Tender For Water Proof Treatment On The Terrace Of Type-Vi/4 Staff Quarter At Ngri Colony , Hyderabad
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Jul 2026
2 days left
EMD
7000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Water Proof Treatment On The Terrace Of Type-Vi/4 Staff Quarter At Ngri Colony , Hyderabad
BOQ
| Sl. No. | Item Description |
| 1 | Civil Works |
| 2 | Removing of betumin sheet/ coating and cleaning throughly, burning the surface of the bitumin removed with kerosene burner or butane torch with , cleaning including chipping / hammering/haking by gunhammer and removing of water tank platforms and chipping of cement surface and clean the surface with instant spoll absover for cementing works complete the job, disposal of material Out side NGRI campus as desired by the contractor |
| 3 | Extra for providing and mixing water proofing material in cement plaster work including mixing of conplast X421C integral based water proofing compound or equivalent as per manufacturer specifications. |
| 4 | Providing and injecting approved grout in proportion recommended by the manufacturer of fosroc render roc plag /or equalient into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including,Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work arranging required nozzigle points for pumping and cutting of nipples maintaining the approximate gap bitween the nozziles up 300mm to to 600mm or as per site requirement after curing etc. complete as per directions of Engineer-inCharge |
| 5 | Providing and applying Three or more coats of asian damp proof or equalient of 1st quality and as approved brand cleaning of surface including sides of parapet wall up 300mm to complete the as per Instructions of Engineer-in-charage |
| 6 | Repairs to plaster of thickness 12mm to 40mm in patches of area 2.5 sq. metres or more area with 1:4 (1 cement : 4 coarse sand) and top layer 3 mm thick cement plaster 1:3 (1 cement : 3 fine sand) and mixing of water proof compound of Conplast X421 IC including disposal of rubbish to the dumping ground within Out side the NGRI or at dumping place near at site as suggested by Engineer-In-Charge. |
| 7 | Providing and fixing of on wall face unplasticised - PVC moulded fittings/ reducer 6\\" to 4\\" with accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 8 | Brick work with Cement mortar 1:6 (1 cement : 6 coarse sand) common burnt clay F.P.S. (non modular) bricks of class designation 35 in superstructure above plinth level up to floor V level in all shapes and sizes in |
| 9 | Providing and fixing 110mm diao n wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 10 | Providing and fixing bend 110mm dia on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 11 | Providing and fixing Shoe 110mm dia on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 12 | Providing and fixing GI 110mm dia clips/UPVC clips or equailant of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, Code including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 13 | Removing and Refixing of Synthex PVC water tanks / asbestos sheet tanks including necessary fittings without any damaged and if any one damaged by contractor , it had been replace with new one with his own cost ,arrange the julas, screws etc to complet the job as per Instructions of Engineer-In-Charge |
| 14 | Providing and fixing 20mm Chlorinated Polyvinyl Chloride (CPVC) pipes, with make of ashirwad or equalient having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge |
| 15 | Providing and fixing ball valve 25mm (Cpvc) of approved quality, High or low pressure, with platic floats complete the work as per instructions of Engineer-in-Charge |
| 16 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design to complete the job as per instructions of Engineer-In-Charge |
| 17 | Providing and laying APP (Atactic Polypropylene Polymer-make of LEAKSHIELD) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat and one bitumen coat , the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. Apply second coat of Hot bitumen on the top of LEAKSHIELD or equielant The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane including Priming the surface with solvent based primer @ 200 gms/Sqm on the prepared surface. to complete the job as per Instructions of Engineer-In-Charge (a) Guarantee Bond to be furnished for 10 years warranty and performance Bank Guarantee for additional 10% of value of this item to be furnished before releasing of final bill and to be extended every year till the guarantee period of 10 years. (b) Provision of Pond test:- The contractor / applicator have to provide for the pond test on the terrace after the completion of sealing of joints for 48 hours. The water level will be a minimum depth of 100 mm at the junction of terrace and parapet wall i.e. the highest point on the terrace. |
| 18 | Finishing the waterproofing treatment with a coat of solar reflecting Bituminous Aluminum paint @ 150 gms/sqm to complete the job as per Instructions of Engineer-In-Charge |
| 19 | Removing and Providing and fixing of 6\\" Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion and make the surface with cement mortar |
| 20 | Providing and fixing on PVC Pipe 150mm Dia wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender