Tender For annual repair & maintenance of To Various Roads Under Sub Division - Iv Of Division South Road-Ii, Pwd During 2026-27. (Sh:- Providing And Fixing Missing Railing, Irc Jali & Polycarbonate Sheet Under Jurisdiction Of Sub Division-Iv).
Tender Value
37.64 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
0 days left
EMD
75297
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of To Various Roads Under Sub Division - Iv Of Division South Road-Ii, Pwd During 2026-27. (Sh:- Providing And Fixing Missing Railing, Irc Jali & Polycarbonate Sheet Under Jurisdiction Of Sub Division-Iv).
BOQ
| Sl. No. | Item Description |
| 1 | DSR ItemsExcavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. |
| 2 | All kinds of soil |
| 3 | Providing and laying in position excluding cement concrete of level: specified grade the cost of centering and shuttering - All work up to plinth |
| 4 | 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 6 | Hot finished welded type tubes |
| 7 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 8 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 9 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. |
| 10 | G.I. pipes |
| 11 | Providing and fixing multi walled transparent /opaque 10 mm thick polycarbonate sheet of required colour blue, brown or green etc. UV co-extruded and having UV coating on one side multi walled sheet of weight not less than 1.60 to 2.05kg/sqm as approved by Engineer-in-charge. The light transmission from transparent or translucent or opaque polycarbonate sheet varies from 30 to 80% and shall be decided by engineer in charge as per requirement. The panel shall satisfy the Dart drop impact test for value above 15 and upto 60 Joules and confirm either fame retardancy of class UL-94HB/94V-0 category as per ISI4434:2023 or category VO & HB as per ASTM D635-I8 or BSI DO classification as per EN13501 for fire safety. The yellowness index tested as per ASTM E313 (DI925) shall be less than or equal to 2 or it shall be I units as per ASTM D 2244 at the time of installation and shall be less than or equal to 10 as per ASTM E313 (1) 1925) or 6 units as per ASTM D 2244 on a sample after 5000 Hours of exposure of UV / sun light. The multi walled poly carbonate sheet shall he fixed on tubular steel structure with aluminium Alcox section of size 60x18x2 mm (anodized 25 micron thick) and weight not less than 0.462 kg/metre. Weather proof Neoprene/ EPDM rubber gasket shall be fixed on both side of joints to make the whole structure water tight as per approved design/drawings. The aluminium section shall be fxed on Joints at both sides (top & bottom) of polycarbonate sheet to hold the sheets rigidly together. The weather proof neoprene gasket and aluminium profile shall be fixed and sealed with silicon sealant to make the Joints fully water proof. The open overhead ends of polycarbonate sheet to be sealed with anodised aluminium U Profile/ channel of size 10x10x 1.5 mm thick of weight not less than 0.2kg/m. The polycarbonate sheet and aluminium profile shall be fixed to MS Framed Structure with self-taping and self-drilling 55mm long steel screws to be fixed @ 300mm centre to centre. The rate shall be inclusive of cost of all material involved such as polycarbonate sheet, aluminium profile and aluminium channel, EPDM gasket, Self-taping screws, nut bolts, Silicon sealant or any other material required for fixing the sheet but excluding the cost of steel structure which shall be paid separately including hoisting the sheets and fixing in position in required scaffolding shape. The rate shall also include the cost of all T & P scafolding and safety precautions required during execution of the work. The entire work shall be executed |
| 12 | 10 mm thick and U- value not more than 2.50 W/m2K |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 14 | Two or more coats on new work |
| 15 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 16 | Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) |
| 17 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.( Note:- Payment will be made as per wight slips issued by authorised MCD dumping ground after dumping of malba. Processing fees at prescribed rate of authorised MCD dumping ground will be submitted by the agency & shall be reimbursed by the department on production of receipt in original ) |
| 18 | Modified Estimated Cost after using Correction factor on DSR 2023 on account of GST @ 0.973 |
| 19 | (Add Cost Index @ 4.03% on DSR Items) |
| 20 | Non DSR Items Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75Kg per sqm to fixing / tightening with M.S. Angle / M.S. Tee Frame of required size with beading of M.S. Flat 20x3mm @ 0.48 Kg/m fixing by electric welding i/c priming coat with approved steel primer all complete as per direction of engineer-in-charge.(Rate includes cost of Hard Drawn steel wire febric and M.S. Flat. Payment of M.S. Angle / M.S. Tee Frame shall be made separately in relevant item.) |
| 21 | Credit for dismantled steel reinforcement/ railing/ all steel works to be taken by contractor (dismantled steel reinforcement/railing / all steel will be property of Contractor) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender