Tender For Providing To Lwss Adjoining Rural Area Of Rohru Town In Tehsil Rohru Distt Shimla H.P (Sh- repair renovation Repllacement Of Old Damaged Pumping Machinery)
Tender Value
19.73 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
1 days left
EMD
39467
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing To Lwss Adjoining Rural Area Of Rohru Town In Tehsil Rohru Distt Shimla H.P (Sh- repair renovation Repllacement Of Old Damaged Pumping Machinery)
BOQ
| Sl. No. | Item Description |
| 1 | Supply, erection, testing & commissioning of horizontal spindle,horizontal split casing,radial split Single, /Multistages centrifugal pumps or combination of pumps, in series/parallel of recommended make such as Mather and Platt/KSB//Becon weir/Kirloskar/ BE/Jyoti or any other make approved from Jal Shakti Vibhag as per BIS 1520-1980 with upto date ammendments read with BIS 9137-1978 or latest edition to suitable for lifting clear water for under mentioned characteristics with bronze impellers/ priming funnels casing ring and shaft sleaves or bronze. shaft of steel grade-with cast iron casing coupled directly through a flexible coupling on a common C.I./Cast steel base platel (base plate to be from the manufacturers of the pumping unit only) to slip ring/squirrel cage screen protected drip proof induction motor of standard make such as Kirloskar/Crompton/Bhel/NGEF/ GEC/ Siemen/Jyoti/ABB or any other make approved from Jal Shakti Vibhag suitable for operation on 415(+) /-5% volts, 50 cycles/ second, 3 phase AC electric supply. The power of electric motor should be atleast 10% in excess of the maximum power required by the pump in the operation range of (+) 10% and (-)25% of the duty point head. The motor should be as per IS:325-1978 with upto date ammendments read with IS:900-1972. It should include cost of bearing nuts, bolts and pointing etc. and should meet the following requirements . |
| 2 | i) Discharge (Q) 2.85 LPS each pump. ( 2 no. pumps working at a time Simultaneously ) |
| 3 | ii) Total Dynamic head 400 mtrs. |
| 4 | a) LWL of sump well (h) |
| 5 | b) Shaft level |
| 6 | c) Level at discharge point |
| 7 | d) suction lift (+) head |
| 8 | e) Discharge head |
| 9 | f) Static head 360 mtr. |
| 10 | iii) Rising main |
| 11 | a) Length 2900 mtr. |
| 12 | b) Dia 50mm(H) |
| 13 | iv) Pumping hour 8 hours. |
| 14 | v) Altitude of installation above MSL mtr. |
| 15 | vi) Characterstics of water. Clear cold water |
| 16 | a) Temperature 0C. |
| 17 | b) Ambient temp. 0C. |
| 18 | c) Turbiduty JTU |
| 19 | d) Alkanality |
| 20 | e) Size of the solid NIL mm. |
| 21 | f) Other |
| 22 | Supply of 1x40HP L&T make fully Automatic Electrical control pannel complete in all respect as per the guidelines. |
| 23 | Supply of Kirloskar/Kilburn/IVC/Fouress/Gled/BHEL/Leader/ of reputed make of suitable size cast iron/cast steel double flanged sluice valve having size equal to delivery of pump and capable of with standing nominal seat pressure of 52 kg/cm^2NOTE:- The sluice valve shall conform to BIS 780-1984 latest with up to date ammend--ments.However if the seat pressure exceeds the limits prescribed in BIS 780 then thesluice valves shall be of cast steel conforming to class 150 ASA (Seat pressure 21 Kg/cm^2) or class 300 ASA (seat pressure 52 Kg/cm^2) or class 600 ASA (seat pressure 104 Kg/Cm2)as per BS 1414(API 600) .Cast Iron Sluice Valve Class P.N 1.0.Dia 50mm |
| 24 | P/L suitable size copper PVC insulated armoured power 3 core cable conforming to BIS 1554 (Part I) -1988 or latest with up to date ammendments Siemen/Gloster/ICCmake from meter of HPSEB to OCB & from OCB to Busbar switch & starter (one cable carrying all three phases) including all other electrical equipment/accessories suchas thimbles,flexible pipe,solder,nuts & bolts,cable glands etc. laid in pipes or trenches under floor .The type,size & make will be subject to approval of HPSEB authorities.In case of non acceptance by HPSEB authorities it shall have to be replaced by the tenderer free of cost..3x25mm three core |
| 25 | P/L suitable size copper PVC insulated armoured power 3 core cable conforming to BIS 1554 (Part I) -1988 or latest with up to date ammendments Siemen/Gloster/ICCmake from meter of HPSEB to OCB & from OCB to Busbar switch & starter (one cable carrying all three phases) including all other electrical equipment/accessories suchas thimbles,flexible pipe,solder,nuts & bolts,cable glands etc. laid in pipes or trenches under floor .The type,size & make will be subject to approval of HPSEB authorities.In case of non acceptance by HPSEB authorities it shall have to be replaced by the tenderer free of cost..3x16mm three core |
| 26 | Erection of all the equipments including cost of tees bends tapers and any other fitting making of comman header as per site conditions as per direction of engineer incharge. |
| 27 | P/L suitable size copper PVC insulated armoured power 3 core cable conforming to BIS 1554 (Part I) -1988 or latest with up to date ammendments Siemen/Gloster/ICCmake from meter of HPSEB to OCB & from OCB to Busbar switch & starter (one cable carrying all three phases) including all other electrical equipment/accessories suchas thimbles,flexible pipe,solder,nuts & bolts,cable glands etc. laid in pipes or trenches under floor .The type,size & make will be subject to approval of HPSEB authorities.In case of non acceptance by HPSEB authorities it shall have to be replaced by the tenderer free of cost..4mm three core cable for mono-sub pump for sump well. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender