Tender For Electrical Repairing Works For Cif , Laminar , Gen (I & Ii), Molecular , Technical Staff And Main Incommer Power Panel At The Department Of Microbiology, Assam University Silchar.
Tender Value
7.73 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
3 days left
EMD
15463
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cachar → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Electrical Repairing Works For Cif , Laminar , Gen (I & Ii), Molecular , Technical Staff And Main Incommer Power Panel At The Department Of Microbiology, Assam University Silchar.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required |
| 2 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 3 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 4 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 5 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 6 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI boxand earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 7 | Group C |
| 8 | Supply fitting fixing of the ISI marked flat PVC cassing n capping on finished wall/surface of size 32 X 12 mm (make AKG,Anchor, Polygrip,presto plast,polycab, MW) complete with necessary drill and fixing with required size screw complete as directed. |
| 9 | Supplying and fixing of following ways surface/ recessmounting, vertical type, 415 V, TPN MCB distribution board ofsheet steel, dust protected, duly powder painted, inclusive of200 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting MCBs (but without MCBs and incomer ) asrequired . (Note : Vertical type MCB TPDB is normally usedwhere 3 phase outlets are required.) |
| 10 | 4 way (4 + 12), Double door |
| 11 | 8 way (4 + 24), Double door |
| 12 | Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/Isolator) |
| 13 | 8 way , Double door |
| 14 | 12 way , Double door |
| 15 | SITC DOL contact starter for operation of AC units complete with required (L&T /Havells/Legrand) 2M pvc box, 2M face and base plate complete as directed. |
| 16 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 17 | Single pole |
| 18 | Double pole |
| 19 | Supplying with fitting and fixing panel mounting open execution 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.25 KA 415V 50 Hz 4P MCCB (Schneider, Legrand, Siemens, Indo Asian make) |
| 20 | 63A ,25 KA, 4P |
| 21 | 100 A, 30KA, 4 P |
| 22 | Supply, installation & testing of G.I. Plate earth station with 600 mmx600 mmx6 mm heavy duty G.I. earth plate with necessary 40 mm dia. G.I. watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm hinged cover C.I. cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . |
| 23 | Supply following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . |
| 24 | 50 Sq.mm 3.5 Core armoured U.G. cable |
| 25 | Laying of one number PVC insulated and PVC sheathed / XLPE |
| 26 | Above 35 sq. mm and upto 95 sq. mm |
| 27 | Supply following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . |
| 28 | 10 .00 Sq.mm 4 Core armoured U.G. cable |
| 29 | Laying of one number PVC insulated and PVC sheathed / XLPE |
| 30 | Upto 35 sq. mm |
| 31 | Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections butexcluding modular plate etc. as required. |
| 32 | 5/6 A switch |
| 33 | 15/16 A switch |
| 34 | 3 pin 5/6 A socket outlet |
| 35 | 6 pin 15/16 A socket outlet |
| 36 | SITC of 300 mm sweep exhaust fan complete as directed by the department |
| 37 | Supply and fitting fixing of 18W LED Batten Lights complete as directed.(Havells/Crompton.Bajaj) |
| 38 | Supplying and fixing of 20A ,415 V , TPN industrial type socket outlet with four pole and earth metal enclosed plug top alongwith 20A C curve TP MCB in sheet steel enlocuse on surface or in recess with chained metal cover for the socket out let and complete with connections testing and commissioning etc as required. |
| 39 | Wiring to 2 X 5 A pin 6 Amps modular plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Havells or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including two nos 5 pin 6A Modular type (2M) type plug socket and two nos 6 Amps modular(1M) switch (Legrand/havellls/L&T/Indo asian Glint) or equivalent make as approved by the Deptt.), PVC surface box (6M) switch board with required face plate complete (Legrand/havellls/L&T/Indo asian Glint) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. |
| 40 | Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 41 | Wiring for light/ power plug with 4X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 42 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 43 | Repairing and rewinding of 1200 mm ceiling fan alongwith necessary painting complete with ball bearing and bushing as required |
| 44 | SITC of ebonite sheet of size 10X8 inch complete as directed by the department. |
| 45 | Supplying and fixing following size/ modules, GI/PVC box alongwith modular base & cover plate for modular switches in recess etc as required. |
| 46 | 3 Module (100mmX75mm) |
| 47 | 8 Module (125mmX125mm) |
| 48 | 12 Module (200mmX150mm) |
| 49 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. |
| 50 | 3 Module |
| 51 | 8 Module |
| 52 | 12 Module |
| 53 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 54 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 55 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 56 | Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as required. |
| 57 | Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. |
| 58 | Any other SOR item based on Electrical DSR -2022 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender