Tender For Renovation Of Hostel Building No-1 And No -2 At S.T. Residential High School, Shikaripara, Block- Shikaripara, Dist- Dumka.
Tender Value
71.32 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
5 days left
EMD
1.43 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dumka → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Hostel Building No-1 And No -2 At S.T. Residential High School, Shikaripara, Block- Shikaripara, Dist- Dumka.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Jul-2026 | NIT | Other | 05-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Providing 6mm. Thik cement plaster (1:4) in ceilling with clean coarse sand of sand of F.M. 1.5 including screening , curing with all leads and lifts of water , scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 2 | Providing 12mm. Thik cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening , curing with all leads and lifts of water, scaffolding taxes and all complete as per building specification and direction of E/I |
| 3 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I. |
| 4 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter |
| 5 | Single pushfit Coupler 110 mm |
| 6 | 110 mm Shoe (Plain) |
| 7 | Single tee with door - 110x110x110 mm |
| 8 | 110 mm Bend |
| 9 | Providing 19mm. thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening , curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 10 | supplying fitting and fixing 20 gauge G.C.I sheet gate fitted on ms angle frame of size 60x60x6 mm . Including cost of fabrication providing necessary locking arrangement with huskle and domny duly fixed in pcc blocks of required size applying a priming red led paint over sheet work...do..e/i |
| 11 | supplying fitting and fixing m.s grill gate with ms grill made of 20x6mm ms flat or 16 mm ms square brass fitted on 25x25x6 mm ….do.. e/i |
| 12 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 13 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone of fine sand paper applying putty wherever required scaffolding , washing of floors and taxes all complete as per building specification and direction of E/I. |
| 14 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 15 | Providing one coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 16 | Providing and laying in Posision specified grade of reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° lanings, balconies, sheleves , chajjas, lintels, bends, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering dhuttering, finishing and reinforcement, with 1:1.5:3 (1 Cement :1.5 Coarse Sand (zone-III) :3 garded stone aggregte 20mm nominal size) Chajjas |
| 17 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 18 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) 8mm dia |
| 19 | 10 mm dia dia |
| 20 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 21 | Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 22 | Point wiring in PVC conduit, with modular type switch, wiring for light point/Fan point/exhaust fan point/ call bell point with 1.5sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. |
| 23 | S/F modular type switch/socket: Supplying and fixing modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps, one way switch |
| 24 | 15/16 amps, one way switch |
| 25 | 3 pin 5/6 amps, socket outlet |
| 26 | 15/16 amps, 6 pin socket outlet |
| 27 | Circuit/ sub - main wiring in PVC conduit: Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as per required.2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire |
| 28 | 2 x 2.5 Sq.mm + 1 x 2.5 sq. mm earth wire |
| 29 | 2 x 4 Sq.mm + 1 x 4 sq. mm earth wire |
| 30 | S/F PVC conduit : Supplying and Fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 31 | 25 mm |
| 32 | S/F PVC/G.I. boxes : Supplying and fixing of following sizes of PVC/G.I box on surface or recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 72 mm x 146 mm x 48 mm deep/ (4\\" x 7\\") |
| 33 | 210 mm x 206mm x 48mm deep/ (10\\" x 12\\") |
| 34 | S/F modular type blanking plate : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 35 | S/F modular type electronic fan regulator : Supplying and Fixing stepped type electronic fan regulator on the existing modular plate & switch box including connections but excluding modular plat etc. as required |
| 36 | S/F modular boxes, base & cover plate : Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 4/5 module (78mm x 140mm x 50mm) |
| 37 | S/F ceiling rose : Supplying and fixing 2 pin, 5 amp. Ceiling rose on the existing junction box / wooden block including connection etc as required. |
| 38 | S/F batten holder : Supplying and fixing batten / angle holder including connection etc as required. |
| 39 | ITC ceiling fan : Installation testing and commissioning of ceiling fan, including wiring the down rods of standard length ( upto 30 cm ) with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable etc. as required |
| 40 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts “C” curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 41 | Supply and fitting Decorative 1200 mm ceiling fan Bajaj/Usa/ Crompton /Anchor or any other approved make quality etc all complete job. |
| 42 | Supply fitting and fixing (20/22W) LED Btten light Starter of approved make quality etc complete job. |
| 43 | Supply fitting and fixing (9/10W) LED Bulb light Starter of approved make quality etc complete job. |
| 44 | Supplying fitting and fixing 40mm high vitreous white glazed earthen E.W.C. with ‘p’ trap of Parry Hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. and bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450grams 15mm PVC alkathene pipe 45cm long with brass coupling at both ends and white /black plastic solid state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming, all complete as per specification and direction of E/I. |
| 45 | Supplying fitting and fixing vitreous white glazed earthenware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. |
| 46 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conformin to IS : 5382 , leaving 10 mm gap for thermal expansion.110 mm Door Tee (Supereme) P.V.C. |
| 47 | 110 mm Plain Bend (Supereme) P.V.C. |
| 48 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (Wt. not less than 350gms. ) with extra socket all complete as per specification and direction of E/I. |
| 49 | Providing and fixing PTMT bib cock of approved quality and colour15 mm nominal bore, 122 mm long. Weighing not less than 99 gms. |
| 50 | Providing and fixing PTMT stop cock of approved quality and colour 20 mm nominal bore, 89mm long. Weighing not less than 88 gms. |
| 51 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and Cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.20 mm nominal outer dia pipes |
| 52 | 25 mm nominal outer dia pipes |
| 53 | 32 mm nominal outer dia pipes |
| 54 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete20mm dia |
| 55 | 32mm dia |
| 56 | Providing and fixing brass stop cock of approved quality all complete as per specification and direction of E/I. 20mm dia |
| 57 | 32mm dia |
| 58 | Supplying laying and fixing G.I.. fittings of approved quality and make all complete as per direction of E/I.20mm dia |
| 59 | 25mm dia |
| 60 | 32mm dia |
| 61 | b) Tee plain20mm dia |
| 62 | 25mm dia |
| 63 | 32mm dia |
| 64 | c) Reducing Socked.20mm dia |
| 65 | 25mm dia |
| 66 | 32mm dia |
| 67 | d) Plug15mm dia. |
| 68 | f) Union Socket20mm dia. |
| 69 | 25mm dia |
| 70 | 32mm dia |
| 71 | g) Jam nut15mm dia. |
| 72 | H) Socket plain20mm dia |
| 73 | 25mm dia |
| 74 | 32mm dia |
| 75 | I) Reducing Tee. Plain20mm dia |
| 76 | 25mm dia |
| 77 | 32mm dia |
| 78 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and Cold water supply including all CPVC plain & brass thereded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chaes and making good the walls etc.20 mm nominal outer dia pipes |
| 79 | 25 mm nominal outer dia pipes |
| 80 | Providing and fixing PTMT push cock of approved quality all complete as per direction of E/I |
| 81 | SEPTIC TANK & SOAKPIT -Earthwork in excavation in foundation trenches in ordinary & Hard soil (vide classification of soil item -B) and disposal of excavated earth as obtained to a distance up to 50 M. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I |
| 82 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm. thick with all leads including cost of materials, labor, royalty and taxes all complete as per building specification and direction of E/I (mode of measurement compacted volume) |
| 83 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering, taxes, royalty, all complete, as per building specification and direction of E/I. |
| 84 | Providing and laying in Posision cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1:2:4 (1 Cement :2 Coarse Sand (zone-III) : 4 garded stone aggregte 20mm nominal size) |
| 85 | Providing designation 75A brick work in C.M. (1:4) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 86 | Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.(scok pit hany camb wall as solid) |
| 87 | Providing and laying in Posision specified grade of reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° lanings, balconies, sheleves , chajjas, lintels, bends, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering dhuttering, finishing and reinforcement, with 1:1.5:3 (1 Cement :1.5 Coarse Sand (zone-III) :3 garded stone aggregte 20mm nominal size) Beam of All types |
| 88 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound and 1.5mm cement punning including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 89 | Providing and laying in Posision specified grade of reinforced cement concrete work in archs, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° up to floor five level, excluding the cost of centering shuttering, finishing and reinforcement, with 1:1.5:3 (1 Cement :1.5 Coarse Sand (zone-III) :3 garded stone aggregte 20mm nominal size) - roof slab |
| 90 | Centering and Shuttering including strutting, proping etc and removal of form for Spiral staircases (Including landing) . |
| 91 | Providing Bricks bats at kiln site (63mm to 43mm size) for soak pit & taxes and roalty all complete as per building specification and direction of E/I. |
| 92 | Providing Jhama khoa/matel (63mm to 43mm size) for soak pit & taxes and roalty all complete as per building specification and direction of E/I. |
| 93 | Providing tor steel reinforcement of 10mm, 12mm, 16mm dia bars as per approved desogn and drawing with cutting, bending and binding with annealed wire with cost of wire removal of rust, placing the rods in position (including carriage of bars to work site) all complete as per per building specification and direction of E/I. |
| 94 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm dia |
| 95 | Supplying labours and tools for laying & joining U. P. V. C. specials in trenches as per specification and direction of E/I. ( U. P. V. C. special, like, tee, bends taper collar and solvant cement to be supplied free of cost departmentally )PVC Plain Tee (110mm dia) |
| 96 | PVC Plain Bend (110mm dia) |
| 97 | Disposal of excavated earth up to 1Km |
| 98 | Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I. |
| 99 | Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume). |
| 100 | Earth filling in foundation trenches and plinth in layer not exceeding 150mm thick will watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenched with a lead of 50mm and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume). |
| 101 | Providing designation 75 B one brick flat soling joints with local sand including cost of wateringtaxes and royalty all complete as per building specification and direction of E/I |
| 102 | Providing and laying in position specified grade of cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:2:4(1 cement : 2 coarse sand (zone-III):4 graded stone aggregate 20 mm nominal size) |
| 103 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto plinth level , excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 104 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 105 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 106 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 107 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 108 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL)8 mm dia |
| 109 | 10 mm dia |
| 110 | 12&16 mm dia |
| 111 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I. |
| 112 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I. |
| 113 | Supplying fiting and fixing M.S. Grill gate with M.S. grills made of 20x6 mm M.S. flats or 16 mm M.S. square bars fitted on 25x25x6 mm M.S. angle frame of size 60x60x6 mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) block of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I (When steel is not supplied by the deptt.) . |
| 114 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust , dirt, , scales , smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. ( Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specification) |
| 115 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l. |
| 116 | Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I. |
| 117 | Earth filling in foundation trenches and plinth in layer not exceeding 150mm thick will watered rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenched with a lead of 50mm and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted volume) |
| 118 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.60 mm thick C.C. paver block of M-30 grade with approved color design and pattern. |
| 119 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) |
| 120 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. |
| 121 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 122 | Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 123 | Providing designation 75B one brick on edge soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 124 | Providing PCC M-20 in nominal mix of (1:1.5:3) in foundation and plinth with approved qality of stone chips 20mm to 6mm size graded and clean coarse of F.M 2.5 to 3 including ,mixing cement concrete in mixer and placing in position ,vibrating,striking,curing,taxes and royality all complete as per building specification and direction of E/I. |
| 125 | Centering and shuttering including strutting,proping etc and removal of form for foundation all complete as per direction of E/I |
| 126 | Carriage of MaterialCemnt=25 km |
| 127 | Sand=12 km |
| 128 | Stone Chips=14 km |
| 129 | Brick=58 km |
| 130 | Paver 8Km |
| 131 | Steel 25 km |
| 132 | Add 18% for G.S.T. |
| 133 | Labour Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 05, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender