Tender For Operation, Maintenance And Providing Civil & Electrical Maintenance (Including Facility Management Services) For Office And Residential Complex At Jayant Area
Tender Value
2.24 Crore
Estimated cost
Bid Submission
08 Aug 2026
12 days left
EMD
2.81 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Singrauli → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Operation, Maintenance And Providing Civil & Electrical Maintenance (Including Facility Management Services) For Office And Residential Complex At Jayant Area
BOQ
| Sl. No. | Item Description |
| 1 | Item Description/ Heading |
| 2 | Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m: All kinds of soil |
| 3 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 4 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 5 | Earth work in excavation by mechanical means Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. |
| 6 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. |
| 7 | Carriage of material by Mechanical Transport including loading, unloading and stacking Earth Lead - 2 Km |
| 8 | Carriage of material by mechanical transport etc: Lime, moorum, building rubbish etc: Lead upto 1.00 km |
| 9 | Carriage of material by mechanical transport including loading, unloading and stacking. Earth lead 1 km |
| 10 | Cleaning of surface drain including disposal of muck sludge through trolley or other arrangements to a specified place (in no case it shall be kept on drain banks) within a lead of 1 KM complete with all tools & tackles as per instruction of EIC. Upto 300 mm wide |
| 11 | Cleaning of surface drain including disposal of muck sludge through trolley or other arrangements to a specified place (in no case it shall be kept on drain banks) within a lead of 1 KM complete with all tools & tackles as per instruction of EIC. Above 300 and upto 600 mm wide |
| 12 | Cleaning of surface drain including disposal of muck sludge through trolley or other arrangements to a specified place (in no case it shall be kept on drain banks) within a lead of 1 KM complete with all tools & tackles as per instruction of EIC. Above 600 mm wide |
| 13 | Cleaning of toilet (Floor area upto 10 Sqm.) including cleaning of dado, skirting, WC pan (Indian type/western type), wash basins, urinals, glass shelves, mirror and other fittings, if any, for ‘D’ type or equivalent Qtrs. including any other wash basin outside the toilet by hand dusting and cleaning with soap solution, acids, deodorants, phenyl etc. to make the toilet clean &hygienic all complete with tools, tackles & consumables as per instruction of Engineer-in-charge. |
| 14 | Cleaning of toilet (Floor area upto 08 Sqm.) including cleaning of dado, skirting, WC pan (Indian type/western type), wash basins, urinals, glass shelves, mirror and other fittings, if any, for ‘C’ type or equivalent Qtrs. including any other wash basin outside the toilet by hand dusting and cleaning with soap solution, acids, deodorants, phenyl etc. to make the toilet clean & hygienic all complete with tools, tackles & consumables as per instruction of Engineer-in-charge. |
| 15 | Cleaning of toilet including WC pan, wash basin, other fittings if any for B & lower type quarters by hand dusting and cleaning with soap solution, acid, phenyl to make the toilet clean and hygienic all complete with consumable tool and tackles as per instruction of EIC. |
| 16 | Brooming& cleaning of all roads in colony and within the premises of service buildings and other places as required with all tools & tackles and stacking the garbage at specified place as per instruction of EIC. |
| 17 | Cleaning of all types of roof including removal of dry leaves, weedings and clearing drain holes, brooming etc. all complete with tools & tackles and stacking the garbage place as per instruction of EIC. |
| 18 | Disposal of dead animal including transportation to the specified place, making earth pit, disposal of dead animal into pit with adequate quantity of salt, lime and bleaching powder etc. and refilling the pit with earth all complete tools, tackles and consumables as per instruction of EIC. ( A ) Big Animal (Cow, Buffalo, Ox and the like) |
| 19 | Disposal of dead animal including transportation to the specified place, making earth pit, disposal of dead animal into pit with adequate quantity of salt, lime and bleaching powder etc. and refilling the pit with earth all complete tools, tackles and consumables as per instruction of EIC. ( B ) Small Animal (Dog, Cat, Fox, Pig and the like) |
| 20 | Collection of garbage from door to door and disposal of the same through trolley or other suitable arrangement to the specified place within a lead of 1 KM including sweeping of stair case (for 1st and 2nd floor qtrs.) with all tools and tackles complete, as per instruction of EIC. ( A ) Ground floor |
| 21 | Collection of garbage from door to door and disposal of the same through trolley or other suitable arrangement to the specified place within a lead of 1 KM including sweeping of stair case (for 1st and 2nd floor qtrs.) with all tools and tackles complete, as per instruction of EIC. ( B ) 1st floor |
| 22 | Collection of garbage from door to door and disposal of the same through trolley or other suitable arrangement to the specified place within a lead of 1 KM including sweeping of stair case (for 1st and 2nd floor qtrs.) with all tools and tackles complete, as per instruction of EIC. ( c ) 2nd floor |
| 23 | Removing and uprooting of unwanted vegetation grown over the drainage pipes, walls, chajjas, balcony and similar location of building up to floor V level with all tools and plants required with safety precautions and making good the same with plaster as per instruction of EIC including disposal of material/tree roots etc. at the required place all complete. |
| 24 | Cleaning, mopping & washing of floor of public buildings other places neatly with detergents, bleaching power etc. all complete with tools, tackles and consumable to make the floor clean & hygienic as per instruction of EIC. |
| 25 | Cleaning of general/common toilet including cleaning of WC pan (Indian/European type) wash basin, urinals by hand dusting and cleaning with soap solution, acids, deodorants, phenyl etc. to make the toilet clean and hygienic and providing naphthalene balls in urinals complete with all tools, tackles & consumables as per instruction of EIC. |
| 26 | Cleaning of bathrooms/ toilet with attached with hostel rooms, office chambers etc. including cleaning of floors, skirting & dado, WC pan(India/European type),wash basin, shelves, mirror and other fittings, if any, by hand dusting and cleaning with soap solution, acids, deodorants, phenyl etc. to make the toilet clean and hygienic and providing naphthalene balls in urinals complete with all tools, tackles & consumables as per instruction of EIC (for community & service building) |
| 27 | Cleaning of door shutters, window shutters including chowkhats, window grills, glass panes, cobwebs etc. of service/community buildings with necessary detergents, chemical etc. complete as per instruction of EIC. |
| 28 | Cleaning of Inspection chamber of all sizes and disposal of sludge etc. all specified place outside the colony with all leads including removal & replacing of top cover, mending the damages of cover and chamber, if any etc. as per instruction of EIC. |
| 29 | Cleaning of sludge line and traps (Kitchen & toilets) of all diameters at different floors including opening of joints, cleaning of pipe line and again jointing & flushing with fresh water all complete with tools and tackles as per instruction of EIC. |
| 30 | Cleaning of septic tank of 20 user’s capacity with tools and tackles including disposal of sludge material outside the periphery of colony with all leads at a specified place complete as per instruction of EIC. |
| 31 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for leads upto 10 km including all lifts involved. |
| 32 | Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 33 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 34 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work |
| 35 | Providing round the clock security guard without gun for watch & ward of government premises and all belongings by deploying neatly dressed security guards in 8 hours shift including necessary T&P like torch, lathi and unifrom etc. complete as per instruction of EIC. |
| 36 | Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. Lead complete (earth measured in stacks will be reduced by 20% for payment). |
| 37 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 k.m. lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm |
| 38 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 39 | Providing and Displaying plants Dahlia double kenya variety in different colour well developed with 3 to 4 flowers in half bloom, good foliage stacked with Green painted Bamboo sticks, 45 to 60 cm height in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 40 | Providing and Displaying plants Dahlia single in different colour with fresh & healthy foliage well developed with 6 to 8 half blooming buds in 20 cm. Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 41 | Providing and Displaying plants Daisy well developed with fresh & healthy foliage in full bloom in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 42 | Providing and Displaying plants Dianthus dwarf in different colour fresh & healthy bloom in 20 cm Earthen Pot/Plastic Pot and as per direction of theofficer-in-charge. |
| 43 | Providing and Displaying plants Gazania hybrid in different colour well developed with fresh & healthy foliage with full bloom in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 44 | Providing and Displaying plants Marigold jaffri dwarf in different colour well developed with fresh & healthy foliage with 12 to 15 flowers in full bloom specimen plant 23 to 30 cm ht. in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 45 | Providing and Displaying plants Marigold(Tagetes) inca hybrid different colour having 30 cm and above ht., with 6 to 8 flowers in bloom & blooming condition, well developed pot should be fully covered with fresh and healthy, foliage and flowers in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 46 | Providing and Displaying plants Chrysenthemum double variety, well developed, having 45 to 60 cm ht., with 6 and above flowers with half blooming condition, fresh and healthy with bamboo stacking in 25 cm Earthen Pot and as per direction of the officer-in-charge. |
| 47 | Providing and Displaying plants Pansy Hybrid Sakata well developed with fresh & healthy foliage with 3 to 4 flower in bloom in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 48 | Providing and Displaying plants Petunia hybrid different colour single well developed in full bloom in 20 cm Earthen/Plastic Pot and as per directionof the officer-in-charge. |
| 49 | Providing and Displaying plants Salvia red Hybrid dwarf variety having 15 cm to 23 cm ht., well developed with fresh & healthy foliage in bloom in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 50 | Providing and Displaying plants Verbina in different colour having 30 to 45cm ht., well developed with fresh & healthy foliage in bloom condition in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 51 | Providing and Displaying plants Creeper Rose variety 3 to 4 healthy branch 60 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge. |
| 52 | Providing and displaying of Croton Golden plant, having ht. 45 cm to 60 cm with 2 to 3 branches, well developed, fresh and healthy foliage in 25 cm size of Earthen pot / Plastic pot as per direction of the officer-in-charge. |
| 53 | Providing and displaying of Croton Duck foot (Elite) plant, having ht. 45 cm and above with 3 to 4 branches, well developed, fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot. & as per direction of the officer-in- charge. |
| 54 | Providing and Displaying Acalypha twisted plant well developed with fresh & healthy 30 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge. |
| 55 | Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. |
| 56 | Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy plant in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 57 | Providing and Displaying Furcaira variegated plant well developed with fresh & healthy foliage 8 to 10 leaves in 30 cm Earthen Pot as per direction of the officer-in-charge. |
| 58 | Providing and displaying of Aglaonema Snow-White hybrid plant (three in one), having ht. 30 cm & above with 6 to 8 leaves, bright colour, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot . (Specimen Plant) & as per direction of the officer-in-charge. |
| 59 | Providing and Displaying Cyprus Golden plant 30 to 45 cm ht. well developed good Golden colour foliage, Conial Shape in 25 cm Earthen Pots as per direction of the officer-in-charge. |
| 60 | Providing and displaying of Araucaria cookie plant, having ht. 60 cm to 75 cm, straight, well developed, fresh and healthy with lush green leaves frombottom to top in 20 cm size of Earthen pot / Plastic pot. & as per direction of the officer-in-charge. |
| 61 | Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth |
| 62 | Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 60 cm girth upto and including 120 cm girth |
| 63 | Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 120 cm girth upto and including 240 cm girth |
| 64 | Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Above 240 cm girth |
| 65 | Maintenance of potted plants in Cement pots at ground floor in flats and ground floor bungalow, office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required ( Materials provided by the department) as per direction of officer in charge. (For of cement pots 300 Nos) |
| 66 | Maintenance of potted plants in Earthen pots in displayed at multi storied office buildings, flats and ground floor bungalow, office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required ( Materials provided by the department) as per direction of officer in charge.(For Earthen pot 750 Nos) |
| 67 | Maintenance of Potted Plants at Nursery in Earthen pot including resetting/displaying at Nursery, including watering, weeding, hoeing, colouring,transplanting the damaged pots and disposal of generated garbage at specified place as per direction of officer-in-charge. (Good earth, manure, fertilizer, insecticide & pesticide shall be provided by the department) per pot (For Earthern pot 3000 Nos) |
| 68 | Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge. Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm |
| 69 | Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on appropriate place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid separately.) Size of Empty Pots 35cm Top dia, 25cm Bottom Dia & 35cm Perpendicular height. |
| 70 | Colour washing such as green, blue or buff to give an even shade : New work (two or more coats) with a base coat of white washing with lime |
| 71 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 72 | Complete maintenance of the entire garden features having as per yardstick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gapfilling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide ,Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.) Play grounds/ Public parks (as per yard stick 1 Mali= 2.00 Acre) |
| 73 | Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.) MPs accommodation and Govt. officers bungalows. (as per yard stick 1Mali =1.55Acre) |
| 74 | Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.) Permanent office accommodation. (as per yard stick 1Mali =1.25Acre) |
| 75 | Topairy cutting/shapping of plant removing of cut materials, cleaning, hoeing of plants complete design hoeing of trees (Topairy) watering manure etc.(excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge as per direction of officer in charge. Height of Topairy above 120cm. |
| 76 | Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 60 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (The manure/sludge shall be paid for separately). |
| 77 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge |
| 78 | Supplying & Stacking of Selection No.1 Grass at site fresh & free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge. |
| 79 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). |
| 80 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Antirrhinum dwarf |
| 81 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Aster dwarf |
| 82 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Calendula double |
| 83 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Carnation (double) Dutch |
| 84 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Carnation (double) Lilyput |
| 85 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Carnation hybrid |
| 86 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Chrysanthemum double |
| 87 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Cineraria |
| 88 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Cineraria dwarf hybrid |
| 89 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Clarkia hybrid |
| 90 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Cosmos hybrid |
| 91 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Dahlia double |
| 92 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Daisy hybrid |
| 93 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Dianthus hybrid |
| 94 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Gazania hybrid |
| 95 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Gerbera hybrid double |
| 96 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Marigold French Hybrid dwarf |
| 97 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Marigold inca hybrid |
| 98 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Nasturtium |
| 99 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Pansy Hybrid |
| 100 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Petunia hybrid |
| 101 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Phlox mix colour hybrid |
| 102 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Poppy double |
| 103 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Salvia |
| 104 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Salvia Hybrid different colour |
| 105 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Stock double |
| 106 | Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Verbena hybrid |
| 107 | Supply of different varieties of saplings and plants ; Rose (HIB) |
| 108 | Supplying different varieties of saplings and plants : Caroten (ordinary) |
| 109 | Supplying different varieties of saplings and plants : China palm |
| 110 | Supplying different varieties of saplings and plants : Arocarya (10 to 12 \\") |
| 111 | Supplying different varieties of saplings and plants : Rose |
| 112 | Supplying different varieties of saplings and plants : Fireball |
| 113 | Painting of flower pots, mosaic pots |
| 114 | Supplying of insecticides/ fungicides, pesticides and fertilizers from authorized dealer at site as per instruction of Engineer D.A.P. |
| 115 | Supplying of insecticides/ fungicides, pesticides and fertilizers from authorized dealer at site as per instruction of EngineerBone Meal |
| 116 | Supplying of insecticides/ fungicides, pesticides and fertilizers from authorized dealer at site as per instruction of EngineerUrea |
| 117 | Supplying of insecticides/ fungicides, pesticides and fertilizers from authorized dealer at site as per instruction of EngineerN. P. K. 12:32:36 |
| 118 | Supplying of insecticides/ fungicides, pesticides and fertilizers from authorized dealer at site as per instruction of EngineerRose Mixture |
| 119 | Supplying of insecticides/ fungicides, pesticides and fertilizers from authorized dealer at site as per instruction of EngineerNeem Cake |
| 120 | Supplying of insecticides/ fungicides, pesticides and fertilizers from authorized dealer at site as per instruction of EngineerMelathian |
| 121 | Supplying of insecticides/ fungicides, pesticides and fertilizers from authorized dealer at site as per instruction of EngineerRogers 30% |
| 122 | Supplying of insecticides/ fungicides, pesticides and fertilizers from authorized dealer at site as per instruction of EngineerSarso Khali |
| 123 | Disposal of garden waste material at appropriate location within 1 km lead from site including loading, unloading and transportation by tractor trolley or any other vehicle and also levelling the same at disposal place complete as per direction of EIC. |
| 124 | Supply at site good quality pots. Earthen Pots of 12\\" size |
| 125 | Planting different varities of sampling plants including earth pits, mixing of earth & manure (Cost of earth and manure shall be paid separately) etc. all complete with tools & plants as per instruction of EIC. On ground. |
| 126 | Planting different varities of sampling plants including earth pits, mixing of earth & manure (Cost of earth and manure shall be paid separately) etc. all complete with tools & plants as per instruction of EIC. On pots. |
| 127 | Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge. Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm |
| 128 | Operation/running of toy train by development of operator/ driver – 1 no. ,Helper - 1 no, mechanic/ fitter – ½ nos. daily and routine maintenance like oiling, greasing, required nut & bolt and maitenance of track etc. all complete including cast of diesel, lubricants etc.as required. The operation time will be 4 hour daily except Sunday and holidays. On Sunday & holidays operation time will be 8 hours. Any damages/losses will be the responsibility of the contractor and as per instruction of EIC. |
| 129 | Providing well-dressed security guards for safety of equipment’s, light fitting, plants, etc. of entire park by development of security guard (experienced) – 10 nos. daily as per instruction of the EIC. Any damages or losses or theft of park items will be received from the contractor or fulfilled by the contractor. |
| 130 | Operation of submersible pumps and fountain pumps situated at the park campus including regulating necessary valves for supply at water for irrigation/drinking purpose and maintenance of water supply pipeline, fittings like bib cock, stop cock, gate valves, cistern etc. by development of operator/valve man – 2 nos, plumber/fitter – 1/2 nos of daily as per instruction of EIC |
| 131 | Operation of PA system, sound system, electrical fitting like, garden ballads past top lanterns and other light fittings etc including maintenance of camera, PA system, electric wiring, light fitting, changing of bulbs/CFL etc as required. all complete by deployment of computer operator – 1 no., electrician – 1 no., helper – 1 no., as per instruction of the EIC. |
| 132 | Lifting the damage submersible pump and motor, cable etc. replacing it with working one and lowering the pump and motor assembly including cable in bore holes, dismantling the pipe during lifting and fixing the pipe during lowering with all materials and labour tools and plants etc. complete as per Instruction of engineer in charge. |
| 133 | Repairing of submersible Pump & motor with motor winding of submersible pump set including changing of oil seal rotor bush 'O'ring impellers ete. as required as per instruction of EIC with a gurantee period of 6 Months.From 5HP to 7.5 HP. |
| 134 | Operation of gym, basketball, tennis, volley ball & badminton by deployment of care taker/gym trainer – 1 no. including store keeping, issuing and taken back of sports materials as per instruction of the EIC. |
| 135 | Operation of meditation center by development of care taker – 1 no. including store keeping etc as per instruction of the EIC. |
| 136 | Regulating necessary controlling valves provided in the water supply pipeline network ensure required water supply to various quarters, service buildings, community buildings, welfare buildings, etc. situated in Jayant Township as per requirement and instruction of EIC. The supply of water is to be maintained in 3 shift of 8 hrs by deploying manpower as reuired including T&P etc. all complete. |
| 137 | Repairing of coupling by welding machining including opening & fitting labour T&P etc. complete. For DSM-4 |
| 138 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size). |
| 139 | Brick work with NON Modular Fly ash lime bricks(FALG Bricks) Confirming to IS:12894,of class designation 7.5Average Compressive strength etc complete in all respect in in foundation and plinth in :Cement mortar 1:6 (1 cement : 6 coarse sand)Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 140 | Brickwork with Non Modular Flyash bricks( FALG Bricks) conforming to IS:12894, of class designation 7.5 average compressive strength etc complete in all respect in superstructure above plinth level upto floor V level : In cement mortar 1:6 (1 cement: 6 sand) |
| 141 | Half Brickwork with Non Modular Flyash bricks( FALG Bricks) conforming to IS:12894, of class designation 7.5 average compressive strength etc complete in all respect in foundation and plinth : In cement mortar 1:4 (1 cement : 4 coarse sand) |
| 142 | Half Brickwork with Non Modular Flyash bricks( FALG Bricks) conforming to IS:12894, of class designation 7.5 average compressive strength etc complete in all respect in superstructure above plinth level upto floor V level : In Cement mortar 1:4 (1 cement :4 coarse sand) |
| 143 | Providing and fixing bolts including nuts and washers complete. |
| 144 | Welding by gas or electric plant including transportation of plant at site etc. complete. |
| 145 | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) |
| 146 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 147 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) |
| 148 | Neat cement punning. |
| 149 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge. |
| 150 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes within 50 metres lead as per direction of Engineer- in-Charge. (a) Internal Work - Exposed on wall |
| 151 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 152 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 153 | Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, angles, tees and flats |
| 154 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore |
| 155 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : Above 40 mm nominal bore |
| 156 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 157 | Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres Up to 150 mm diameter |
| 158 | Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres Above 150 mm diameter |
| 159 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 160 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 161 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 162 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White |
| 163 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush) capacity-white |
| 164 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :White solid plastic seat with lid |
| 165 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. |
| 166 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450 mm |
| 167 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 550x400 mm |
| 168 | Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 mm |
| 169 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Semi rigid pipe 32 mm dia |
| 170 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Semi rigid pipe 40 mm dia |
| 171 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 32 mm dia |
| 172 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 40 mm dia |
| 173 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 174 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms |
| 175 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms |
| 176 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
| 177 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 178 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 179 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL 15 mm nominal outer dia Pipes |
| 180 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL 20 mm nominal outer dia Pipes |
| 181 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL 25 mm nominal outer dia Pipes |
| 182 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL 40 mm nominal outer dia Pipes |
| 183 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL 50 mm nominal outer dia Pipes |
| 184 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK 40 mm nominal outer dia Pipes |
| 185 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK 50 mm nominal outer dia Pipes |
| 186 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL 15 mm dia nominal bore |
| 187 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL 20 mm dia nominal bore |
| 188 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL 25 mm dia nominal bore |
| 189 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore |
| 190 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 20 mm dia nominal bore |
| 191 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15 mm dia nominal bore |
| 192 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia nominal bore |
| 193 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia nominal bore |
| 194 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 40 mm dia nominal bore |
| 195 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50 mm dia nominal bore |
| 196 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 80 mm dia nominal bore |
| 197 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 198 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 50 to 80 mm nominal bore |
| 199 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore |
| 200 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore |
| 201 | Providing and fixing brass stop cock of approved quality : 20 mm nominal bore |
| 202 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 203 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore |
| 204 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore |
| 205 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore |
| 206 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore |
| 207 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore |
| 208 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore |
| 209 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 20 mm nominal bore |
| 210 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 25 mm nominal bore |
| 211 | Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore |
| 212 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore |
| 213 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter |
| 214 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter |
| 215 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length |
| 216 | Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 :Up to 300 mm dia |
| 217 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : 100 mm dia pipe |
| 218 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : 150 mm dia pipe |
| 219 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm diameter Class II |
| 220 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 150 mm diameter Class II |
| 221 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore |
| 222 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 20 mm nominal bore |
| 223 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 25 mm nominal bore |
| 224 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 40 mm nominal bore |
| 225 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 50 mm nominal bore |
| 226 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore |
| 227 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 20 mm nominal bore |
| 228 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 25 mm nominal bore |
| 229 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 40 mm nominal bore |
| 230 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 50 mm nominal bore |
| 231 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 80 mm nominal bore |
| 232 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Circular tank |
| 233 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore |
| 234 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore |
| 235 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15mm nominal bore |
| 236 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore |
| 237 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 238 | Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 239 | Providing and fixing PTMT stop cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 240 | Providing and fixing PTMT stop cock of approved quality and colour Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gms |
| 241 | Providing and fixing PTMT pillar cock of approved quality and colour 15 mm nominal bore, 107 mm long, weighing not less than 110 gms |
| 242 | Providing and fixing PTMT pillar cock of approved quality and colour 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms |
| 243 | Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 80 mm long, weighing not less than 46 gms |
| 244 | Providing and fixing PTMT grating of approved quality and colour. Circular type125 mm nominal dia with 25 mm waste hole |
| 245 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.15 mm nominal bore, 105 mm long, weighing not less than 138 gms |
| 246 | Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba. |
| 247 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour 25mm nominal bore, weighing not less than 62 gm |
| 248 | Providing and fixing of pillar cock for wash basin |
| 249 | Supply of G.I. Fittings SOCKET 15 mm dia |
| 250 | Supply of G.I. Fittings SOCKET 20 mm dia |
| 251 | Supply of G.I. Fittings SOCKET 25 mm dia |
| 252 | Supply of G.I. Fittings SOCKET 40 mm dia |
| 253 | Supply of G.I. Fittings PLUG GI 15 mm dia |
| 254 | Supply of G.I. Fittings PLUG GI 20 mm dia |
| 255 | Supply of G.I. Fittings PLUG GI 25 mm dia |
| 256 | Supply of G.I. Fittings PLUG GI 40 mm dia |
| 257 | Supply of G.I. Fittings ELBOW GI 15 mm dia |
| 258 | Supply of G.I. Fittings ELBOW GI 20 mm dia |
| 259 | Supply of G.I. Fittings ELBOW GI 25 mm dia |
| 260 | Supply of G.I. Fittings ELBOW GI 40 mm dia |
| 261 | Supply of G.I. Fittings ELBOW GI 50 mm dia |
| 262 | Supply of G.I. Fittings TEE GI 15 mm dia |
| 263 | Supply of G.I. Fittings TEE GI 20 mm dia |
| 264 | Supply of G.I. Fittings TEE GI 25 mm dia |
| 265 | Supply of G.I. Fittings NIPPLE GI 15 mm dia |
| 266 | Supply of G.I. Fittings NIPPLE GI 20 mm dia |
| 267 | Supply of G.I. Fittings NIPPLE GI 25 mm dia |
| 268 | Supply of G.I. Fittings NIPPLE GI 40 mm dia |
| 269 | Supply of G.I. Fittings NIPPLE GI 50 mm dia |
| 270 | Supply of G.I. Fittings SOCKET 50 mm dia |
| 271 | Supply of G.I. Fittings PLUG 50 mm dia |
| 272 | Supply of G.I. Fittings PLUG 80 mm dia |
| 273 | Supply of G.I. Fittings Supply of reducer socket 20x15 mm dia |
| 274 | Supply of G.I. Fittings Supply of reducer socket 25x20 mm dia |
| 275 | Supply of G.I. Fittings Supply of reducer socket 25x15 mm dia |
| 276 | Supply of G.I. Fittings Supply of reducer socket 40x25 mm dia |
| 277 | Supply of G.I. Fittings Supply of reducer socket 50x25 mm dia |
| 278 | Supply of bib cock washer up to 20 mm size (One PKT) containing 100 nos. of washer |
| 279 | Providing & fixing CI Sluice valve 50 mm dia |
| 280 | Providing & fixing CI Sluice valve 80 mm dia |
| 281 | Relaying of old G.I. pipe line 15 mm dia |
| 282 | Relaying of old G.I. pipe line 20 mm dia |
| 283 | Relaying of old G.I. pipe line 25 mm dia |
| 284 | Relaying of old G.I. pipe line 40 mm dia |
| 285 | Relaying of old G.I. pipe line 50 mm dia |
| 286 | Relaying of old G.I. pipe line 80 mm dia |
| 287 | Relaying of old G.I. pipe line 100 mm dia |
| 288 | Supply of rubber gasket & standard quality |
| 289 | Providing and fixing MS spindle with check nut in sluice valve Up to 80 mm |
| 290 | Providing and fixing MS spindle with check nut in sluice valve 100 mm |
| 291 | Providing and fixing MS spindle with check nut in sluice valve 150 mm |
| 292 | Supply of gland dori (6 to 20mm) of approved quality |
| 293 | Opening, repairing & refixing of double flange CI sluice valve as per instruction |
| 294 | Providing and fixing PVC bib cock |
| 295 | Supply of G.I. flange 50 mm dia |
| 296 | Supply of G.I. flange 80 mm dia |
| 297 | Supply of G.I. flange 100 mm dia |
| 298 | Supply of G.I. flange 150 mm dia |
| 299 | Cleaning of roof top water tank, including draining out water, cleaning, disinfecting the tank by bleaching powder etc. and washing the tanks with fresh water, writing of cleaning date with paint on the outer face of the tank all complete with tools, tackles and consumables as per instruction of EIC. |
| 300 | Providing and fixing PVC water tank cover |
| 301 | Repairing of sluice valve spindle by breezing proper machinery as per instruction of EIC : 50mm to 80mm size |
| 302 | Repairing of sluice valve spindle by breezing proper machinery as per instruction of EIC: 100mm to 125mm size |
| 303 | Repairing of sluice valve spindle by breezing proper machinery as per instruction of EIC : 150mm and above size |
| 304 | Handle and Lever for low level cistern |
| 305 | Steel Jalli |
| 306 | Providing G.I.pipe (medium quality) : 100mm dia size |
| 307 | Providing G.I.pipe (medium quality) : 150mm dia size |
| 308 | Providing & coupling bush of approved quality as per instruction of EIC. |
| 309 | Providing & coupling bolt of standard quality as per instruction of EIC |
| 310 | Providing GI tee 80mm size standard quality as per instruction of EIC. |
| 311 | Providing G.I.bend approved quality as per inst. Of EIC. : 50mm dia size |
| 312 | Providing G.I.bend approved quality as per inst. Of EIC : 80mm dia size |
| 313 | Providing G.I.bend approved quality as per inst. Of EIC. : 100mm dia size |
| 314 | Repairing of Sluice valve including replacement of all material such as MS Spindle with chucknut,ruber insertion/packing nut bolts after dismantling the valve and refitting the same in position as per instruction of EIC. : 50mm dia size |
| 315 | Repairing of Sluice valve including replacement of all material such as MS Spindle with chucknut,ruber insertion/packing nut bolts after dismantling the valve and refitting the same in position as per instruction of EIC. : 80mm dia size |
| 316 | Providing and fixing C.P. brass Hand shower(Health Faucet) with 8mm dia 1.20M Long Flexible tube & wall hook Model ALD-573 of Jaguar make. |
| 317 | Providing and fixing white vitreous china extended floor mounting water closet (Italian collection)of Hindware (Cat: 92532 (S-30) of size 68x37x76 CM (Size as per manufacturer's specification) shape , including seat cover, and cistern fittings, nuts, bolts and gasket etc complete |
| 318 | Providing and fixing C.P. brass angle valve of Jaguar or other approved make (Jaguar Cat.No.FLR-5053N) for basin mixer and geyser points of approved quality 15 mm nominal bore. |
| 319 | Providing and fixing C.P. brass Towel rail(Single 600MM) of Jaguar or other approved make (Jaguar Cat.No.ACN-1111SM)make of approved quality. |
| 320 | Providing and fixing white vitreous china round or square type wash basinof Cera or other approved make Cera Cat.No.52020103 Cafe 600X400 mm to be provided on granite top stone including making all connections but excluding the cost of fittings.(granite and other fitting to be paid separately) |
| 321 | Providing and fixing Towel ring of Jaguar or other approved makemake of approved quality (Cat No.ACN-1121BN) |
| 322 | Providing and fixing Glass Self of Jaguar or othe approved make (Jaguar Cat.NO.ACN1171N) 6000MM long of approved quality |
| 323 | Providing and fixing C.P. brass pillar cock of Jaguar or other approved make (Cat.No.FUS-29001) for wash basin of approved quality 15 mm nominal bore. |
| 324 | Providing and fiting of GI Pipe 50 mm dia heavy quality |
| 325 | Providing GI Socket 50MM dia size long thread of heavy duty |
| 326 | Providing Flange of heavy duty : 50MM Dia |
| 327 | Providing Flange of heavy duty : 80MM Dia |
| 328 | Operational of Submersible Pump (5 No.) at different location inside colony area(Minimum 1 No. Semi-skilled Labor). |
| 329 | Supplying of Submersible cable of ISI Marked and approved quality of 4/6sq.mm as per instruction of EIC |
| 330 | Supply and installation of submersible pump set for bore well (Capacity 3000GPH) head 60M to 120M depending upan yeild H.P Commensurtaing to capacity and hoad as per instruction of E.I.C.(Rates include submersible pump, motor and starter of approved make & ISI Mark)) |
| 331 | Supply of rubber gasket of 80mm dia flange |
| 332 | Supply of Nut and Bolts |
| 333 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 334 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). |
| 335 | Providing liquid chlorine solution, sodium hypochlorite based formulated confirm to IS-11673:1992 Grade-I and 10500-1991 for treatment of potable water. |
| 336 | Anti Adult Measures : Residual spray of chemical deltamethrin (K-othrine or Approved equivalent) 2.5% flow inside hospital building & residential quarters etc. Frequency- once in 3 months |
| 337 | Thermal fogging - with chemicalDelthamethrine (King fog or Approved equivalent) 1.25 ULV mixed with diesel in the ratio 1:199 outdoor operation in colony and hospital building etc. Frequency Fortnightly |
| 338 | Anti-Larva Measure - By using HSD oil with Baytex-1000 or approved equivalent in the ratio of 1:400 as per instruction of EIC. Frequency - fortnightly |
| 339 | Supply of bleaching powder |
| 340 | Carriage of material by mechanical transport including loading and unloading of sludge- Lead upto 2 KM |
| 341 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings,bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) :3 graded stone aggregate 20 mm nominal size). |
| 342 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Cold twisted bars |
| 343 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe |
| 344 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter |
| 345 | Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 100 mm diameter |
| 346 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS - 1729 |
| 347 | Providing and fixing plain bend of required degree. 100 mm dia : Sand cast iron S&S as per IS : 3989 |
| 348 | Providing and fixing plain bend of required degree. 100 mm dia : Sand cast iron S&S as per IS - 1729 |
| 349 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade: Old work (one or more coats) |
| 350 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 351 | Re-lettering with black Japan paint of approved brand and manufacture. |
| 352 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood |
| 353 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 354 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 355 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws |
| 356 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 357 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 358 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 359 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 100x58x1.90 mm |
| 360 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 75x47x1.70 mm |
| 361 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm |
| 362 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm |
| 363 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 200x10 mm |
| 364 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm |
| 365 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150x10 mm |
| 366 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 100x10 mm |
| 367 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm |
| 368 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 100 mm |
| 369 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm |
| 370 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm |
| 371 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm |
| 372 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm |
| 373 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm |
| 374 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100x10 mm |
| 375 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in- charge Anodized (AC 15 ) aluminium |
| 376 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper |
| 377 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 378 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. |
| 379 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 380 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 381 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece |
| 382 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm |
| 383 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 5.5 mm |
| 384 | Renewal of old putty of glass panes (length) |
| 385 | Refixing old glass panes with putty and nails |
| 386 | Deduct for providing pin headed glass panes instead of ordinary float glass panes weighing 4 mm thick in doors, windows and clerestory windows shutters (Area of opening for glass panes excluding portion inside rebate shall be measured). |
| 387 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 388 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 389 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 390 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 391 | Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end in pelmets as curtain rod. |
| 392 | Providing and fixing teak wood lipping of size 25x3 mm in pelmet. |
| 393 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding |
| 394 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. |
| 395 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below |
| 396 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. Door chowkhats |
| 397 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. Window chowkhats |
| 398 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side |
| 399 | Polishing on wood work with ready made wax polish of approved brand and manufacture : Old work |
| 400 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 401 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness |
| 402 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.00 mm thickness with weight not less than 12.50 kgpersqm |
| 403 | Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws. |
| 404 | Providing and fixing bright finished brass handles with screws etc. complete: 125 mm |
| 405 | Providing and fixing bright finished brass handles with screws etc. complete: 100 mm |
| 406 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) |
| 407 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With Hollock wood beading 62X19 mm |
| 408 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 409 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm |
| 410 | Providing and fixing aluminum U beading of required size to Pre-laminated/ flush door shutter, including fixing etc. complete as per direction of Engineer-in-charge. |
| 411 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
| 412 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 413 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 30 mm thick shutters. With ISI marked M.S. pressed butt hinges bright finished of required size. Kiln seasoned and chemically treated hollock wood |
| 414 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters With ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned and chemically treated hollock wood |
| 415 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading |
| 416 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Kiln seasoned and chemically treated hollock wood 30 mm thick shutters |
| 417 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Kiln seasoned and chemically treated hollock wood |
| 418 | Providing and fixing 12 mm thick ply for pelmet, drawer show case & cup board etc. all complete as per instruction of Engineer in charge. |
| 419 | Providing and fixing 19 mm thick ply wood in cup board shelves, partitions etc. all complete as per instruction of EIC. |
| 420 | Supply of 20 mm to 35mm thick hard wood planks batten for doors and windows shutter of required width etc. 2nd class hard wood. |
| 421 | Renewing by hard wood battened/ braced/ panelled shutter after changing batten/ braces/ style/ rails wherever necessary including opening, refixing etc. and required sestets nails etc. but excluding the cost of hard wood. |
| 422 | Providing and fixing M.S kundi for Aldrops in doors. |
| 423 | Providing and fixing handle in fully glazed steel windows. |
| 424 | Welding for pintel and locking arrangement in double leaf steel gate. |
| 425 | Providing and fixing 20 mm thick braced and battened door shutter for doors and windows including nuts, screws by ledges and braces (20 mm thick) including with all necessary screw by using hard wood as per instruction of Engineer in charge. |
| 426 | Supply C.P. Brass screw/staninless screw 25mm for cleat angle (one PKT equal to 100 nos ) |
| 427 | Supply of Neoprene/EPDM rubber gasket. |
| 428 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 429 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm |
| 430 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab upto 0.50 sqm |
| 431 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate |
| 432 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 433 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 434 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 435 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 436 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 437 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase |
| 438 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. : 75 mm diameter |
| 439 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. : 110 mm diameter |
| 440 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door75x75x75 mm |
| 441 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door110x110x110 mm |
| 442 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door75x75x75 mm |
| 443 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door110x110x110 mm |
| 444 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°75 mm bend |
| 445 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend |
| 446 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 75 mm Shoe |
| 447 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain)110 mm Shoe |
| 448 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm |
| 449 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm |
| 450 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
| 451 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 452 | White washing with lime to give an even shade : Old work (two or more coats) |
| 453 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : One or more coats on old work |
| 454 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 455 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 456 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 457 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet |
| 458 | Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x460 mm bowl depth 200 mm |
| 459 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm |
| 460 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 461 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 550x400 mm |
| 462 | Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design. |
| 463 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 464 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 465 | Providing and fixing toilet paper holder : C.P. brass |
| 466 | Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729 |
| 467 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 100 mm dia pipe |
| 468 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outletSand Cast Iron S&S as per IS: 1729 |
| 469 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 25mm thick with 12.50mm nominal size of stone aggregate. |
| 470 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 471 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 472 | Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board510x1040 mm bowl depth 250 mm |
| 473 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. : 10 litre capacity - White |
| 474 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 475 | 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer- in-charge. Non decorative finish (matt finish) |
| 476 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm |
| 477 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Long pattern W.C Pan of size 580x440 mm |
| 478 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 479 | Maintenance/Rectification of leakage/seepage through tank or WC pan or wash basin, kitchen sink trap room or through wall of 2nd floor to ground floor by cutting WC pan, opening of sewage line pipe as required including disposal of unserviceable material etc. and maintaining the damaged portion complete with flooring 1:2:4 cement concrete finishing with neat cement punning with CICO and plastering 1:3 cement mortar with CICO and neat cement punning and refixing WC pan by using cement mortar 1:3 (1 cement : 3 coarse sand) with CICO & spun yarn etc. all complete as per instruction of EIC complete including testing of leakage etc.Seepage due to WC pan along with CI pipeSeepage due to wash basinSeepage due to kitchen sink trapSeepage due to water tankSeepage due to bath room trap, balcony trap, etc. |
| 480 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type) |
| 481 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 482 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 483 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 484 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I |
| 485 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 486 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 487 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern |
| 488 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 489 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 490 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 491 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides |
| 492 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 493 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 494 | Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. |
| 495 | Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5k.m. lead complete (cattle manure measured in stacks will reduced by8% for Payment). |
| 496 | Supply and staking in position of lime etc complete as per instruction of EIC |
| 497 | Facility Manager for heading the entire facility team of Office and Residential Complex and Single point of contact & overall in charge of FM On-site Opera-tions and reporting to engineer-in-charge or his representative. |
| 498 | 04 nos. Asst. Facility Manager (Technical) for supporting Critical Services Operations & reporting to Facility Manager. |
| 499 | Small petty carpentary work such as small repair of doors, windows, making hole, fixing of miscellaneous fixtures etc. |
| 500 | Small petty water supply related works |
| 501 | Supplying and fixing following piano type switch on the existing switch box/ cover including connections etc. as required. (Make-RK lite,Anchor,Legrand,Havells or its equivalent ISI marked) 5/6 A switch |
| 502 | Supplying and fixing following piano type Socket on the existing switch box/ cover including connections etc. as required. (Make-RK lite,Anchor,Legrand,Havells or its equivalent ISI marked) 3 pin5/6 A socket |
| 503 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. (Make-RK lite,Anchor,Legrand,Havells or its equivalent ISI marked) 15/16 A switch |
| 504 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. (Make-RK lite, Anchor, Legrand, Havells or its equivalent ISI marked) 6 pin 15/16 A socket outlet |
| 505 | Supply and fixing of PVC Batten/ Angle Holder (Make-RK lite, Anchor, Legrand, Havells or its equivalent ISI marked) |
| 506 | Supply and fixing of Ceiling Rose on round block including connection |
| 507 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make- Standered, Legrand, Havells or its equivelent ISI marked) (16 amp/20 amp/ 32 amp) |
| 508 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 1 x 1.5 sq. mm |
| 509 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 2.5 sq. mm |
| 510 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 6 sq. mm |
| 511 | Supplying and fixing of following sizes of medium class PVC conduit/Casing Caping along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm |
| 512 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required |
| 513 | Providing and fixing of Wire Nails with Head |
| 514 | Providing and fixing of Insulation Tape. |
| 515 | Providing and installation of 63 amp SPN main switch with kit kat fuse assembely. ISI marked |
| 516 | Providing and installation of 32 amp SPN main switch with kit kat fuse assembely. ISI marked |
| 517 | Providing and Installation of Remort Call Bell Battery operated ISI marked |
| 518 | Providing and Installation of 2.5 mfd capacitor for Fan. |
| 519 | Providing and Installation of 5 step Electronics type Fan Regulator |
| 520 | Providing and Fixing of 100 mm x 75 mm x 50 mm complete switch board |
| 521 | Providing and Fixing of 210 mm x 135 mm x 50 mm complete switch board |
| 522 | Providing and Fixing of 210 mm x 210 mm x 50 mm complete switch board |
| 523 | Repairing, Servicing and maintenance of 1.5/2 Tn Split/Windows AC's, 1.5/2 Tn invertor/non invertor AC, 3/3.5 ton Tower AC, Water Cooler and refrigrator at Township are of Jayant Project as per requirement. With the help of 2 skill and 2 Semi skill manpower equiped tools and tackles as required. (827 x 2 + 693 x 2) |
| 524 | Rewinding of different type of motor for AC, water cooler, with replacement of bush/bearing/shaft etc as per requirement. |
| 525 | Shifting, Installation, Commissioning of 1.5/2 Tones split Ac, 3/3.5 Tn Tower AC with new felt, fresh gas, new copper pipe, \wire, ctc as per rcquircmcnt and direction and direction of EIC |
| 526 | Providing and replacement of defective compressor by Brand New 2Tonnes Rotary compressor with accumulator, for window/Split Acs, Suitable for 180-250V AC, 50HZ supply. Max, Make- Kirloskcr, Copland, carricr,Vo1tas, Godrej, Hitachi Blue star etc |
| 527 | Providing and replacement of defective compressor by Brand New 1.5 Tones Rotary compressor with accumulator, for Window/Split Acs ,Suitable for 180-250V AC, 50HZ supply, Max. , Make- Kirloskcr, Copland, carrier, Godrej, Hitachi, Blue star etc |
| 528 | Providing and replacement of Capacitor, 4mf +/-5%, 440,AC, 50HZ, 20C to 80C, As per IS2993, Make-Philips, Crompton, Capital, Jaivie or equivalent only. |
| 529 | Providing and replacement of Capacitor, 6mf +/-5%, 440V, AC, 50HZ, 20C to 80C, As per 1S2993. Make- Philips ,Crompton, Capital, Jaivic or equivalent only |
| 530 | Providing and replacement of Capacitor, 36 mf +/-5%, 440V, AC, 50HZ, 20C to 80C US As per lS2993, Make- Philips, Crompton, Capital, Jaivic or equivalent only |
| 531 | Providing and replacement of Capacitor 45mf+/-5%, 440V,AC, 50HZ, 20C to 80C AS per 1S2993, Make- Phi1ips, Crompton ,Capital, Jaivic or equivalent only |
| 532 | Providing and replacement of Capacitor, 60mf+/-5%, 440V,AC, 501lZ, 20C to 80C, As per IS2993,Makc- Philips, Crompton, Capital, Jaivic or equivalent only |
| 533 | Providing and replacement of Starting Relay suitable for 1.5/ l Tones ACs, 250 VAC 50HZ, supp1y, 20A, Max. as per IS scope of work terms & conditions Make- Danfass, Rental or equivalent only. |
| 534 | Providing and replacement of A.Cs fan blade/water cooler fan blade suitable for different type of Machine (with complete set) as per scope of work terms & conditions. |
| 535 | Providing and replacement of Filter with straincr and capillary for different type Window/split type ACs/ dcfrccze /watch cooler ctc |
| 536 | Providing and replacement of 66 N Capillary tube for AC |
| 537 | Providing and charging of R-22 Gas. R-32, R 410 |
| 538 | Providing and charging of R-134 Gas |
| 539 | Providing and replacement of Different type of screw (1/4\\", 1/2\\", 1/3\\" etc.) |
| 540 | Providing and connection of Thimble suitable for Acs connection |
| 541 | Welding/brazing Rod |
| 542 | Supply and installation of tap with assembly with bib cock for different make of water cooler. |
| 543 | Supply of different type of Nut bolt for fixing of compressor. |
| 544 | Providing and Installation of PC kit for 1.5/2/3 Tones split type Acs with remote |
| 545 | Providing and replacement of defective compressor by Brand New 3 Tonnes compressor with , for Tower Acs, Suitable for 415-440 V AC, 50HZ supply. Max, Make- Kirloskcr, Copland, carricr,Vo1tas, Godrej, Hitachi Blue star etc |
| 546 | Providing and Installation of Refrgrent pipe set (Copper) as sutaible for 1.5 Tn to 3 Tn AC's with thermal insulation. |
| 547 | Providing and Installation of PCB kit for Indoor and Out door unit of 1.5/2 Tn Invertor type AC Sutaibel for MIDA, Toshiba, Voltas, Blue Star etc make AC's |
| 548 | Providing and Installation of 11 Tn Compressor. (make - Voltas, Copland, Kirloskar or equivalant) |
| 549 | Providing and charging of Refrigerant R 22 |
| 550 | Providing and Installation of HP Switch sutaible for 22 tone Package ac |
| 551 | Providing and Installation of LP Switch sutaible for 22 tone Package ac |
| 552 | Providing and Installation of 5 Tn Compressor. (make - Voltas, Copland, Kirloskar or equvalant) |
| 553 | Providing and Installation of HP Switch sutaible for 5 tone Package AC |
| 554 | Providing and Installation of LP Switch sutaible for 5 tone Package AC |
| 555 | Providing and Installation of Condensing Fan for 5 ton Out door unit (Make:- Siemens, Kirloskar, CG) |
| 556 | Providing and Installation of Out door Contactor |
| 557 | Providing and Installation of Out door Over Load Relay |
| 558 | 5 Tone package AC Operation, running/prevantiv Maintwenance including servising as and when required |
| 559 | 22 Tone package AC AC Operation, running/prevantiv Maintwenance including servising as and when required |
| 560 | Providing Installation and commisning of PCB control unit sutaible for 22 ton package AC system |
| 561 | Providing Installation and commisning of Power contactor of 63 amp, 440v operated |
| 562 | Providing and installation of Single Phase preventar relay |
| 563 | Maintenance Contract for Day to Day Fan servising and maintenance and other mislenious work at Residential Quarters and Service Buildings with the help of 03 no skilled and 03 no un-skilled man power ( 827 x 4 + 693 x 3) |
| 564 | Maintenance Contract for Day to Day No Power and over head line maintenancse work on HT/LT line/pole/structure in substation and rersidiential quarters by 01 no skilled man power ( 827 x 1) |
| 565 | Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required. |
| 566 | Erection of angle iron/ channel iron cross arm on wood/ RCC/ PCC/ steel tubular/ rail pole etc. as required |
| 567 | Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required |
| 568 | Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required. |
| 569 | Supplying and erection of 100 mm X 65 mm pin insulator complete with G. I. Spindle and nuts etc. as required. |
| 570 | Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required. |
| 571 | Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. |
| 572 | Erection of ACSR conductor of 7/2.11 mm to 7/3.00 mm diameter including binding etc. as required |
| 573 | Dismantling of pole/ street light standard/ strut embedded in brick ballast foundation etc. as required. |
| 574 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender