 Sq. mm 3.5 core. SoR 20a.1.13 |
| 16 | Supply & laying of aluminum conductor PVC Insulated armored served sheathed cables 1100 Volts grade on wall surface as directed by Engineer-in-charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. for 35 Sq. mm, 3.5core. SoR 20c.1.11 |
| 17 | Supplying & making end termination with brass compression gland & aluminium lugs for following size of PVC insulated & PVC sheathed / XLPE aluminium cable of 1.1 KV grade as required. For 35 Sq. mm, 3.5core (28mm). DSR 11.1.21 |
| 18 | same as above but for 70 Sq. mm, 3.5core (38mm). DSR 11.1.23 |
| 19 | Supplying and installaton of 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastener etc as required. DSR 4.1.1 |
| 20 | Supplying and installation of 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastener etc as required. DSR 4.2.1 |
| 21 | Supplying and installation of 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastner etc as required. DSR 4.3.1 |
| 22 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. DSR 5.4 |
| 23 | Supply and laying of 25mm x 5mm G.I. strip at 0.5m below ground as strip earth electrode, including connection/ terminating with GI nut, bolt, spring, washer etc as required. (jointing shall be done by overlapping and with 2sets of GI nut bolt & spring washer spaced at 50mm). DSR 5.9 |
| 24 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required. For 100 mm dia. DSR 15.13.3 |
| 25 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. DSR 2.11 |
| 26 | Supplying and laying of Rubber mat 1000mm wide to withstand 11 KV dielectric strength as per latest IS 15652-2006 etc. as required. |
| 27 | Charges for road cutting for GI pipe and cable with proper dressing including material and labour. |
| 28 | Providing and fixing of 6 kg. Capacity ABC Stored Pressure type Fire Extinguisher bearing ISI Mark for Fighting ABC Class of Fire.The Extinguisher will be Manufactured Strictly as per BIS: 15683:2006 bearing ISI. mark. EN3 615 Approved Powder. ABC 87% MAP. Valve with additional facilities like Operating temperature marking on valve, Automatic safety release valve & Non Returnable Valve. |
| 29 | Providing and fixing of capacity - 4.5 kg. C02 type fire extinguisher (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. |
| 30 | Supply & Installation of Pigeon/Birds Protection transparant polycarbonate spikes having 310x30x125mm size & 33nos spikes, wire dia of spike-4mm, thickness-2mm with shelf life 5years including high strength, weather proof, heat proof, fire proof special features sticking by PV seal solvent complete in all respect on the all outdoor units as well as on the networking racks. Pestgo Plus or equivalent make Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender