Tender For Upgradation Renovation Of Cfc 1St Floor Partition With Allied Works Panchayat Sarar Block Chenani Under Pri Capex Budget Fy26-27
Tender Value
2.42 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
13 days left
EMD
4840
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Renovation Of Cfc 1St Floor Partition With Allied Works Panchayat Sarar Block Chenani Under Pri Capex Budget Fy26-27
BOQ
| Sl. No. | Item Description |
| 1 | Add cost of CIB |
| 2 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing inCement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 3 | Providing and fixing aluminum work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/appropriate Zsections and other sections of approved make conforming to IS: 733 andIS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides withrequired EPDM rubber / neoprene gasket felt etc. Aluminum sectionsshall be smooth, rust free, straight, mitred and jointed mechanicallywherever required including cleat angle, Aluminum snap beading forglazing / panelling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-Charge (glazing,panelling and dash fasteners to be paid for separately.)Anodized aluminum (Anodized transparent or dyed to requiredshade according to IS:1868, minimum anodic coating of grade AC 15) |
| 4 | Providing and fixing aluminum work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/appropriate Zections and other sections of approved make conforming to IS: 733 andIS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides withrequired EPDM rubber / neoprene gasket felt etc. Aluminum sectionsshall be smooth, rust free, straight, mitred and jointed mechanicallywherever required including cleat angle, Aluminum snap beading forglazing / panelling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-Charge (glazing,panelling and dash fasteners to be paid for separately.)Anodized aluminum (Anodized transparent or dyed to requiredshade according to IS:1868, minimum anodic coating of grade AC 15) |
| 5 | Providing and fixing glazing in aluminum door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasket etc.complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.)With float glass panes of 5.0 mm thickness (weight not lessthan 12.50 kg / sqm) |
| 6 | Providing and fixing 12mm thick prelaminated particle board flatpressed three layer or graded wood particle board (conforming to IS:12823 Grade-I type-II) in panelling fixed in aluminum doors, windowsshutters and partition frames with C.P. brass / stainless steel screws etc.complete as per architectural drawings and directions of engineer-incharge.Pre-laminated particle board with decorative lamination on bothsides. |
| 7 | Providing and fixing aluminium beading |
| 8 | Providing and fixing aluminum tower bolts ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed torequired colour or shade with necessary screws etc. complete150x10 mm |
| 9 | Providing and fixing aluminum die cast body tubular type universal hydraulicdoor closer (having brand logo with IS: 3564, embossed on the body, doorweight upto 35 kg and door width upto 700 mm), with necessary accessoriesand screws etc. complete : |
| 10 | Providing and fixing aluminum hanging floor door stopper, ISI marked,anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparentor dyed to required colour or shade with necessary screws etc. completeTwin rubber stopper |
| 11 | Providing and fixing aluminum tubular handle bar 32mm outer dia,3.0mm thick & 2100mm long with SS screw etc. complete as perdirection of Engineer-in-charge. Anodized (AC 15)aluminum tubular handle bar |
| 12 | Providing and fixing Brass 100mm mortice latch and lock with 6leverswithout pair of handles (best make of approved quality) for aluminiumdoors including necessary cutting and making good etc. complete. |
| 13 | Finishing walls with acrylic smooth exterior paint of required shade onNew work (Two or more coats applied @ 1.67 liter/10sqm over andincluding priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 14 | Providing and fixing brass curtain rods of wall thickness 1.25 mmwith twobrass brackets fixed with brass screws and wooden plugs etc. wherevernecessary complete. 20 mm diameter. |
| 15 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C (CPWD DSR [E&M]2018) |
| 16 | Wiring for light /power plug with 2×4 sq mm FRLS PVC insulated copper conduit for single core cable in surface/recessed medium class PVC conduit with modular switch, modular plate suitable GI box alongwith1No 4 sq mm FRLS insulated copper conductor single core cable etc as required Group C |
| 17 | MCB Distribution board |
| 18 | SPN 63 AMP |
| 19 | SPN 5A to 32AMP |
| 20 | Supplying and fixing Ceiling fan of 1200mm sweep.Make Havells,Syska or eqvt |
| 21 | Supplying and fixing LED TS tube light of 20 W.Make Havells,Syska or eqvt (LMR |
| 22 | Supplying and fixing LED TS tube light of 12 W.Make Havells,Syska or eqvt (LMR |
| 23 | Carriage of sand |
| 24 | Carriage of bajri Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender