Tender For Remaining Work Construction Of Veterinary Sub Center At Gambheera, District Bundi
Tender Value
5.74 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
1 days left
EMD
11480
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kota → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Remaining Work Construction Of Veterinary Sub Center At Gambheera, District Bundi
BOQ
| Sl. No. | Item Description |
| 1 | Part 'A' Civil Work |
| 2 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 mtr. Including of taking out the excavaed soil and depositing and refilling of jhiri with watering and ramming and disposal of surplus excavated soil as directed with in a lead of 50 mtr. All kinds of soil |
| 3 | Providing and laying in position cement concrete including curing compaction etc. Complete in specified graded excluding the cost of centering and shuttering All work up to plinth level 1:4:8 ((1Cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) |
| 4 | Filling in plinth with locally available river shingle under floors including watering ramming consolidating and dressing complete including cost of shingle sand. |
| 5 | Random Rubble dry stone Kharanja under floor |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing, compaction, finishing with rendering in cement sand mortar 1 : 3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. All works upto plinth level 1:1.5:3 (1 Cement : 1.5 Sand : 3 graded stone aggregate 20mm nominal size) |
| 7 | Reinforced cement concrete work in walls (any thickness) including attached pilasters buttresses, plinth and string coarses, fillets, column, pillars, piers, abutments, posts and struts etc. upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1 : 3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. 1:1:2 (1 Cement : 1 sand : 2 graded stone aggregate 20 mm nominal size.) |
| 8 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level Hot rolled deformed bars (IS : 1139) |
| 9 | Centering and shuttering with plywood or steel sheets including strutting, propping bracing bothways, removal of formwork for foundation in basements, raft, footing straps beams, bases of column etc. upto plinth level. |
| 10 | Centering and shuttering with plywood or steel sheets including strutting, propping bracing bothways with wooden members and removal of formwork for superstructure upto 4.5 mtr height above plinth level for a) Columns, pillars, posts and struts etc. |
| 11 | Centering and shuttering with plywood or steel sheets including strutting, propping bracing bothways with wooden members and removal of formwork for superstructure upto 4.5 mtr height above plinth level for a) suspended floors, roofs, lending, staircases, balconies, girders, cantilevers, bands, copying, bed plats, anchor blocks, sills, chajjas, lintel, beams etc. |
| 12 | Brick masonry in Superstructure upto third storey with flyash lime gypsum bricks of class designation 75 as per IS code 12894-2002 in CM 1:6 (1 Cement : 6 Coarse Sand) |
| 13 | Polished Blue Kota stone flooring, skirting laid over 20mm thick base of CM 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete.For area of each slab from 2001 to 5000 Sqcm.25mm thick slab. |
| 14 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehydration in glue both sides with approved steel fittings complete as per annexure 'A' 30mm thick Decorative teak veneer both side. |
| 15 | Providing and fixing pressed steel mitered door frames manufactured from commercial mild steel sheet of 1.25mm(16gauge) thickness including hinges jamb, lock jamb, head and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile 'A' |
| 16 | Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. |
| 17 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150 mm distance. |
| 18 | Renewing glass panes, with putty and nails wherever necessary :4mm thick plain glass panes. |
| 19 | Grading roof water proofing treatment with :Cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 20 | Providing batta (gola) 75 mm x 75 mm in cement concrete (1 : 2 : 4) including finishing with cement mortar 1 : 3 as per standard design. |
| 21 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :a) 20mm thick. |
| 22 | 12mm thick. |
| 23 | 6 mm cement plaster to ceiling of mix 1:3 (1 Cement : 3 Fine sand) |
| 24 | Painting with Acrylic Exterier Paint Birla/Nerolac/Asian/Berger of Equivelant of approved brand to give and even shade with all scaffolding two or more coat on new work after cleaning of existing surface complete in all respect. As per direction of Engineer in charge. |
| 25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding : New work (Two or more coats) over and including scrapping and priming coat with cement primer. |
| 26 | Painting with enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. |
| 27 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete Birla/J.K./Nerolac or ISO. As per direction of Engineer in charge. |
| 28 | Providing and fixing 1st quality standard coloured dark shades glazed tiles conforming to IS : 13753 for using joint free Tiles size above 300mm x 300 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete(excluding the cost of cement plaster on wall and pillar) |
| 29 | Providing and fixing 1st quality MAT finished ceremic tile size 300 x 300 mm confirming to IS : 13753 colour such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder (Untile of Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of the complete (including the cost of cement mortor bed 1:4).Category -A : Kajaria, Jhonson, Somani make |
| 30 | With 100 mm opening when closed. |
| 31 | Providing and fixing European type white glazed vitreous china 1st quality W.C. pan (IS : 2556 Mark) P or S Trap including cutting and making good the wall and floor. |
| 32 | Providing and fixing Indian Type white glazed vitreous china 1st quality W.C. Orissa pan (IS : 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor.Size 580 x 440 mm |
| 33 | P & F WVC wash basin (1st quality, IS : 2556 mark) of approved make with C.I. Brackets durly painted, 1 No. 15 mm C.P. Pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass waster coupling of approved make, 25 mm G.I. Waste pipe complete including cutting & making good the wall Size 550 mm x 400 mm |
| 34 | Providing and fixing 1st quality WVC Urinal (IS : 2556 mark) with 25 mm dia G.I. waste pipe, dome couplings, concealed iron brackets or screws etc.Complete Flat Back (large) or half stall size 590 x 375 x 390 mm |
| 35 | P & F low level flushing cistern of 10 liters capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock within ball (IS 1703 mark) complete including cutting and making good the wall. PVC wit PVC bend as per IS: 7231 |
| 36 | Providing and fixing C.P. Brass Urinal Spreader for stall urinal of approved make. |
| 37 | Providing and fixing Beveled edge Mirror of special glass of approved make (Atul / equivalent) complete with 6 mm thick asbestos cement sheet ground fixed to wooden screws & washers.Size 600 x 450 x 4 mm thick |
| 38 | Providing and fixing Towel Rail or Ring of approved quality / make.C.P. Brass Towel rail elbow type with concealed screws size 450 mm (Heavy Duty). |
| 39 | P & F Soap Dish or Tray of approved quality/make CP Brass (heavy and superior quality) |
| 40 | Stainless Steel Sheet Size 125 mm dia |
| 41 | Providing and fixing Polypropylene random copolymer Pipe made from PPR Type 3 Raw Material certified by bodycote with UV stabilized external layer in similar colour & approved by WR AS for it & potablity & including clamp, cutting and making good the walls & floors. (Internal Work)PN 2025 mm OD |
| 42 | 32mm OD |
| 43 | Providing and fixing Polypropylene random copolymer Ball Valve made from PPR Type 3 Raw Material certified by bodycote with UV stabilized external layer in similar colour & approved by WR AS for it & potablity & including complete etc.Ball Valve |
| 44 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: CP Brass 15mm nominal bore. |
| 45 | Providing and fixing Inlet Connection (Angle, Valves) Superior quality, of approved make.for wash basin Gyser etc. C.P. Inlet connection 15 mm.Brass (IS: 8931 marked) |
| 46 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.400 gm, 15mm. |
| 47 | P & F PVC Storage Tank (IS: 12701 Marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1M long G.I. Over-flow pipe & 25 cm. Long wash out pipe with plug & socket, including making connection etc., complete of approved design. 1000 Liters capacity |
| 48 | Construction of Chamber in all types of soil with 300 mm thick masnory in CM. 1 : 6, 100 mm thick C.C. 1 : 5 : 10 in foundation , 20 mm thick inside plaster in Cm 1 : 6, finished with floating neat cement 50 mm thick M-15 grade C.C. flooring earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 Mtr.Inside size 450 x 450 mm & depth upto 0.5 M & 15 Kg CI cover with frame |
| 49 | Providing and fixing rigid PVC pipe (IS:4985 mark) of class II (4Kg. / Cm2) approved quality/make including jointing the pipe with solvent cement rubber ring and lubricant.a) 110mm dia |
| 50 | Bend 87.50 |
| 51 | Construction of Soakage well in all types of soil 300mm thick dry stone masonry, top and bottom 300 mm course in CM 1 : 6, 80 mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring earthwork complete as per approved drawing including disposal of earth within a lead of 50 Mtr.Size 240 cm dia outside & 240 cm depth |
| 52 | Construction of Septic Tank in al types of soil with 40cm Thick masonry in CM 1:6, 15 CM thick C.C. bed of 1:5:10 M-15 grade C.C. flooring & over stone slab covering 80mm thick slab jointing of slab in CM 1:3 Ralthal, Kharanja, 50mm thick stone partition walls 20mm thick plaster in CM 1:6 finished with neat floating cement 4 Nos. C.I. foot rests of approved design two No. 450mm dia each Feroo cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr. size 200x100x130 (for 10 user) |
| 53 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required. (GROUP II) |
| 54 | Short point (up to 3 mtr.) |
| 55 | Medium point (up to 6 mtr.) |
| 56 | Long point (up to 10 mtr..) |
| 57 | Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. (GROUP II) |
| 58 | On board |
| 59 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required. (GROUP II) |
| 60 | 25 mm |
| 61 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. (GROUP II) |
| 62 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 63 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 64 | Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required.(GROUP II) |
| 65 | P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required. (GROUP I) |
| 66 | Single pole MCB |
| 67 | 6 A to 32 A rating |
| 68 | P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections, testing etc. as required. (GROUP I) |
| 69 | Double pole Isolator |
| 70 | 30 A / 40 A rating |
| 71 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. (GROUP I) |
| 72 | Double door (Single phase) |
| 73 | 12 Way |
| 74 | P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required. (Group II) |
| 75 | P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required.(Group II) |
| 76 | P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required (Group II) |
| 77 | 5 step fan regulator 2 Module |
| 78 | P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. |
| 79 | 10.0 Sq.mm (Group II) |
| 80 | 2 core |
| 81 | Maintenance free Gel Earthing with Pipe in pipe / Pipe in strip technology filled with anti corrosive conductive compound ( CPRI Tested ) below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineral filling compound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes. |
| 82 | With Pipe in Pipe Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI Coating |
| 83 | GI pipe 2000 mm long, 50 / 25mm, Terminal 12 mm GI Strip |
| 84 | S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. |
| 85 | 8 SWG G.I. ( Hot Dipped ) Wire |
| 86 | S & Laying following size' B ' class G.I. Pipe confirming to IS : 1239 P - 1 ( 1990 ) with accessories for laying earth conductor/strip / cable in ground/surface/recess as required |
| 87 | 40 mm dia. |
| 88 | P & F 1200 mm Sweep BEE 5 Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan complying to IS 374:1979, I/p 50 Watt at max speed & 230 Volt, air delivery >210 CMM, Speed > 330 RPM with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. (Group-I) |
| 89 | P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . |
| 90 | P&F of IP 20 LED tube light 20 Watt with external batten made from CRCA sheet steel suitable to replace T-8/T-12 tube light,integral driver,2000 lumen+5% tolerance system kumen efficacy of 100Lm/W minimum expected life time of 25000 burning hours,.CCT 5700K,ANSI,CRI 80,driver efficiency>85%,life expectancy of driver minimum 30000 hrs.P.F 0.95 at full load/230V AC(Group-I) |
| 91 | P & F ISI marked ding dong/musical chime bell including making connection testing etc. as required. |
| 92 | P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required.(Group I) |
| 93 | 300 mm sweep |
| 94 | P & F extra down rod of 15 mm dia . ERW (Electrical resistance welded ) of 1.6mm nominal thick medium duty steel pipe including cutting, threading, drilling, fixing quarter pin etc as reqd. |
| 95 | SITC of ISI mark( IS:8472) self priming monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively. (Group I) |
| 96 | 0.5 HP, 1-Ø, (6-28)Mtr, (52-12)LPM |
| 97 | Supply & Fixing ISI marked ( IS : 15683 ) Portable Fire Exitnguisher, ABC type,finished externally with red enamel paint, complete in all respects including initial fill and wall suspension of following capacity. (Group I) |
| 98 | 6 kg Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender