Tender For Name Of Work : (I) Construction of Link Road From Jarla Karyra To Bhanwa Km 0/000 To 4/000 Pkg.843 (Ii) Construction of Rohtan To Chatnol Road Km 0/000 To 5/200 Pkg.774 (Sh:-Formation Cutting, Construction of Passing Places, Breast Wall, R
Tender Value
10.76 Crore
Estimated cost
Bid Submission
31 Jul 2026
6 days left
EMD
22.81 Lakhs
Bank guarantee accepted
Document Fee
20000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Name Of Work : (I) Construction of Link Road From Jarla Karyra To Bhanwa Km 0/000 To 4/000 Pkg.843 (Ii) Construction of Rohtan To Chatnol Road Km 0/000 To 5/200 Pkg.774 (Sh:-Formation Cutting, Construction of Passing Places, Breast Wall, Retaining Wall, Gabion Wall, Missing Cd, Road Side Drain, Parapets, Road Sign Board, Bio Engineering Works, Plastic Cell Filled Cement Concrete Pavement And Tarring Work Etc.Hp-09-843 (Ii)(Sh:- Rofd, Protection Works, Cross Drainage Works, Metalling And Tarring, Road Side Drain, Crash Barriers, Road Furniture & Dumping Structure In Km 0/0 To 5/200 Including Five Years Routine Maintenance Under Pmgsy-Iv Batch I Hp09-774
BOQ
| Sl. No. | Item Description |
| 1 | (i) C/O Link road from Jarla Karyra to Bhanwa Km 0/000 to 4/000 PKG.843 |
| 2 | Construction Part of above |
| 3 | Excavation in soil in hilly area in all heights and depths in all kinds of soil including saturated soil comprising of mixed soil, ordinary rock and hard rock. All work of rock cutting by blasting shall be carried out by taking all necesary precautions against soil erosion, damages to hill side,water pollution etc. and to protect stability of hill side .Rock shall be excavated with chiseling and wedging out of rock (where blasting is prohibited) .All earth work in cutting/excavation including rock excavation shall be carried out true to lines ,grades,sides slopes,width,camber,super-elevation and level as shown on the drawing and as directed by the Engineer-in-Charge in conformity with the requirement of MoRD technical specification for Rural Road, Section. 300 & 1600 to achive designed formation width including hauling and stacking of materials useful for constrcution at suitable sites safe manner and disposal of all surplus material to the approved dumping sites through all modes of transportation including head load and animal transport and mechanical means along with its levelling, fine dressing and carriage of machineries, tools, equipments and safety measures and other incidentals necessary to complete the work by mechanical means and labour if required. The land for dumping sites shall be arranged by the contractors himself and nothing extra shall be paid on this account,filling of unevenness blind age and finishing of the road to specified dimensions or as directed by the Engineer-in-charge for smooth riding.The recovery for stones ,whether useful or 9008.69 (Nine thousandeight point six nine) cubic metre at the rate of Rs 300/-only (Rupees three hundred only ) per cubic meter shall be effected on prorata basis in all circumstances .Any loss to the public and private property during the course of excavation shall be the absolute responsibility of the contractor ,which shall have to be duly compensated by him in all cases. |
| 4 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per MORD Technical Specification Section 300 Including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 5 | Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drain and Parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks (Where blasting is prohibited) as per drawings and M.O.R.D. technical specification section 300 and 1600 and as per direction of the Engineer- In – Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides, bottom and back filling in trenches with excavated suitable approved material to the original surface in layer not executing 150 mm (one hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water ) upto any depth any quantam of water including cleaning of slush which may arise out during dewatering complete as per direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 6 | Providing and laying concrete Mechanically mixed and vibrated 1:4:8 (One Cement isto four sand isto eight graded crushed stone aggregate 40 mm (forty milimetre) nominal size for plain /reinforced concrete in open foundations and plinths or similar works complete as per drawing and MoRD technical specification rural roads section 800, 900, 1200 and 1600 including carriage of materials upto all leads lifts and as per the direction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 7 | Providing and laying concrete Mechanically mixed and vibrated 1:4:8 (One Cement isto four sand isto eight graded crushed stone aggregate 25 mm nominal size for plain /reinforced concrete in open foundations and plinths or similar works complete as per drawing and MoRD technical specification rural roads section 800, 900, 1200 and 1600 including carriage of materials upto all leads lifts and as per the direction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 8 | Random Rubble Stone masonry in cement-mortar (1:6) for substructure complete as per drawing & MORD Technical specification sections 700 and 1200 including carriage of materials, within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 9 | Construction of dry rabble masonry for retaining walls, breast walls, revetment walls and parapets etc. for sub structure and super structure complete as per drawing and MORD Technical specification sections 700 and 1300 including carriage of materials, within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 10 | Back filling behind abutment, wing wall and return wall and retaining wall with granular material complete as per drawings and MORD technical specification Section 1200 &1600 including carriage of materials with in all leads and lifts and as per the direction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 11 | Providing weapholes in brick masonry /stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100mm (one hundred milimetre) dia (inner dia) PVC pipe extending through the full width of the structures with slop of 1(v);20 (H) towards drawing face complete as per drawings and MoRD technical specifications section 1200 and as per entire satisfaction,directin by Engineer-In-Charge and including carriage of materails with in all leads and lifts.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 12 | Providing and laying of boulder apron laid in wire crates with 4 mm (four millimetre) dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm (one hundred millimetre into one hundred millimetre) mesh (woven diagonally) including 10 % (ten percent) extra for laps and joints laid with stone boulders weighing not less than 40 kg (forty kilogram) each as per drawing and MORD technical specifications section 1300 including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 13 | Loosening of the ground upto a level of 300 mm (three hundred millimetre) below the subgrade level, watered, graded with motor grader and compacted in layers to meet requirement of Tables 300.1 and 300.2 of MORD with three wheel 80-100 (eighty to one hundred) Kn static roller for subgrade construction as per MORD Technical Specification section 300. as per direction of Engieer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 14 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with in all lifts and leads, transporting to site, spreading, grading by mechanical means to required slope and compacted with three wheel 80-100 (eighty - hundred) kN static roller to meet requirement of Table 300.2 complete as per MORD technical Specification section 300 & 1600 and as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 15 | Construction of 1st layer Bio enzyme (100 mm) based soil stablised layer (accredited by IRC) to a required thickness as per manufacturer design with local soil material/gravel/murram, having CBR greater than Equal to 5% and treating it with Bio Enzyme in the ratio 1L for 12.5 cum soil , spreading in uniform layer with motor grader on prepared surface. mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density complete as per technical specification incl all labour, materials, like soil and metal, equipments etc., complete, including Supervision (Supervisor shall be provided by Bio Enzyme Vendor) as per the directions of the Engineer incharge of the work . Bio Enzyme Supervisor accomodation, food and local transport will be in scope of Contractor.The soil will have clay percentage by hydrometry between 8% to 30%, including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 16 | Construction of 2nd layer Bio enzyme (75 mm) based soil stabilised layer (accredited by IRC) to a required thickness as per manufacturer design with local soil material/gravel/murram, having CBR greater than Equal to 6% and treating it with Bio Enzyme in the ratio 1L for 15.0 cum soil with 25% 40mm crusher broken metal(of compacted thickness) in desing mix, spreading in uniform layer with motor grader on prepared surface. mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density complete as per technical specification incl all labour, materials, like soil and metal, equipments etc., complete, including Supervision (Supervisor shall be provided by Bio Enzyme Vendor) as per the directions of the Engineer incharge of the work . Bio Enzyme Supervisor accomodation, food and local transport will be in scope of Contractor.The soil will have clay % by hydrometry between 8% to 30% , including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 17 | Applying of curing material TerraCure after the application of Bio Enzyme layer (accredited by IRC) for by mixing TerraCure with water in the ratio of 1:200 and then appyling the mixed solution @ 3 Litres for 1 sq.mt including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 18 | Providing and applying primer coat with Bitumen emulsion (SS-I) on the prepared surface of granular base including cleaning of road surface with Hydraulic brooms and spraying primer at the rate 1.00 Kg. (Zero point eight five kilogram) per square metre using one part of bitumen emulsion SS-I and two parts of water mixed with Nano technology Tera prime emulsion @ 1% (One percent) of weight of emulsion by mechanical means as per M.O.R.D. technical specifications section 500 as per the entire satisfaction and directions of Engineer – in- Charge including carriage of materials within all leads,lifts and other incidentals . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding .Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 19 | Providing and applying tack coat with Bitumen emulsion (RS-I) on the prepared bituminious surface cleaned with hydraulic broom and spraying with bitumen emulsion pressure distributor at the rate 0.250 Kg (Zero decimal two five zero kilogram) per Square metre using one part of bitumen tack emulsion RS-I and two parts of water mixed with Nano technology nanotac @ 1.4% (One decimal four percent) of weight of emulsion as per MORD technical specification section 500, and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana toll tax and other taxes imposed by the Government but excluding GST. |
| 20 | Providing, laying and rolling of close-graded Mix Seal Surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) @ 0.338 kg/per ten square meter aggregates using penetration grade bitumen @ ie binders content @27.50kg/10sqm or 5.11% by weight and minimun density of MSS should be 2.10 gm/cc to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per M.O.R.D. technical specifications section 500 including all leads, lifts and carriage of materials complete as per entire saisfication of the Engineer in Charge. The rate is including octroi, royality, malkana toll tax and other taxes imposed by the Government but excluding GST. |
| 21 | Construction of Granular Sub-Base(Grade-1) by providing well graded materials,spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three Wheel 80-100 (Eighty-hundred) kN static roller to achieve the desired density, complete as per MORD Technical Specification section 400 for grading-I Material, as per the entire satisfaction and directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 22 | Providing, laying, spreading and compacting by mechanical means crushed stone aggregate size 63mm to 45mm ( sixty three millimetre to forty five millimetre) Grading-II 75mm ( seventy five millimetres) consolidated thickness to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (eighty to one hundred) K.N. static roller in stages to proper grade and camber including applying and brooming, stone screening type-B of size 11.2mm ( eleven point two milimetres) nominal size at the rate of 0.20 cum ( zero point two zero cubic metres) per ten square metres and binding material at the rate of 0.06 cum ( zero point zero six cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per M.O.R.D. technical specifications section 400 and as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 23 | Providing, laying, spreading and compacting by mechnical means of crushed stone aggregate size 53mm to 22.4mm ( fifty three millimetre to twenty two point four millimetre) Grading-III [75mm( seventy five millimetres) consolidated thickness] to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 K.N. (eight to one hundred) static roller in stages to proper grade and camber, including applying and brooming, stone screening type-B of size 11.2mm ( eleven point two milimetres) nominal size at the rate of 0.18cum (zero point one eight cubic metres) per ten square metres and to fill up the interstices of coarse aggregate, watering and compacting to the required density as per M.O.R.D. technical specifications section 400 and as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental. The rate includes octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding GST. |
| 24 | Construction of plastic cell filled cement concrete pavement, thickness as per design, over a prepared sub base, with 53 grade Ordinary Portland Cement (OPC) or any other type as per Clause 1501.2.4 M30 (Grade). Coarse and fine aggregates conforming to IS : 2386, maximum in a concrete mixer of not less then 0.2 cum capacity and appropeiate weigh batcher using approved mix design(As per IRC 44-2088, laid in approved fixed side formwork (steel channel, wedges, steel plates including levelling the fomwork as per drawing), spreading the concrete with sholvels, rakes, conpacted using needle, screed an plate vibrators and finished in continuous operation, Concrete should have a slump of 30-50MM with use of approved plasticizer if required. Formwork of plastic cells should be made of High Density Polyethylene (HDPE), sheets having thickness ranging from 0.20-0.22MM with sides 150MMx150MM and height as fixed by engineer in charge. Cells should be stitched using thread, thus ensuring optimum joint strength. Joint strength should be a minimum of 2 Kilo Newton per metre. Heat welded cells should not be procured as they are not able to withstand the tension and often break when they are laid in the full width of the carriageway. Iron spikes of about 200MM long are to be used to keep the cell walls taut. Nylon thread or rope may be used to prevent collase of cells during placement of concrete. Iron spikes to be taken out for use in other place as soon as the concrete is in place. The subbase should be provided with concrete/stone block or brick on edge on either side of the carriageway protecting the subbase with full thickness of the concrete pavement for its confinement and protection. Curing of concrete slabs for 14 - days, curing compound ( where specified) and water finishing to lines and grade as per drawing and Technical Specification of cell filled Concrete Pavement Published by NRRDA. including the cost of form work in retaining walls, breast walls etcetera as per the direction of Engineer-in-Charge including carriage of materials, within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 25 | Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and M.O.R.D. technical specifications section 1700 including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana toll tax and other taxes imposed by the Government but excluding GST. |
| 26 | Providing and laying mechanically mixed and vibrated plain cement concrete in sub structure grade M-15 (1:2:4) Nominal Mix with 40mm (forty millimetre) nominal size graded stone aggregate on ground or under water including curing complete including pumping or bailing out water de-watering removal of slush as required at site, which may arises at the time of laying concrete complete for all heights/depths including cost of form work in parapets and toe wall etcetra as per drawing and MORD technical specification section 800, 900, 1200 and 1600 including carriage of materials within all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government but excluding GST. |
| 27 | Providing and laying concrete mechanically mixed and vibrated PCC M-10 (1:3:6 Nominal mix) with 20mm(twenty millimeter) nominal size for plain/reinforced concrete in open foundation and plinths or similar works complete as per drawings and MoRD technical specification section 800, 900, 1200 and 1600 and curing complete including the cost of form work and hauling of materail in all leads and lifts as per the entire satisfication and direction of Engineer in charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 28 | Construction of unlined surface drains of average cross-sectional area 0.40 sqm (zero decimal four zero per square metre) in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment as per Technical Specification Clause 307 and as directed by the Engineer-In-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax and any other taxes imposed by the Government but excluding GST. |
| 29 | Providing and laying concrete mechanically mixed and vibrated PCC grade M-15 (M-fifteen) design mix with cement contents not less than 275kg (two hundred seventy five kilogram per cubic metre) with aggregate 40mm(forty millimeter) nominaal size for plain/reinforced concrete in open foundation and plinths or similar works (craddle bedding) complete as per drawings and MoRD technical specificcation section 800, 900, 1200 & 1600 and curing complete including the cost of form work and hauling of materail in all leads and lifts as per the entire satisfication and direction of Engineer in charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 30 | Providing and laying mechanically mixed and vibrated plain cement concrete in flooring using plain cement concrete grade M-15 (M-fifteen) nominal mix 1:2½:5 (One cement : Two & half sand : Five graded crushed /broken stone aggregate 20mm ( twenty millimeter) nominal size) including cost of form work complete as per drawing and MORD technical specification section 1300 and as per directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 31 | Filling in foundation trenches as per drawing and MORD technical specification Clause 305.3.9 earth filling and as per directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 32 | Providing and Laying reinforced cement concrete pipe IS (Indian Standard ) class NP3 (Non Pressure-three) of 900 (Nine Hundred) milimetre internal dia metre for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (one cement is to two sand ) but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per drawings and MoRD technical specifications section 1100 including carriage of materials with in all leads and lifts as per the entire satisfaction and direction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 33 | Providing and Laying reinforced cement concrete pipe IS (Indian Standard ) class NP3 (Non Pressure-three) of 300 (Three Hundred) milimetre internal dia metre for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (one cement is to two sand ) but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per drawings and MoRD technical specifications section 1100 including carriage of materials with in all leads and lifts as per the entire satisfaction and direction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 34 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be paintedThe rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. with primer and two coats of epoxy paint as per drawing & MORD Specification section 1700 and Annexure 1700.1 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 35 | Providing and fixing of typical PMGSY informatory Logo as per MORD specifications and as per standard design of National Rural infrastructure agency development agency, of diamond size 600 x 600 mm, MS plate of 1.6 mm thick, and board plate of 1100 x 300mm, MS plate of 1.6 mm thick and 2.4 m deep 75mm x 75 mm x 6mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. size including fitting and painting, Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing and MORD specification Section 1700.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 36 | Reinforced cement concrete M-15 (M-fifteen) grade 5th (fifth) Kilometre stone (Precast) of standard design as per IRC :8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 37 | Reinforced cement concrete M-15 (M-fifteen) grade Ordinary Kilometer Stone (Precast) of standard design as per IRC :8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 38 | Reinforced cement concrete M-15 (M-fifteen) grade 200m (two hundred metre) Stone (Precast) of standard design as per IRC :8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 39 | Providing and erecting direction and place identifications of semi reflective sign boards up to 0.90 sqm as per IRC:67 made of 2 mm thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 mm x 47mm of 12 SWG Square tube of 3050 mm height duly strengthened by 25 mm x 5 mm M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and MoRD Technical Specification Section 1700 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 40 | Providing and fixing of Semi-reflective cautionary, mandatory and informatory sign board 600mm (six hundred millimetre) equilateral triangle as per IRC-67 made of 1.5 mm (one point five millimetre) thick MS-sheets duly stove enameled paint in white colour in front and gray colour on back with red reflective border of 65 mm (sixty five millimetre) width and required letters and figures with reflective tape engineering grade as per section 1700 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47mm of 12 SWG ( forty seven into forty seven millimetre of twelve Standard Wire Gauge) sheet square tube firmly fixed to the ground by mean of properly designed foundation with M-15 grade ( M-fifteen grade) cement concrete 450mm x 450 mm x 600 mm ( four hundred fifty into four hundred fifty into six hundred millimetre), 600 mm ( six hundred millimetre) below ground level as per drawings and MORD Technical Specification section 1700 including painting angle iron post with primer and two post of Epoxy paint as per specification and as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 41 | Providing and fixing of Semi-reflective cautionary, mandatory and informatory sign board 600mm (six hundred millimetre) Circular as per IRC-67 made of 1.5 mm (one point five millimetre) thick MS-sheets duly stove enameled paint in white colour in front and gray colour on back with red reflective border of 65 mm (sixty five millimetre) width and required letters and figures with reflective tape engineering grade as per section 1700 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47mm of 12 SWG ( forty seven into forty seven millimetre of twelve Standard Wire Gauge) sheet square tube firmly fixed to the ground by mean of properly designed foundation with M-15 grade ( M-fifteen grade) cement concrete 450mm x 450 mm x 600 mm ( four hundred fifty into four hundred fifty into six hundred millimetre), 600 mm ( six hundred millimetre) below ground level as per drawings and MORD Technical Specification section 1700 including painting angle iron post with primer and two post of Epoxy paint as per specification and as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 42 | Providing and fixing of Maintenance Board as per MORD specifications and drawing. MS Plates of 1.6 mm thick 900 mm x 1500 mm welded over 6mm thick steel plates. 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing MORD Specification section 1700 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 43 | Guard Stone on Curve made of Reinforced cement concrete local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and MORD technical specification section 1700 as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 44 | Providing and Fixing pavement marker (Cat eyes) made out of ABS 3 M (three) plastic of size 128x110x29.5 mm ( one hundred twenty eight into one hundred ten into twenty nine decimal five millimetres) without nail having 50mm ( fifty millimetres) stem of ABS. The pavement marker shall be installed with epoxy ABS including carriage of materials and equipment with all mode of transportation and as per direction of MORD Specification section 1700 & Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 45 | Providing and fixing road side delineator of height 600mm (six hundred millimetre) made of MS pipe of size 50mm (fifty millimetre) of 1.6 SWG having High intensity micro prismatic reflective sheeting confirming to ASTM type-XI upto 300mm length Balance 300mm (three hundred millimetre) It shall be painted with synthetic enamel paint of alternate colour black & white strips. It shall be fixed with 30 x 30 x 30cm (thirty into thirty into thirty centimetre) block with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimetre) nominal size as per specifications complete as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 46 | Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high (eighty to one hundred centimetre) above ground level, painted black and white in 15 cm (fifteen centimetre) wide strips, fitted with 80 x 100 mm (eighty into one hundred millimetre) rectangular or 75 mm dia (seventy five millimetre diametre) circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings and specifications complete as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 47 | Providing and fixing road side Single Chevron markers of height 600mm made of MS pipe of size 50mm (fifty millimetre) of 1.6 (one point six) SWG having High intensity micro prismatic reflective sheeting confirming to ASTM type-XI upto 300mm (three hundred millimetre) length Balance 300mm (three hundred millimetre) It shall be painted with synthetic enamel paint of alternate colour black & white strips. It shall be fixed with 30 x 30 x 30cm (thirty into thirty into thirty centimetre) block with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimetre) nominal size complete in all respect as per specifications complete as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 48 | Providing and Laying of Hot applied thermoplastic compound road marking paint 2.5mm (two decimal five millimetre) thick with refletorising glass beads at the rate 250 gram (two hundred fifty) gram per square metre area, thickness of 2.5mm (two decimal five millimetre) is exclusive of surface applied glass beads as per specificaiton and with strips of 0.10 (Zero decimal one) metre width in centre lines or edge lines of the road as per the directions of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 49 | Collection of hardwood cuttings from appropriate approved species, from sources within all lead of the road, including trimming the sterms and making the cuttings, and transporting while wrapped in damp material as per specificationsas per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 50 | Planting unrooted hardwood cuttings (2.0 m in length and 3.0 to 8.0 cm (three to eight centimetre) in diameter) of appropriate approved species on slopes, including final preparation of cuttings, preparing lines, digging trenches to specified dimensions and forming fascines as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 51 | Road side tree planting containerzed tree and shurbs including potting, transplanting, compacting and mulching on slopes 30 (thirty) degree to 60 (sixty) degree pits size 30 cm (thirty centimetre) diametre into 30cm (thirty centimetre) depth. Providing and mixing compost with thre soil, Provisioning and applying of pesticides of required including labour abd transporation to the site. as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 52 | (ii) C/O Rohtan to Chatnol Road Km 0/000 to 5/200 PKG.774 |
| 53 | Construction Part of above |
| 54 | Excavation in soil in hilly area in all heights and depths in all kinds of soil including saturated soil comprising of mixed soil , ordinary rock and hard rock .All work of rock cutting by blastingshall be carried out by taking all necesary precautions against soil erosion ,damages to hill side ,water pollution etc. and to protect stability of hill side .Rock shall be excavated with chiseling and wedging out of rock (where blasting is prohibited) .All earth work in cutting /excavation including rock excavation shall be carried out true to lines ,grades ,sides slopes,width,camber,super-elevation and level as shown on the drawing and as directed by the Engineer-in-Charge in conformity with the requirement of MoRD technical specification for Rural Road, Section. 300 & 1600 to achive designed formation width including hauling and stacking of materials useful for constrcution at suitable sites safe manner and disposal of all surplus material to the approved dumping sites through all modes of transportation including head load and animal transport and mechanical means along with its levelling, fine dressing and carriage of machineries, tools, equipments and safety measures and other incidentals necessary to complete the work by mechanical means and labour if required. During the mobilisation period, contractor should take the advanced x-sec in 15 m interval of whole road length in the presence of Engineer-in-charge or his representative. In case the advanced x-sec has been taken in the presence of Engineer-in-Charge representative, in that case the same has to be got approved from Engineer-in-Charge. The land for dumping sites shall be arranged by the contractors himself and nothing extra shall be paid on this account,filling of unevenness blind age and finishing of the road to specified dimensions or as directed by the Engineer-in-charge for smooth riding .The recovery for stones ,whether usefule or not for 1352.28cum. (One Thousand three hundred sixty fifty two point twenty eight Cubic Metre) in all cases, @ Rupees 300/= only (Rupees three Hundred) per cubic metre shall be effected on prorata basis in all circumstances .Any loss to the public and private property during the course of excavation shall be the absolute responsibility of the contractor ,which shall have to be duly compensated by him in all cases.. |
| 55 | Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drain and Parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks (Where blasting is prohibited) as per drawings and M.O.R.D. technical specification section 300 and 1600 and as per direction of the Engineer- In – Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides, bottom and back filling in trenches with excavated suitable approved material to the original surface in layer not executing 150 mm (one hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water ) upto any depth any quantam of water including cleaning of slush which may arise out during dewatering complete as per direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 56 | Providing and laying concrete Mechanically mixed and vibrated 1:6:12 (one cement: six sand : twelve graded stone aggregates 40 mm (forty millimetre) nominal size) for plain/reinforced concrete in open foundations complete as per drawing and technical specification section 800 and 1200 curing complete including the cost of form work and hauling of materials in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 57 | Providing and laying concrete mechanically mixed and vibrated PCC M-10 (Ten) nominal mix 1:3:6(one cement : three sand : six aggregate) design mix with cement contents not less than 220kg (two hundred Twenty kilogram per cubic metre) with 40 mm (Forty millimeter) nominaal size for plain/reinforced concrete in open foundation and plinths or similar works complete as per drawings and MoRD technical specification section 800, 900, 1200 and 1600 and curing complete including the cost of form work and hauling of materail in all leads and lifts as per the entire satisfication and direction of Engineer in charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 58 | Providing and laying concrete mechanically mixed and vibrated grade M-15 (M-fifteen) nominal mix 1:1.5:3 (one cement : one point five sand:three aggregate) design mix with cement contents not less than 275kg (two hundred seventy five kilogram per cubic metre) with aggregate 40 mm (forty millimeter) nominaal size for plain/reinforced concrete substructure complete as per drawings and MoRD technical specificcation section 800, 900,1200 and 1600 and curing complete including the cost of form work and hauling of materail in all leads and lifts as per the entire satisfication and direction of Engineer in charge . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 59 | Providing and laying concrete Mechanically mixed and vibrated 1:4:8 (One Cement : four sand : eight graded crushed stone aggregate 25 mm (Twenty five milimetre) nominal size for plain /reinforced concrete in open foundations and plinths or similar works complete as per drawing and MoRD technical specification rural roads section 800, 900, 1200 and 1600 including carriage of materials upto all leads lifts and as per the direction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 60 | Construction of dry rabble masonry for retaining walls, breast walls, revetment walls and parapets etc. for sub structure and super structure complete as per drawing and technical specification section 700 and 1300 including and hauling of materials in all leads and lifts and as per entire satisfaction of Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 61 | Stone masonry work in cement mortar in (1:6) (one cement : six sand) for substructure complete as per drawing and technical specifications section 700 & 1200. including and hauling of materials in all leads and lifts and as per entire satisfaction of Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 62 | Providing and laying of boulder apron laid in wire crates with 4 mm (four millimetre) dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm (one hundred millimetre into one hundred millimetre) mesh (woven diagonally) including 10 % (ten percent) extra for laps and joints laid with stone boulders weighing not less than 40 kg (forty kilogram) each as per drawing and MORD technical specifications section 1300 including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 63 | Providing weapholes in brick masonry /stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100mm (one hundred milimetre) dia (inner dia) PVC pipe extending through the full width of the structures with slop of 1(v);20 (H) towards drawing face complete as per drawings and MoRD technical specifications section 1200 and as per entire satisfaction,directin by Engineer-In-Charge and including carriage of materails with in all leads and lifts.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 64 | Back filling behind abutment, wing wall and return wall and retaining wall with granular material complete as per drawings and MORD technical specification Section 1200 &1600 including carriage of materials with in all leads and lifts and as per the direction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 65 | Providing and Laying reinforced cement concrete pipe IS (Indian Standard ) class NP3 (Non Pressure-three) of 1000 (One thousand) milimetre internal dia metre for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (one cement : two sand ) but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per drawings and MoRD technical specifications section 1100 including carriage of materials with in all leads and lifts as per the entire satisfaction and direction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 66 | Providing and erecting W metal beam crash barrier comprising 3 mm (three milli meter) thick corrugated sheet metal beam rail 70 cm (Seventy centimetre) above road/ground level fixed on ISMC series Channel vertical part of 150 mmx75 mmx 5 mm (One Hundred fifty Milli meter x seventy five Millimeter x Five milli meter ) special 2.00 metre ( Two Metre ) center to center 1.80 metre ( One point Eighty Metre) high 1.10 metre(one Point Ten Meter ) below ground road level all steel parts and filaments to be galvanized by hot dip process, a fitting to confirm to IS 1367 and IS-1364 metal beam rail to be fixed on the vertical post with a space of channel section 150 mmx75 mmx5 mm (One Hundred fifty Milli meter x seventy five Millimeter x Five milli meter ), 330 mm ( Three Hundred Milli Meter )long complete as per MORTH Specification section 800 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 67 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with in all lifts and leads, transporting to site, spreading, grading by mechanical means to required slope and compacted with three wheel 80-100 (eighty - hundred) kN static roller to meet requirement of Table 300.2 complete as per MORD technical Specification section 300 & 1600 and as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 68 | Construction of Granular Sub-Base(Grade-1(one)) by providing well graded materials, as per table 401 spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three Wheel 80-100 (Eighty-hundred) kN static roller to achieve the desired density, complete as per MORD Technical Specification section 400 for grading-I(one) Material, as per the entire satisfaction and directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 69 | Providing, laying, spreading and compacting stone aggregates of specific sizes 63 mm to 45 mm (sixty three millimeter to forty five milimeter ) Grading-II, 75mm (Seventy five millimeter) consolidated thick to water bound macadam specification including spreading in uniform thickness,using template hand packing, rolling with three wheel 80-100 (eighty to hundred)static roller in stages to proper grade and camber, applying and brooming, stone screening type-B of size 11.2 mm (eleven point two millimeter) niminal size at the rate of 0.18cum (zero point one eight cubic metres) per 10 square meter (Ten) and to fill up the interstices of course aggregate, watering and compacting to the required density as per M.O.R.D. 2014 technical specifications clause 1701 by mechanical means as per the entire satisfaction and directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 70 | Providing, laying, spreading and compacting by mechnical means of crushed stone aggregate size 53mm to 22.4mm ( fifty three millimetre to twenty two point four millimetre) Grading-III 75mm( seventy five millimetres) consolidated thickness to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 K.N. (eight to one hundred) static roller in stages to proper grade and camber, including applying and brooming, stone screening type-B of size 11.2mm ( eleven point two milimetres) nominal size at the rate of 0.18cum (zero point one eight cubic metres) per ten square metres and to fill up the interstices of coarse aggregate, watering and compacting to the required density as per M.O.R.D. technical specifications section 400 and as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental. The rate includes octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 71 | Providing and applying primer coat with bitumen emulsion ( Emulsion SS-1(H)) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm (zero point seventy to one kilogram per square meter) using mechanical means as per Technical Specification Clause 502 as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 72 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kgper sqm ( zero point two zero to zero point two five kilogram per square meter ) on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 73 | Providing, laying and rolling of Cold Mix close-graded premix surfacing material of 20 mm(twenty millimeter) thickness composed of 11.2 mm to 0.9 mm (eleven point two millimeter to zero point nine millimeter) (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN (eight- ten kilonewton) static roller and finishing to required level and grades as per technical specification IRC:SP:100-2014 as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 74 | Formwork of plastic cells should be made of High Density Polyethylene (HDPE), sheets having thickness ranging from 0.20-0.22MM (zero point two zero millimetre to zero point two two millimetre)with sides 150MMx150MM (one hundred fifty millimetre * one hndred fifty millimetre) and height as fixed by engineer in charge. Cells should be stitched using thread, thus ensuring optimum joint strength. Joint strength should be a minimum of 2(two) Kilo Newton per metre. Heat welded cells should not be procured as they are not able to withstand the tension and often break when they are laid in the full width of the carriageway. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. |
| 75 | Construction of unlined surface drains of average cross sectional area 0.40 sqm (zero point fortey square meter ). in soil to specified lines grades levels and dimensions .Excavated materials to be used in embankment with a lift up to 3 m (three meter ) band lead of 50 m (fifty metre) (average lead 25 m (twenty five metre) ) as per technical Specification section 300 as per the entire satisfaction and direction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 76 | Providing and fixing \\"Citizen Information Boards\\" as per specifications and drawings Two MS Plates of 1.60mm (one point sixty milimeter) thick duly welded with MS angle iron frame 25mmx25mmx5mm (twenty five millimetre x twenty five millimetre x five millimetre) on edges supported with 2Nos(two numbers) horizontal posts made of 75mmx75mm (seventy five millimetre x seventy five millimetre) of 125 (one hundred twenty five) SWG Steel tube duly embanded in and including cement concrete M-15 (fifteen) grade blocks of 600mm x600x750mm (six hundred millimetre x six hundred millimetre x seven hundred fifty millimetre) below ground level. All MS will be stove enameled both side lettering and printing arrows border etc will be painted with ready synthetic enamel paint of superior quality in required shade and colur. all sections of posts and steel tube will be primer and two coats of epoxy point as per drawing. and technical specification section 1700 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. he rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 77 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm (one point six millimetre) thick, top and middle plate duly welded with MS flat iron 25mm x 5mm (twenty five millimetre into five millimetre) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm (twenty five millimetree * twenty five millimetre * five millimetre) . The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 (two) nos. 75mm x 75 mm (seventy five millimetre*seventy five millimetre) of 12(twelve) SWG sheet tubes posts duly embedded in cement concrete M-15 (fifteen) grade blocks of 450mm x 450mm x 600mm (four hundred fifty millimetre*four hundred fifty millimetre*six hundred millimetre) , 600mm ( siux hundred millimetre) below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm (fourty seven milllimetre*fourty seven milllimetre) of 12(twelve) SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be paintedThe rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. with primer and two coats of epoxy paint as per drawing & MORD Specification section 1700 and Annexure 1700.1 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 78 | Providing and erecting direction and place identifications of semi reflective sign boards up to 0.90 sqm as per IRC:67 made of 2 mm ( 2 millimeter ) thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm (seventy millimeter )width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 mm x 47mm (forty seven millimeter x forty seven millimeter ) of 12 (twelve) SWG Square tube of 3050 mm height duly strengthened by 25 mm x 5 mm (twenty five millimetre x five millimetre) M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm (four Hundred Fifty millimeter x Four Hundred Fifty millimeter x Six Hundred millimeter) , 600 mm (Six Hundred millimeter) below ground level as per approved drawing and MoRD Technical Specification Section 1700 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 79 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm ( one point Five millimeter) thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm (sixty five millimeter ) width and required letters and figures with reflective tape engineering grade as per MORD technical specification section 1700 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 (forty seven millimeter x forty seven millimeter x twelve millimeter ) SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm (four Hundred Fifty millimeter x Four Hundred Fifty millimeter x Six Hundred millimeter), 600 mm (Six Hundred millimeter) below ground level as per approved drawing (600 mm equilateral & triangle) including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 80 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm (one pont five ) thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Section 1700 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 (forty seven millimeter x forty seven millimeter x twelve ) SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M- 15 grade(fifteen) cement concrete 450x450x600 mm (four hundred fifty millimetre x four hundred fifty millimetre x six hundred millimetre), 600mm (six hundred millimetre) below ground level as per approved drawing section 1700 (800mmx600mm rectangular) including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 81 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm (one pont five ) thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm(sixty five millimetre) width and required letters and figures with reflective tape engineering grade as per MORD technical specification section 1700 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 (forty seven millimeter x forty seven millimeter x twelve ) SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 (fifteen) grade cement concrete 450x450x600 mm (four Hundred Fifty millimeter x Four Hundred Fifty millimeter x Six Hundred millimeter), 600 mm (Six Hundred millimeter) below ground level as per approved drawing (chevron sign board) including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 82 | Providing 10 (ten) nos rumble strips covered with bituminous carpet, 15-20 mm (fifteen -twenty millimetre) high at center, 250 mm (two hundred fifty millimetre) wide placed at 1 m (one meter ) center to center at approved locations to control speed, marked with white strips of road marking paint as per drawing and Technical Specification including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 83 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm(one point five millimetre) thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm(sixty five millimetre) width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12mm (fourty seven into fourty seven into twelve millimetre) SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M- 15 (fifteen)grade cement concrete 450x450x600 mm (four hundred fifty into four hundred fifty into six hundred millimetre), 600 mm (six hundred millimetre) below ground level as per approved drawing Clause 1701.2.2(Cautionary circular 600 mm) including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 84 | Providing and laying of Hot applied thermoplastic compound 2.5 mm (trwo point five milimeter) thick including reflectorising glass beads at the rate of 250 gms (Two hundred fifty grams) per sqm area, thickness of 2.5 mm (two point five milimeter) is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 85 | Providing and fixing hazard marker of size 900x300 mm ( nine hundred x three hundred millimeter ) made of 2mm ( two millimetre) thick aluminum sheet with back support of M.S. angle 25x25x3 mm (twenty five millimetre x twenty five millimetre x three millimetre).as per section 1700 of RT&H specifications compete board process by heat treatment process. Hi grade sheeting or front side and provided with by post of ht. 1. 50 mtr ( one pont fifty meter ) made of M.S. angle 50x50x6 mm (fifty millimeter x fifty millimeter x 5 millimeter ) fixed in C.C. 1:2:4 ( one cement : two Sand : four Aggregates ) back of size 600x600x600 (six hundred x six hundred x six hundred ) including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 86 | Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm (eighty -hundred centimeter )high above ground level, painted black and white in 15 cm(fifteen centimeter ) wide strips, fitted with 80 x 100 mm (eighty x hundred millineter ) rectangular or 75 mm ( seventy five mm ) dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 87 | Providing and fixing of road stud 100x 100 mm (one hundred x one hundred millimetre) , die-cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm (thirty millimetre) upto a depth of 60 mm (sixty millimetre) and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973( section 1700) including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 88 | Reinforced cement concrete Mechanically mixed and vibrated M-15 (fifteen) grade kilometer stone local stone of standard design as per IRC :8 fixing in position including painting and printing etc. as per drawing and MORD technical specifications rural roads section 1700. (ordinary kilometer stone precast). including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 89 | Reinforced cement concrete Mechanically mixed and vibrated M-15 (fifteen) grade kilometer stone local stone of standard design as per IRC :8 fixing in position including painting and printing etc. as per drawing and MORD technical specifications rural roads section 1700. (200 meter stone pre cast) including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 90 | Reinforced cement concrete Mechanically mixed and vibrated M-15(fifteen) grade kilometer stone local stone of standard design as per IRC :8 fixing in position including painting and printing etc. as per drawing and MORD technical specifications rural roads section 1700. (5th kilometer stone pre cast). including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 91 | Routine Maintenance after completion of construction work as per terms and condition of bid document that is 7c(vi) of contract data to general condition of contract and technical specifications of Ministry of Rural Development for rural roads August 2004 for rural roads including hauling /carriage of all labour equipment and materials to various locations through all modes of transportation in all leads and lifts to the entire satisfaction of the Engineer in charge. As per rates Specified in Bidding Documents. Please Enable Macros to View BoQ information |
| 92 | Routine Maintenance after completion of construction works including hauling/carriage of all labour equipement and material to various locations of site through all modes of transportation in all leads and lifts to the entire satification of Eingineer in Charge. |
| 93 | Maintenance cost for 1ST year |
| 94 | Maintenance cost for 2nd year |
| 95 | Maintenance cost for 3rd year |
| 96 | Maintenance cost for 4th year |
| 97 | Maintenance cost for 5th year TEXT # Item Description |
| 98 | Routine Maintenance after completion of construction works including hauling/carriage of all labour equipement and material to various locations of site through all modes of transportation in all leads and lifts to the entire satification of Eingineer in Charge. |
| 99 | Maintenance cost for 1ST year |
| 100 | Maintenance cost for 2nd year |
| 101 | Maintenance cost for 3rd year |
| 102 | Maintenance cost for 4th year |
| 103 | Maintenance cost for 5th year |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender