Tender For Providing Water Supply In Village Fuchonagri Tola Khas Panchayat Nagri Block Dumri With 1 H.P. Solar Motor Pump Complete Set With 120 Mtr Bore Well Under Drinking Water And Sanitation Division 02 Giridih.
Tender Value
8.79 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
5 days left
EMD
18000
Bank guarantee accepted
Document Fee
1250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Giridih → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Water Supply In Village Fuchonagri Tola Khas Panchayat Nagri Block Dumri With 1 H.P. Solar Motor Pump Complete Set With 120 Mtr Bore Well Under Drinking Water And Sanitation Division 02 Giridih.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches in ordinary soil and disposal of excavated earth as obtained to a distance up to 50.0m ,including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design ,building specification and direction of E/I |
| 2 | Providing clean coarse sand in filling in foundation trenches and/ or in plinth including ramming and watering in layers not exceeding 150 mm. thick with all leads & lifts including cost of all materials labours, royalty and taxes all complete as per building specification and direction of E/I. |
| 3 | Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 Coarse sand (zone - III) : 8 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (1 Cement : 1.5 Coarse sand (zone - III) : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string course, fillets, columns, pillars, abutment, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement.1:1.5:3 (1 Cement : 1.5 Coarse sand (zone - III) : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Providing Tor steel reinforcement of 8 mm dia rods as per approved design and drawing including carriage of M.S. bars to work site,cutting bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only valid for Tata (Tiscon), SAIL, JSPL Electrosteel steels Ltd. Bokaro and Vizag {RINL}). |
| 8 | Carriage of materials. i) Bricks (lead 40 km ) |
| 9 | ii) Cement (lead 40 km ) |
| 10 | iii) steel (lead 40 km ) |
| 11 | iv) Sand (lead 15 km ) |
| 12 | v) Stone Chips (lead 40 km ) |
| 13 | Providing structural steel galvanised tubular hollow section work in trusses, other similar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge ,including cutting fabricating ,hoisting , erecting and fixing in position, making riveted/bolted /welded connections and one coat of anticorrosive paint and over it two coat of all oil painting & For Structure(PLUS) Providing and applying materials &labour for hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (Net wt. of components to be Galv) preferably TATA structural section etc complete. |
| 14 | Providing structural steel work in trusses other similar trussed purlins and members with bracing gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge including cutting fabricating hoisting erecting and fixing in position making reverted bolted welded connections one coat of anticorrosive paint and over it two coats of oil painting etc complete (MJP 2019-2020 Sec F Item 6) |
| 15 | Materials and labour for vinyl painting of matter given by department in different color (As per Market Rate) |
| 16 | Providing and fixing HDPE container Syntex or alike one piecemolded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 5000.00 litres Capacity Water storage Tank.(DWSD Item No.- 01 M) |
| 17 | Transportation Charge. |
| 18 | Lifting of 5000 Litrs Capacity Tank up to 6.0 m height with lifting tools with rope and labour. |
| 19 | Making hole in Tank. |
| 20 | Making long screw in 32 MM G.I. pipe including supplying and fitting jam nuts and extra socket etc. |
| 21 | Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories. Solar submersible motor pump (SPV DC Type) i) 1 HP (DC Pump) with 900 wp minimum watt P.V. Panel as MNRE pump head Max Shut-off head up to 120 mtrs. For higher or lower head or in between various modules output could be decided on prorates basis. (As per latest guide line of MNRE) |
| 22 | Carrying out recuperation/Yield Test for ascertaining the discharge of constructed well/ excavated profile as directed by the IEC. The test out by the drawing down water from the well/ profile below normal/subsoil water level up to full depth rise is recorded the normal water level/subsoil water level in the well / profile as well as strainer/level at pump as per design of W.S. scheme shall be recorded prior to the test including cost of all materials, over Load , Labours etc. complete as directed. |
| 23 | Supplying all labours, tools and equipments for dismantling of head & water tank assembly and taking out 32 mm dia old G.I. Pipe, connecting rod, cylinder assembly the dismantled components after necessary changing for making the T/W in good condition with all transportation including unused taken out materials back in store all complete job as per direction of E/I.(As per Model Estimate of Solar Energy based Mini WSS. TS done by SE, Ranchi Circle & Circle Gumla dt. 21.05.2019) |
| 24 | Provision of solar night lamp. |
| 25 | Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I. |
| 26 | Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete |
| 27 | Providing PCC M-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing , taxes and royalty all complete as per specification and direction of E/I. for construction of road cutting portion- |
| 28 | Rising Main Manufacture, supply and Delivery of following Nominal dia UPVC column pipes including PVC socket (Coupler), 65mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 3Mtrs.Rising main |
| 29 | 50 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall Thickness End:9 .8 mm to 11.9mm, Barrel 7.3mm to 9 mm, Length: 3Mtrs. Delivery Pipe |
| 30 | Distribution Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10 (Item No-112M 1028) 63 mm HDPE Pipe- |
| 31 | 50 mm HDPE Pipe- |
| 32 | 32 mm HDPE Pipe- |
| 33 | 20 mm HDPE Pipe- |
| 34 | Providing and fixing Gun Metal Gate valve with C I wheel of approved quality(screwed end) 50 mm dia . |
| 35 | 65mm dia |
| 36 | Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10 |
| 37 | Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. MJP 19-20 sec-I-IX sl no -2(i) 50 mm HDPE Pipe- |
| 38 | 65 mm HDPE Pipe- |
| 39 | Distribution 65 mm HDPE Pipe- |
| 40 | 50 mm HDPE Pipe- |
| 41 | 32 mm HDPE Pipe- |
| 42 | 20 mm HDPE Pipe- |
| 43 | 15 MM dia G.I. Pipe |
| 44 | Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge. |
| 45 | Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I. (1) Elbow (a) 15 mm dia. |
| 46 | (2) Reducer Socket - (a) 20 x 15 mm dia. |
| 47 | (3) Nipple - (a) 15 mm dia. |
| 48 | (4) Plain Socket - (a) 15 mm dia. |
| 49 | Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram. |
| 50 | Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I. 50 mm dia and weight not less than 1.5 Kg. |
| 51 | 65 mm dia Full way valve |
| 52 | Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I. 15 dia and weight not less than 400 Gm |
| 53 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design.With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. |
| 54 | Supplying materials , labours and equipment's for construction of 0.90 M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including 12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I. 1.20 M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform - |
| 55 | Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job |
| 56 | Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge. |
| 57 | Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. (As per old model estimate) |
| 58 | Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I. Cement Lead 10 Km (avg.) |
| 59 | Sand Lead 36 Km (avg.) |
| 60 | Stone Chips Lead 11 Km (avg.) |
| 61 | Drilling (a) Up to 30mtr. Depth bellow G.L. in Rural Areas |
| 62 | (b) Beyond 30mtr. In Rural Areas |
| 63 | Lowering 125mm dia blue UPVC Casing pipe |
| 64 | Grouting to Casing Pipe |
| 65 | flushing and development of drilled tube well |
| 66 | 125 mm dia GI/CI cap 125 mm dia T/W |
| 67 | Lowering 32 mm dia G.I. (Medium) pipe in DT in 3 mtr. Length |
| 68 | fitting and fixing deep well cylinder |
| 69 | fitting and fixing of India Mark II Hand Pump with |
| 70 | constructing PCC (1:2:4) circular platform |
| 71 | constructing PCC (1:2:4) drain |
| 72 | painting, numbering and year for construction of T/Well and taking of colour photograph |
| 73 | India mark-II, I.S.I. 15500 (Part 2) / 2004 |
| 74 | Cost of 32 mm dia GI pipe (Medium) 3 Mtrs long |
| 75 | Cost of 125 mm dia blue UPVC Casing Pipe |
| 76 | 18% GST |
| 77 | Labour cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender