Tender For Making Of Office-Chamber Of Divisional Accountant & Account Section With Aluminium Partition Walls And Rearrangement Of Existing Partition Walls Of The Offices Chamber Of The Sub-Divisional Officers And The Executive Engineer(Sdp) At River
Tender Value
2.07 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
6 days left
EMD
4151
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nadia → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Making Of Office-Chamber Of Divisional Accountant & Account Section With Aluminium Partition Walls And Rearrangement Of Existing Partition Walls Of The Offices Chamber Of The Sub-Divisional Officers And The Executive Engineer(Sdp) At River Research Institute , Mohanpur, Nadia Under Irrigation & Waterways Directorate.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour/natural) matt finished conforming to IS:1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed/certified make and brand as per direction of Engineer-In Charge. (Payment will be made on finished length of the work).(A) In 10-12 Micron thickness Annodizing filmII) Colouredj) Fixed partitions. (Unsupported length of vertical member more than 1.5mtr .or both ends of vertical member restrained but panels more than 0.9 Sq.m) |
| 2 | i) Top , bottom & side member. |
| 3 | ii) Intermediate member. |
| 4 | iii) Glazing clip. |
| 5 | Labour charge for fabrication and installation of composite door,window, partitions made from annodized extruded alloy aluminium sections for the following units:(D) Partly glazed and partly panelled partition or fixed glazing made of extruded and anodised alloy aluminium sections, fabrications after cutting to proper shape and size,drilling and aligning fitted with inbuilt locking arrangement cutting the glass /board (prelaminated/ particle /block) to requisite shape and size moulding the edges fitted and fixed glazing clips and dry set neoprine /EPDM gasket, along with all other necessary arrangements for fixing the partition towalls, floors, beams, columns polysulphide sealant for water proofing if necessary complet ein all respect as per drawing and specifications and direction of the Engineer in charge. The rate includes the hire charge of all tools and plants, adhesive, joineries suchas screw, fastener but excluding the cost of extruded aluminium sections,EPDM gasket, glass, board, glazing clips, locking arrangement, etc.I) For partitions using section of size:a) 63.50 mm x 38.10 mm |
| 6 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. iv) 5mm thick coloured / tinted / smoke glass. |
| 7 | Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al./MS frame work with GIbrackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet ) with CP angles, cleats and strainless Steel screws forming groves atthe periphery of ACP panel. Such grooves filled with foamand silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction ofEngineer-in-charge. (Mode of payment is on finished surface area of ACP).(a) 3mm thick (0.25mm Al.+2.5mm LDPE +0.25mm Al. PVDF coating) |
| 8 | Supply of Un-Skilled daily labour for rearrangment of existing partition wall work. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender