Tender For Construction Of cement concrete Flooring For The Badminton Court At Satluj Hostel Of Iit Ropar
Tender Value
5.67 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
2 days left
EMD
11350
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rupnagar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of cement concrete Flooring For The Badminton Court At Satluj Hostel Of Iit Ropar
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: |
| 2 | All kinds of soil. |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge. |
| 4 | All kinds of soil. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 6 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 8 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | Centering and shuttering including strutting, propping etc. and removalof form for |
| 10 | Foundations, footings, bases of columns, etc. for mass concrete |
| 11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 12 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 13 | 12 mm cement plaster of mix : |
| 14 | 1:6 (1 cement: 6 fine sand) |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 16 | One or more coats on old work |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 18 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 19 | Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, including cleaning the surface of ail dirt, scales, oil, grease and other foreign material etc. and lining out complete |
| 20 | New work (Two or more coats) |
| 21 | Removing the existing badminton pole and refixing the same at the required location, including excavation, PCC foundation, alignment, levelling, curing, and making good surface, complete as per direction of Engineer-in-Charge. |
| 22 | 1 Layer – Acrylic Colour Sand Mix Paint (Dana Paint)Providing and Applying One Layer of Acrylic Colour Sand Mix Paint (Dana Paint) over the prepared acrylic cushion surface using approved sports flooring material, to provide a durable, textured, non-slip, and aesthetically pleasing playing surface. The coating shall enhance surface grip, improve player traction, provide uniform colour consistency, and ensure a wear-resistant finish suitable for outdoor sports applications,complete in all respects as per the direction by the Engineer-in-Charge. 1 Layer – Acrylic Top Coat Finish with Court Colour Scheme and Line MarkingProviding and Applying One Layer of Acrylic Top Coat Finish over the prepared acrylic sports flooring surface using approved sports-grade acrylic coating material, including colour coding of the playing area (e.g., Blue Inner Playing Area and Green Outer Area, or approved colour combination) to enhance visibility for players and spectators. The top coat shall provide a durable, UV-resistant, weather-resistant, non-slip and aesthetically pleasing finish. The item shall also include white court line marking as per standard dimensions and approved sports specifications, complete in all respects as per the direction of the Engineer-in-Charge. Court Marking with White Acrylic Line Marking PaintProviding and Applying Court Markings using approved white acrylic line marking paint over the completed acrylic cushioned sports flooring surface, strictly in accordance with the applicable game standards, court dimensions, and specifications for the respective sports facility. The markings shall be straight, uniform, durable, and clearly visible.The acrylic cushioned sports flooring system shall provide a comfortable, resilient, and enjoyable playing surface with enhanced player comfort, shock absorption, and sports performance. The work shall be carried out complete in all respects as per the direction of the Engineer-in-Charge. Note: The complete acrylic sports flooring system shall carry a minimum 03 (Three) years warranty against peeling, cracking, delamination, and manufacturing defects. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender