Tender For Emergency Repair At R Area, Above Cabins Entrance, Besides Female Medical Ward And Allied Works To Prevent Excessive Seepage At District Hospital, Kalimpong, Gta
Tender Value
5.43 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
9 days left
EMD
10872
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalimpong → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Emergency Repair At R Area, Above Cabins Entrance, Besides Female Medical Ward And Allied Works To Prevent Excessive Seepage At District Hospital, Kalimpong, Gta
BOQ
| Sl. No. | Item Description |
| 1 | Emergency Repair at Ramp area, Above Cabins entrance, besides female medical ward and allied works to prevent excessive seepage at District Hospital, Kalimpong, GTA |
| 2 | Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. |
| 3 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. (a) In ground floor including roof |
| 4 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m |
| 5 | Removal of rubbish,earth etc from the working site and disposal of the same beyond the compound in conforming with the Muncipality/Corporation Rules for such disposal,loading into trucks and cleaning the site in all respect as per direction of EIC |
| 6 | Cement Concrete with graded stone ballast (40 mm size) excluding shutteirng. with N.B. Variety Stone metal. (1:3:6) proporaton |
| 7 | 125 mm thick brick work with 1st class brick's in Cement mortar (4:1) |
| 8 | Dressed wood work in post, plate, battens etc. fitted & fixed complete (excluding the cost of bolts only, but including the cost of nails, screws etc.) Sal : Local - Doors (DW) -: Chowkhats |
| 9 | Supplying , fitting and fixing M.S.Clamps for door & window frame made of flat bend bar, end bifurcated with necessary screws etc. by cement concrete 1:2:4 as per direction. 40 mm x 6 mm, 250 mm length |
| 10 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. 75mm. X 60mm. X 3.15mm. |
| 11 | Panel shutter of door and window, as per design (each panel consisting of single plank without joint ), including fitting & fixing the same in position but excluding the cost of hinges and other fittings. 35 mm thick shutters with 19 mm thick panel of size 30 to 45 cm |
| 12 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: With continuous plate base (Hexagonal/ Round rod). 125 mm grip x 10 mm dia rod. |
| 13 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete. 250mm x 19mm dia. Bolt |
| 14 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: 150MM X10 MM |
| 15 | Priming one coat to timber or plastered surface, with ready mixed primer of approved quality, including smoothening surface by sand papering etc. |
| 16 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On timber or plastered surface : With other than hi-gloss of approved quality- Two coats (with any shade except white) |
| 17 | Labour for Chipping of concrete surface before taking up Plastering work. |
| 18 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement morter 20 mm thick plaster |
| 19 | Neat cement punning about 1.5 mm thick in wall dado, window,sills floor,drain etc. |
| 20 | M.S. structural works in columns, beams etc. with simple rolledstructural members (e.g. joists, angle, channel sections conformingto IS: 226, IS: 808 & SP (6)- 1964 connected to one another withbracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming toIS: 816- 1969 & IS: 1995 using electrodes of approved make andbrand conforming to IS:814- 2004, haulage, hoisting and erectionall complete. The rate includes the cost of rolled steel section,consumables such as electrodes, gas and hire charge of all tools andplants and labour required for the work including all incidentalchages such as electricity charges, labour insurance charges etc |
| 21 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colourcoated on both side) steel sheet work having minimum yieldstrength of 550 Mpa of trapizoidal profile of approved make(excluding the supporting frame work) fitted and fixed with55 mm & 25 mm self tapping screw, EPDM Washer 16 mmdia & 3 mm th. washer etc. complete with 150 mm end lapand one corrugation minimum side lap. |
| 22 | Aluminium sheet ridging fitted with self tapping screws, EPDM washers etc complete.(Minimum 225mm end lapping) 300 mm lapping each way |
| 23 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. 110 mm |
| 24 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. |
| 25 | Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification |
| 26 | GST @18% |
| 27 | Cess @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender