Tender For Construction of T-Ii-04 Quarter At Kaying, Siang District.
Tender Value
1.34 Crore
Estimated cost
Bid Submission
31 Jul 2026
2 days left
EMD
1.34 Lakhs
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
West Siang → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of T-Ii-04 Quarter At Kaying, Siang District.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m. |
| 2 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. |
| 3 | Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering. |
| 4 | Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring an shuttering in:b) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level.(Wall) |
| 5 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone shingle 20 mm nominal size). |
| 6 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.b) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone shingle 20 mm nominal size). |
| 7 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.a) M20 (1 cement : 1.5 coarse sand : 3 stone shingle 20 mm nominal size). |
| 8 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone shingle 20 mm nominal size). |
| 9 | Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size). |
| 10 | Brick work with best available local bricks in plinth and in Superstructure in cement mortar 1:4 (1 cement : 4 fine sand). |
| 11 | Reinforcement of RCC work including bending, binding and placing in position complete. |
| 12 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately). |
| 13 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing inposition and applying a priming coat of approved steel primer using structural steel etc.as required. a) In stringers, treads, landings etc. of stair cases, including use of chequered platewherever required, all complete |
| 14 | Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering. |
| 15 | Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement. a) 40 mm thick |
| 16 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete c) Size of Tile 800x800 mm |
| 17 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry.( for WC & Bath floors&dado) |
| 18 | Chequered terrazzo tiles 22 mm thick with marble chips of sizes upto 6mm in floors on 25mm thick bed mortar 1 : 3 (1 cement : 3 coarse sand) jointed with neat cement slurrymixed with pigment to match the shade of the tiles including rubbing and polishingcomplete:a) Light shades using white cement |
| 19 | Neat Cement Punning |
| 20 | Cement plaster skirting (up to 30 cm height) with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, including rounding of junctions with floor.b) 21 mm thick |
| 21 | Providing and laying damp proof course 50 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size). |
| 22 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. |
| 23 | Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete. |
| 24 | Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth. |
| 25 | Providing and fixing Aluminium glazed door shutters of approved brand or as directed by the Engineer in charge. |
| 26 | Providing and fixing Aluminium glazed windows of approved brand or as directed by the Engineer in charge. |
| 27 | Centring and shuttering including strutting, propping etc and removal of form work for : a) Foundation, footings, bases of columns etc. and mass concrete. |
| 28 | b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 29 | c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 30 | d) Lintels, beams, girders, bressumers and cantilevers etc. |
| 31 | e) Column, pillars, posts and struts etc. |
| 32 | 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand). |
| 33 | Providing two coats of acrylic water based wall putty/ wall filler of Asian Paits/ Berger/Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and externalafter removing all the loosely adhering material from the wall/ ceiling surface with thehalp of emery stone, putty blade or wire brush, moistening the wall with the help ofsufficient quantity of clear water as specified and directed by the department. |
| 34 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 35 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 36 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 37 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
| 38 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade. |
| 39 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 40 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.b) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone shingle 20 mm nominal size). |
| 41 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.a) M20 (1 cement : 1.5 coarse sand : 3 stone shingle 20 mm nominal size). |
| 42 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone shingle 20 mm nominal size). |
| 43 | Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size). |
| 44 | Brick work with best available local bricks in plinth and in Superstructure in cement mortar 1:4 (1 cement : 4 fine sand). |
| 45 | Reinforcement of RCC work including bending, binding and placing in position complete. |
| 46 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately). |
| 47 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing inposition and applying a priming coat of approved steel primer using structural steel etc.as required. a) In stringers, treads, landings etc. of stair cases, including use of chequered platewherever required, all complete |
| 48 | Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement. a) 40 mm thick |
| 49 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete c) Size of Tile 800x800 mm |
| 50 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry.( for WC & Bath floors&dado) |
| 51 | Chequered terrazzo tiles 22 mm thick with marble chips of sizes upto 6mm in floors on 25mm thick bed mortar 1 : 3 (1 cement : 3 coarse sand) jointed with neat cement slurrymixed with pigment to match the shade of the tiles including rubbing and polishingcomplete:a) Light shades using white cement |
| 52 | Neat Cement Punning |
| 53 | Providing and fixing Aluminium glazed door shutters of approved brand or as directed by the Engineer in charge. |
| 54 | Providing and fixing Aluminium glazed windows of approved brand or as directed by the Engineer in charge. |
| 55 | Centring and shuttering including strutting, propping etc and removal of form work for :c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 56 | d) Lintels, beams, girders, bressumers and cantilevers etc. |
| 57 | e) Column, pillars, posts and struts etc. |
| 58 | 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand). |
| 59 | Providing two coats of acrylic water based wall putty/ wall filler of Asian Paits/ Berger/Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and externalafter removing all the loosely adhering material from the wall/ ceiling surface with thehalp of emery stone, putty blade or wire brush, moistening the wall with the help ofsufficient quantity of clear water as specified and directed by the department. |
| 60 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 61 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 62 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 63 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
| 64 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade. |
| 65 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 66 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.b) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone shingle 20 mm nominal size). |
| 67 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.a) M20 (1 cement : 1.5 coarse sand : 3 stone shingle 20 mm nominal size). |
| 68 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone shingle 20 mm nominal size). |
| 69 | Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size). |
| 70 | Brick work with best available local bricks in plinth and in Superstructure in cement mortar 1:4 (1 cement : 4 fine sand). |
| 71 | Reinforcement of RCC work including bending, binding and placing in position complete. |
| 72 | Providing and fixing Aluminium glazed door shutters of approved brand or as directed by the Engineer in charge. |
| 73 | Centring and shuttering including strutting, propping etc and removal of form work for :c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 74 | d) Lintels, beams, girders, bressumers and cantilevers etc. |
| 75 | e) Column, pillars, posts and struts etc. |
| 76 | 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand). |
| 77 | Providing two coats of acrylic water based wall putty/ wall filler of Asian Paits/ Berger/Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and externalafter removing all the loosely adhering material from the wall/ ceiling surface with thehalp of emery stone, putty blade or wire brush, moistening the wall with the help ofsufficient quantity of clear water as specified and directed by the department. |
| 78 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 79 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 80 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 81 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade. |
| 82 | Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design. |
| 83 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 84 | Providing and fixing a pair of white vitreous china foot rest of standard pattern for squatting pan WC.(250mmX130mmx30mm) |
| 85 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.Size 100mm Dia |
| 86 | U-PVC pipes (working pressure 4 kg / sqcm) Single socketed pipe 110 mm dia. |
| 87 | Providing and fixing sand cast iron heel rest sanitary bend a) 100 mm dia |
| 88 | Providing and fixing on wall face asbestos cement soil, waste and vent pipes including jointing with spun yarn soaked in bitumen and cement mortar1:2(1cement:2coarse sand) complete. a) 100 mm dia |
| 89 | Providing and laying cement concrete 1 : 5 : 10(1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. a) 100 mm dia SW pipes |
| 90 | Providing and fixing kitchen sink including making all connection excluding cost of fittings. a) White glazed fire clay sink size 600x450x150 mm |
| 91 | Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design. a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg). |
| 92 | Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers. |
| 93 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required. |
| 94 | Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand).b) 100 mm diameter pipe |
| 95 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls a) 15 mm nominal bore (Internal) |
| 96 | b)20 mm nominal bore (External) |
| 97 | Providing and fixing brass stop cock of approved quality.b) 20 mm nominal bore(external) |
| 98 | Providing and fixing brass bib cock of approved quality.15 mm nominal bore |
| 99 | Providing ,Fixing ,commissioning & testing of 1 H.P. 1 Phase pump(SWJ 1 ) including control Panel and all accesories or as directed by Engg. i/c |
| 100 | Providing fixing best quality PVC sintex 1000 ltrs catpacity |
| 101 | Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m. |
| 102 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. |
| 103 | Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering. |
| 104 | Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring an shuttering in:b) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level.(Wall) |
| 105 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone shingle 20 mm nominal size). |
| 106 | Reinforcement of RCC work including bending, binding and placing in position complete. |
| 107 | Brick work with best available local bricks in plinth and in Superstructure in cement mortar 1:4 (1 cement : 4 fine sand). |
| 108 | 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand). |
| 109 | Neat cement punning. |
| 110 | Centring and shuttering including strutting, propping etc and removal of form work for :c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 111 | Manufacturing and supply of wooden coat made of A class Timber including,moisquito stand and finishing with varnish of approved brand or as may be directed by Engineer incharge.Medium size. |
| 112 | Dining Table with 4 no chairs finishing with varnish or as directed by the engineer in charge |
| 113 | Manufacturing and supply of wooden coat made of A class Timber including,moisquito stand and finishing with varnish of approved brand or as may be directed by Engineer incharge.Single size. |
| 114 | Provide Pvc Chair |
| 115 | supply of Wooden Table with drawer including finishing of approved brand or as may be directed by Engineer incharge.single size.(Size 40 \\" x 28 \\") With Drawer. |
| 116 | Filter 30 Ltr Capacity |
| 117 | Cement |
| 118 | Aggregate 40 mm |
| 119 | Aggregate 20 mm |
| 120 | Aggregate 10 mm |
| 121 | Bricks |
| 122 | Steel Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender