Tender For Renewal And Strengthening Of Chomu To Mahla Via Renwal, Jobner Road (Sh-8B,Sh-19,Sh-8A & Odr-2)( Km 25/500 To 61/500,74/160 To 80/740)
Tender Value
26.92 Crore
Estimated cost
Bid Submission
30 Jul 2026
3 days left
EMD
53.84 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renewal And Strengthening Of Chomu To Mahla Via Renwal, Jobner Road (Sh-8B,Sh-19,Sh-8A & Odr-2)( Km 25/500 To 61/500,74/160 To 80/740)
BOQ
| Sl. No. | Item Description |
| 1 | PART A - EARTH WORK |
| 2 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRTH Specification Clause 201. By Mechanical Means In area of non-thorny jungle |
| 3 | Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto1.5 m and lead upto 1000 m as per MoRTH Specification Clause 301.3Overburden on shoulders (10% area of shoulders) |
| 4 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300-1 and 300-2 with a lead upto 10 km as per MoRTH Specification Clause 305.3 |
| 5 | Scarifying old bituminous road by making 50x50mm furrows criss-cross at 1.0 metre intervals at 45 degree to the center line of the carriageway |
| 6 | PART B- WMM & HARD SHOULDER |
| 7 | Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400- 1,400-2 or any other course material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F.E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[MoRTH specification : Clause 401]. Bymechanical means with a lead of 1 km. For Grading-III MaterialFor all Rajasthan except Bikaner, Churu, Hanumangarh and Sriganganagar |
| 8 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400-12 & 400-13 and MoRTH Specification Clause 406. By Mechanical Means with 1 km lead. For all Rajasthan except Bikaner, Churu, Hanumangarh and Sriganganagar |
| 9 | Extra rate for carriage of mix material additional lead from (in item 4.6)From 2nd KM to 20th KMFor a lead of 20 KM |
| 10 | PART C -BT WORK |
| 11 | Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base (Stablised soil baes/Crusher Run Macadam) including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per MoRTH Specification Clause 502. |
| 12 | Providing and applying tack coat with Bitumen VG-10 using bitumen pressure distributor at the rate of 0.30 to0.40 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per MoRTH Specification Clause 503 and IRC-16-2008 |
| 13 | Providing and laying dense graded bituminous macadam with100-120TPH batch type HMP producing an average output of 75 tones per hour using crushed aggregates of specified grading, premixed with bituminous binder minimum @4.0& 4.5 percent by weightof total mix and filler, transport ingthehot mix to worksite, laying with ahydrostaticpaver finisher with sensor control to the requiredgrade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compactionasper MoRTH Specifications Clause 505 complete in all respects. Bitumen (VG-30) For All Rajasthan except Bikaner and Sri Ganganaga Grading - II (26.50 mm (Nominal Size) Qty = Area (As per above item No. 3 A) x thickness x density |
| 14 | Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average out put of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder minimum @ 5.2 & 5.4 percent ofmix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH Specifications Clause 507 complete in all respects For All Rajasthan except Bikaner and Sri Ganganagarfor Grading-II (13 mm nominal size) Bitumen (VG-30) |
| 15 | Providing and filling joint sealing compound in CC Pavement/Structures as per drawings and MoRTH specifications with coarse sand and 6 per cent bitumenby weight |
| 16 | PART D - PROTECTION WORK |
| 17 | Earthwork in excavation for structures as per drawing and MoRTH specifications Clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Ordinary soil Upto 3 m depth |
| 18 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 10 Nominal mix 1:3:6For all Rajasthan except Bikaner, Hanumangarh and Sriganganagar |
| 19 | Stone masonry work in cement mortar in foundation complete as per drawing and MoRTH specifications Clauses 1402, 1405, 2102& 2104. Random Rubble Masonry In 1:4 cement mortarFor all Rajasthan except Churu and Hanumangarh |
| 20 | Stone masonry in cement mortar for substructure complete as per drawing & MoRTH specification Clauses 1402, 1405 & 2200 Random rubble masonry In 1:4 cement mortarFor all Rajasthan except Hanumangarh |
| 21 | Plain/reinforced cement concrete in open foundation complete as per drawings and MoRTH specification Clauses 1702, 1703, 2102 ans 2104 P.C.C grade M 20 Nominal mix 1:2:4 |
| 22 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MoRTH specification Clauses 1409, 2204.4, 2206.4 &2706 |
| 23 | Plastering with cement mortar (1:3) 15mm thick on brickwork in parapet as per MoRTH specifications Clauses 1312.4For Protection wall |
| 24 | Providing PCC M-20 architectural coping on the top of wing wall, return wall etc. complete as per drawing and MoRTH specification Clauses 1313, 1411 and 2206.6 75 mm thick |
| 25 | Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MoRTH Specification Clause 801 |
| 26 | Ordinary Kilometer Stone (Precast) |
| 27 | 5th Kilometre Stone (precast) |
| 28 | 200 m stone (precast) |
| 29 | Supply of mandatory / regulatory reflective sign board fixed on 3 meter long Angle Iron of size 65x65x6 mm complete as per IRC-67-2012 made of 2 mm thick M.S. sheet stove enameled paint and reflective symbol. Comp. in all respect duly post painted in alternate band of Black/White synthetic enamel paint & hold fast at bottom. |
| 30 | Stop signs with definition plate size 30x20 Cm. 90 cm Octagon each |
| 31 | Give way signs with definition plate size 30x20 cm. 90cm equilateral triangle. |
| 32 | Prohibitory signs of circular shape. 60 cm dia |
| 33 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of65 mm width and required letters and figures with reflective tape engineering grade of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing and Specifications. 900 mm equilateral triangle |
| 34 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1 fixed over aluminium sheeting,1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and MoRTH Specification Clause 801 900mm equilateral triangle |
| 35 | Supplying & Fixing route Marker reflective sign boards consisting of shield marked on M.S. flat 14 gauge of size 40 x 60 cm and definition plate of 30 x 25 cm, 14 gauge, fixed on mild steel posts of T Iron or Angle Iron for NH/SH |
| 36 | Supplying of Cat’s Eye made of aluminium alloy size 75x100x22 mm having 21 biconvex lenses embedded incircular disk of ABS plastic on each side. |
| 37 | Labour charges for fixing of Cat's Eye as per MoRTHspecification excluding cost of Cat's Eye. |
| 38 | Supply of ‘L’ type Bollard made out of 1.25 mm thick M.S. sheet height 134 cm, welded in circular type ring section having upper dia 15 cm. and lower dia 21 cm with another attachment of 15x15 cm circular section with 15 cm. face plate and hold fast at bottom, whole body is processed in white stoving enamel and red reflective 3 hands, each of7.5 cm end one reflective sheet of 15 cm. dia provided to it complete in all respect. |
| 39 | Supply of Hazard Marker made out of 2 mm thick M.S. sheet size 300x300x3 mm framed with angle iron 25x25x3 mm and fixed on channel posts 75x40x6 mm and hold fast at bottom whole body is painted in white stoving enamel and 6 Nos., 5 cm dia reflective sheet on white reflective background with additional border of 1.25 cm allarount it. |
| 40 | Supply of Swiss type of Hazard marker, made out of 2 mm thick M.S. sheet size of box is 15x15 cm with hold fast at bottom, the body is painted in orange stoving enamel paint with white/high intensity grade micro-prismatic type sheeting, on all four side. |
| 41 | Supply of Chevron sign of size 75x60 cm made out of aluminum sheet 2 mm thick with fixing provision on M.S. angle iron post 50x50x6 mm 3 M long screwed with stainless steel nut bolts of 8 M dia, plate is covered by high intensity grade yellow retro-reflective sheeting and black screen printed arrow on Retro Reflective Sheet, complete in all respect. Comp. in all respect duly post painted in alternate band of Black/White synthetic enamel paint & hold fast at bottom |
| 42 | Supplying Direction and place identification sign board made out of 2 mm thick M.S. sheet framed to angle iron 40x40x5 mm and two vertical posts of angle iron of size 65x65x6 mm 3 meter long with hold fasts, stove enameled paint reflective letter symbol Comp. in all respect duly post painted in alternate band of Black/White synthetic enamel paint & hold fast at bottom 150 x 120 cm. |
| 43 | Fixing of sign board having two posts including excavation cement concrete 1:5:10(30X30X60 cms.) and transportation complete of size. : |
| 44 | 150x120 cm & 120x75 cm |
| 45 | 60x75 cm, 90x60 cm, 75x45 cm, & 60x45 cm. |
| 46 | Fixing of Hazard marker including excavation & cement concrete (1:3:6) (30x30x30cm size) in foundation, curing complete as per specifications. |
| 47 | Fixing of Bollard including excavation and laying cement concrete (1:3:6) (size 45x45x30cm) in foundation & curing complete as per specifications |
| 48 | P & F Delinator with 30 cm. outer dia RCC hume pipe NP-2 (As per IS-458/ 1971 ) pipe 1. OM. Long 40 cm embedded in cement concrete (1:4:8) block of size 50x50x40 cm. including excavation upto 40 cm depth. The inside of pipe shall be filled with C.C. (1:4:8) stone grit max size 20 mm or less upto the top with semi circular humping. The pipes shall be painted white/black withenamel paint with red dots two Nos. on each side |
| 49 | Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1. fixed over aluminium sheeting,2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRTH Specification Clause 801. Direction and Place Identification signs upto 0.9 sqm size board |
| 50 | Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ ground level, fixed on CRC rolled channel vertical post, 150 x 75 x 5 mm spaced 2 mm centre to centre, 1.8 m high, 1.1 m below ground / road level, all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS: 1367 and IS: 1364 , metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per MoRTH specification Clause 810. |
| 51 | Fabrication & assembling of over head gantry & cantilever type structure as per drawing & design including steel work in built up tubular trusses , cutting / hoisting, bolting & fixing in position & applying coat of red oxide paint including special type of nut, bolts( Bolt up to 750 mm ) and washers complete & finishing with grey enamel paint . |
| 52 | Supply of High Intensity retro reflecting Type IV sign plate made out of 2.0 mm thick aluminum sheet face to be fully covered with blue / green high intensity grade retro reflective sheet and logo/ matters, boarder made of with similar type of white sheeting after etching treatment of aluminum sheet , the back side is to be painted with epoxy grey paint. The plate is to be fixed on 40x40x5 mm angle iron frame with help of aluminum rivets. |
| 53 | Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160\\" C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. |
| 54 | Providing and Laying of Interlocking M-30 grade Concrete Block Pavements having thickness 80 mm as per drawings and as per IS15658:2006.and all materials shall conform to MoRTH Specification Clause 602 with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr EdgeBlocks. Category 'B' : Dentated only two side like I,Z,T shape as per IRC:SP:63-2004 |
| 55 | Note :- GST will be paid extra as per the GST provisions applicable from time to time. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender