Tender For Providing And Installation Of Submersible Pumping Machineries (No-3) For Saburbandh Water Supply Scheme Under Bankura Mechanical Division Phe Dte, Dist :Bankura.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Jul 2026
1 days left
EMD
10000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bankura → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Installation Of Submersible Pumping Machineries (No-3) For Saburbandh Water Supply Scheme Under Bankura Mechanical Division Phe Dte, Dist :Bankura.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, delivery of clear water vertical wet type submersible pump suitable for bore well conforming to IS:8034(and as amended threreafter) with standard MOC for potable clear cold water and BEE 3 star ( Minimum) rated capable with a continuous rated-2 pole suitable wet type vertical squirel cage induction motor conformoning to IS: 9283(and as amended threafter) suitable for operation in AC Three phase 415V, 50Hz(category B motor) a) Discharge-22 M3/Hour at head of 29 Mtr(Materials should be supplied as per requirement of site, no extra material will be received by the department.) |
| 2 | Supply, delivery and storage at site 80 mm dia M.S. E.R.W. column pipe, 4.85 mm thickness with both end threaded including one socket and threaded protector painted with anti corrosive paint |
| 3 | a) 1.5 Mtr. Long |
| 4 | b) 3.05 mtr long |
| 5 | Supply, delivery at site M.S fabricated T/W top cover (flange type)suitable for 200 mm dia tube well made of 12 mm thick M.S. plate with centrally welded 80mm dia M.S Socket(Heavy type) and 40 mm dia socket at side for 40 mm dia G.I. Pipe (for cable entry) & fitting fixing the heavy type G.I pipe specials & nut bolt including welding all joints and supplying all 80 mm dia shorts pieces, bends. flanges, sockets, enlargers etc. & 40 mm dia G.I. pipe, bend, union, joints, elbows as required for complete the job as per direction of EIC |
| 6 | Supply & delivery of M.S. suspension clamp with necessary nuts, bolts & washer etc suitable for 80mm dia pipe |
| 7 | Supply & delivery at site & storage CIDF single door swing check Non rising type NRV as per IS:5312 Part – I, (for individual L/L Pump) DN 80 mm (P.N.–1.0) rating (for Submersible delivery header) |
| 8 | Supply and delivery at site 10 sq. mm, 3 core, 1.1 kv, XLPE insulated Ar. Al. conductor cable Confirming IS:7098 (Part-1) 2011 Make: Havells/Finolex/Netco/Gloster/ Polycab(Materials should be supplied as per requirement of site, no extra material will be received by the department.) |
| 9 | Supply and delivery at site 2.5 sq. mm, 3 core, 1.1 kv, copper conductor cable Confirming IS:694 Make: Havells/Finolex/Netco/Gloster/ Polycab(Materials should be supplied as per requirement of site, no extra material will be received by the department.) |
| 10 | Supply of 32 mm dia PVC pipes & fittings Schedule 80( medium duty) conforming to ASTMD-1785 and threaded to match with GIPipes as per IS:1239(Part - I). Make-PHED approved Make |
| 11 | For laying of cable by cutting sand at riverbed and laying through underground trenching and ramming the shifted soil as per direction of EIC. |
| 12 | Laying 10 sq. mm xlpe cable in the underground trench in single tier formation (horizontal) the trench size : 450 mm width x 760 mm up to average depth with brick protection on the top of each cable with 8 nos. bricks per Mtr. including filling the space between the bricks and cables and also the trench with shifted soil, leveling up and restoring surface duly rammed. |
| 13 | Installation & commissioning of all items mentioned as in 1 to 5 including supply of all erection items, as required for installation of Submersible pumping machineris all valves, including supplying all necessary items i.e- nut & bolt wather rubber gasket, with painting, jointing of cables termination cable soketing by suitable rated sockets With Supplying fixing compression type gland complete with brass gland, brass ring & rubber ring for dust and moisture proof entry of XLPE armoured cables for 3 core 10 sq mm and Finishing of theend of 3 core 10 sq mm armoured cable by crimping method incl supplying and fixing solderless socket (Dowels make ) tapes, anticorrosive paste & jointing materials ( for kiosk box and panel ) for complete the installation as per Hydraulic standard & IE rules in compliance by engaging skilled technician all complete as per Technical specification and upto entire satisfaction of EIC. |
| 14 | Add: 18% GST |
| 15 | Add: 1% Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender