Tender For Construction Of Prefab Cottage At Paryatan Vihar, Patratu In Ramgarh District
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Jul 2026
1 days left
EMD
3.25 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramgarh → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Prefab Cottage At Paryatan Vihar, Patratu In Ramgarh District
BOQ
| Sl. No. | Item Description |
| 1 | Supply , Installation, testing and commissioning of single occupancy cottage of 465 sq.ft as per approved drawingsScope of Work (Vendor):• Foundations: Precast foundation system with prefab steel floor base.• Structure: Hybrid system with Light Gauge Steel Framing with CNC fabrication and mild steel load-bearing sections.• Structure Wrapping: OSB boards on exterior & interior (waterproof, termite-resistant).• Insulation: 100 mm Rock Wool 48 kg/m³ for walls & roofs.• Waterproofing: Full external surface covered with membranes & sealed with aluminum tapes.• Internal Walls & Ceiling: Gypsum boards over OSB, painted as per client’s choice; pine wood cladding optional.• External Walls & Roof: wood-finish cement fiber planks, roof with Technonicol asphalt shingles (50-year warranty).• Internal & External Floors: Wooden laminate/vitrified tiles , Thermo Pine decks with weatherproof oils.• Deck Railing: Thermo Pine balusters 90x90mm with 10mm thick glass panels, handrails from 140x26mm Thermo Pine.• Doors & Windows: Laminated flush doors, UPVC doors/windows with 5mm glass, mosquito mesh.• Plumbing & Toilet Fittings: CPVC pipes, fittings, WC, washbasin, faucets.• Electrical: Switches, sockets, fans, LED lights; concealed AC piping.• Furniture & Fixtures: Bathroom vanities included. furnishings also included • Warranty: 20-year structural warranty, design life over 50 years. |
| 2 | Supply , Installation, testing and commissioning of double occupancy cottage of 790 sq.ft as per approved drawings Scope of Work (Vendor):• Foundations: Precast foundation system with prefab steel floor base.• Structure: Hybrid system with Light Gauge Steel Framing with CNC fabrication and mild steel load-bearing sections.• Structure Wrapping: OSB boards on exterior & interior (waterproof, termite-resistant).• Insulation: 100 mm Rock Wool 48 kg/m³ for walls & roofs.• Waterproofing: Full external surface covered with membranes & sealed with aluminum tapes.• Internal Walls & Ceiling: Gypsum boards over OSB, painted as per client’s choice; pine wood cladding optional.• External Walls & Roof: wood-finish cement fiber planks, roof with Technonicol asphalt shingles (50-year warranty).• Internal & External Floors: Wooden laminate/vitrified tiles Thermo Pine decks with weatherproof oils.• Deck Railing: Thermo Pine balusters 90x90mm with 10mm thick glass panels, handrails from 140x26mm Thermo Pine.• Doors & Windows: Laminated flush doors, UPVC doors/windows with 5mm glass, mosquito mesh.• Plumbing & Toilet Fittings: CPVC pipes, fittings, WC, washbasin, faucets.• Electrical: Switches, sockets, fans, LED lights; concealed AC piping.• Furniture & Fixtures: Bathroom vanities included. furnishings also included • Warranty: 20-year structural warranty, design life over 50 years. |
| 3 | Prefabricated Sitting DeckSupply , Installation, testing and commissioning of Prefabricated Sitting Deck of 50.26 sqm as per approved drawingsScope of Work (Vendor):• Foundations: RCC Precast foundation system upto Gorund level only, with prefab mild steel floor base, followed by 18 mm cement fiber board over steel floor base.• Steel Frame : Tata/Jindal/Similar as per IS standards for super structure.• Composite Panels: Anti skid WPC composite panels (wooden finish) for floor of deck.• Deck Railing: Thermo Pine balusters 90x90 mm, handrails from 140x26 mm Thermo Pine. All treated with weatherproof oils.• Furniture: furnishings also included. |
| 4 | Prefabricated Elevated PathwaySupply , Installation, testing and commissioning of Prefabricated Sitting Deck of 50.26 sqm as per approved drawingsScope of Work (Vendor):• Foundations: RCC Precast foundation system upto Gorund level only, with prefab mild steel floor base, followed by 18 mm cement fiber board over steel floor base.• Steel Frame : Tata/Jindal/Similar as per IS standards for super structure.• Composite Panels: Anti skid WPC composite panels (wooden finish) for floor of deck.• Deck Railing: Thermo Pine balusters 90x90 mm, handrails from 140x26 mm Thermo Pine. All treated with weatherproof oils. |
| 5 | Horticulture and Landscaping |
| 6 | Supply Works |
| 7 | Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment). |
| 8 | Screened through sieve of IS designation 20 mm |
| 9 | Screened through sieve of IS designation 16 mm |
| 10 | Screened through sieve of IS designation 4.75 mm |
| 11 | Supplying and stacking of well decayed cow dung manure at site including royalty and carriage up to 1.0 km (cow dung manure measured in stacks will reduced by 8% for Payment) |
| 12 | Preparation Works |
| 13 | Fine dressing of the ground |
| 14 | Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-in-charge |
| 15 | Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Engineer-in-charge (cost of sludge, dump manure and / or good earth to be paid separately). |
| 16 | Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts |
| 17 | Grassing Works |
| 18 | Providing & laying of Selection no. 1 Doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same and maintenance for 30 days or more till the grass establish properly, as per direction of the officer-in-charge. |
| 19 | Maintenance Works |
| 20 | Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing, weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers (whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge. |
| 21 | Boundary Wall & Septic Tank |
| 22 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. |
| 23 | Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) |
| 24 | Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume) |
| 25 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. |
| 26 | Foundation |
| 27 | Providing designation 75B one brick flat soiling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of Engineer |
| 28 | Foundation |
| 29 | Providing designation 75B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete as per building specification and direction of E/I. |
| 30 | Providing designation 75B brick work in C.M (1:8 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 31 | Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3\\") in C.M. (1:6) in superstructure with approved uality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 32 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 33 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) |
| 34 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. |
| 35 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 36 | Plain Concrete Cement (P.C.C)Providing and laying in Position cement concrete of specific grades excluding the cost of centering and shuttering -All works up to plinth level : 1:2:4 (1 Cement : 2 Coarse sand (zone-iii): 4graded stone aggregate 40 mm nominal size) |
| 37 | Foundation |
| 38 | Reinforcement Concrete Cement (M-25 R.C.C)Providing and laying in position machine batched and machine mixed design grade cement concrete for reinforced cement concrete work, using cement content as approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing, and reinforcement, including admixture in recommended proportions as per IS: 9103 to accelerate retard setting of concrete, improve workability without imparing retard setting of concrete, improve workability without imparing strength durability as per direction of Engineer-in -charge. (Note :-Cement content considered in this item is 330kg/cum. Excess/less cement used as per design mix is payable/recoverable seperately). |
| 39 | All the works upto plinth |
| 40 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 41 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 42 | Foundations, footings, bases of columns, etc. for mass concrete |
| 43 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 44 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 45 | Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). |
| 46 | Wall Joint of 100 mm gap |
| 47 | Providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) |
| 48 | Providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. |
| 49 | (a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)} |
| 50 | (b) 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}) |
| 51 | Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 52 | Providing 6 mm thick cement plaster (1:4) in ceiling with clean of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 53 | Internal Plaster |
| 54 | Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 55 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 56 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) |
| 57 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 58 | External Electrical Works |
| 59 | 7 Mtr. height Octagonal Hot - Dip galvanized pole (BOP - 7030) with top dia 70 mm, bottom dia 130 mm & made of 3 mm thick sheet, base plate dimensions 200 X 200 X 12 mm ( L x B x T) including suitable sizes of foundation bolt all complete as reqd. (Without Arm) (Basic Rate: Rs.11730.00 + overhead & profit @ 14.95% = Rs.13483.63) |
| 60 | 1 meter Single Arm suitable for 70mm Top (Basic Rate : Rs. 1380.00 + Overhead & profit @ 14.95% = Rs. 1586.31 ) |
| 61 | Installation, Testing & Commissioning of the 7 Mtr. Octagonal Pole & light fitting with the help of suitable tools and plants, wiring of luminaires with all materials and construction of shallow foundation with M25 grade concrete considering safe soil bearing capacity of 10T/mtrs sq. (Basic Rate : Rs. 5400.00 + Overhead & profit @ 14.95% = Rs. 6207.30 ) |
| 62 | S/F 6 amps to 32 amps rating 240 volts, ‘C’ series miniature circuit breaker suritable for lighting and other loads of following poles in the existing MCB DB complete with connection, testing and commissioning etc. as reqd.6/32 amps,Single pole |
| 63 | SITC of following rating LED street lighting luminari with pressure die cast housing and toughtend glass cover ,IP 66 protection,lumonous EFFICARY>=110 LM/W with lens in existing pole/pipe for supply voltage 100-270 V AC,50 Hz.Luminarie shall be confirm to IS:10322 part 5/section 3 and shall be complete with all necessery accessories as reqquired.120W LED street light |
| 64 | Supplying and drawing following size of FR PVC insulated copper conductor single core cable in existing surface/recessed steel/PVC conduit including dismantling as required 3x1.5 sqmm |
| 65 | Supply of XLPE insulated sheathed (heavy duty) armoured electric cables with Aluminium conductor for working voltage 1100 volts conforming to IS:7098 (part-1)/IS:1554; 4 core x16 sq mm (Basic Rate: Rs. 221.00 + Overhead & Profit @ 14.95% = Rs. 254.03) |
| 66 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required; 4 X 16 sq. mm (28mm) |
| 67 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size not exceeding 35 sq mm direct in ground including excavation, cushioning, protective coveringand and refilling the trench etc. as required |
| 68 | Supplying and laying of 40mm dia medium class GI pipes for road crossing (Basic Rate: Rs. 300.00 + Overhead & Profit @ 14.95% = Rs. 344.85) |
| 69 | Earthing with GI earth pipe 4.5 mtr long,40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. |
| 70 | Supplying and laying 6 SWG GI wire at 0.50 meter below ground level for conductor earth electrode, including soldering etc as reqd. |
| 71 | S.I.T.C of Outdoor stand mounted feeder peelar with 63 amps TP&N,MCB incomer ,65 amps TP contractor automatic switch of luminaries,power tool control incommer outgoing terminal etc as required. (Basic Rate: Rs. 27800.00+ Overhead & Profit @ 14.95% = Rs. 31956.10) |
| 72 | Heavy duty,armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts. |
| 73 | 2c x 10 mm2 1.1kV |
| 74 | Earhting with copper earth plate 600mmx600mmx3m thick including accessories ,and providin, masonry enclose with copper plate having locking arrangemen and watering pipe etc. Iwith charcole or coke and salt as required. |
| 75 | P/F 25 x 5mm copper earth strip in ground :- |
| 76 | Providing and fixing 25mmx5mm cpper earth strip in 0.5Mtr below ground as strip earth electrode,including soldering as required. |
| 77 | S/L 8 SWG copper wire in ground (for main panel and AC panel) :- |
| 78 | S/L 8 SWG G.I. wire in ground :- Supplying and laying 8 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required. |
| 79 | G.I. Pipe for Cable protection:- |
| 80 | Providing , laying and fixing following dia GI pipe (medium Class) in ground complete with G.I.Fittings including trenching (75 cm deep) and refilling etc. as required. |
| 81 | 40 mm dia |
| 82 | 65 mm dia |
| 83 | SITC LED BOLLARD LIGHT RECTANGULAR SHAPE |
| 84 | SITC LED BOLLARD LIGHT CYLINDRICAL SHAPE |
| 85 | 30 WATT LED Flood Light |
| 86 | 50/60 WATT LED Flood Light |
| 87 | External Plumbing Works |
| 88 | Providing and fixing brass/C.I. stop cock of approved quality all complete as per specification and direction of E/I. |
| 89 | 15 mm dia |
| 90 | Providing and fixing G.M. non return valve Horizontal/Vertical type of approved quality as per specification and direction of E/I. |
| 91 | 25 mm dia |
| 92 | 32 mm dia |
| 93 | Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600 x 450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 x 475mm G.I. Cover with frame (weight not leaa than 36 kg) alongwith earth work in exacavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I. |
| 94 | Supplying NP2 R.C.C. hume pipe with colour as work site as per direction of E/I.150mm dia |
| 95 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 96 | 75 mm diameter |
| 97 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 98 | Single tee without door - 75x75x75 mm |
| 99 | Single tee without door - 110x110x110 mm |
| 100 | 75 mm bend |
| 101 | 110 mm bend |
| 102 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall |
| 103 | 25 mm nominal outer dia Pipes |
| 104 | 32 mm nominal outer dia Pipes |
| 105 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. |
| 106 | 15 mm nominal outer dia Pipes |
| 107 | 20 mm nominal outer dia Pipes |
| 108 | Dismantling Works |
| 109 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 110 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 111 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concree, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with allk lifts and lead of 1000 metres (For dismembering existing high mast) |
| 112 | Steel work in all types of sections upto a height of 5m above plinth level excluding cutting of rivet. |
| 113 | Including dismembring |
| 114 | Carriage of Material |
| 115 | Aggregate |
| 116 | Brick |
| 117 | Operation and Maintenance for 5 years |
| 118 | Add GST 18 % |
| 119 | Add Labour cess 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender