Tender For Remodelling Of Office Chamber Of Worthy Chief Engineer, Pw (R&B) Department Central Kashmir Alongwith Pantry Retiring Room And Personal Section, At Engineering Complex Rajbagh Srinagar.
Tender Value
17.84 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
4 days left
EMD
35680
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Remodelling Of Office Chamber Of Worthy Chief Engineer, Pw (R&B) Department Central Kashmir Alongwith Pantry Retiring Room And Personal Section, At Engineering Complex Rajbagh Srinagar.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Jul-2026 | Addendum | Other | 31-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing water proof BWR ply wood (ply to ply) ISI marked including cost of nails adhesive etc. complete at all places 12 mm thick |
| 2 | Providing & fixing in position HDHMR Panelling of 18mm thickness , in 25 to 35 mm thick moulded planks in approved colours, texture &finish.The Planks shall have 10mm wide, 25mm deep grove to fit in panels (incl. framework of 12 mm thick ply board underneath fixed with steel nails, wood adhesive etc) The panels shall have profiled interlocking system locked in place all complete as per direction of the Engineer in-charge. |
| 3 | Painting with Deco paint of approved shade over HDHMR including preparing surface by way of P/L acrylic/deco putty including sand papering. The surface shall be prepared to the smooth finish and then applying two or more coats of Deco paint with sprayer complete job as directed at site and upto the satisfaction of EIC |
| 4 | Providing and laying 12mm thick AC5 HDF laminate flooring (V5)in specified size, pattern and as per drawings in Flooring/band on existing levelled flooring/screed free from Dirt, Oil & Grease with approved adhesive & underlay foam cushion including wooden skirtings,including bidding,door tea corner profile etc. complete as per specification, drawing and to the satisfaction of Engineer In-Charge |
| 5 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): KD wood |
| 6 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35mm |
| 7 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 8 | Providing and fixing of Kitchen cabinets / Amirah / made of 19 mm thick (BWR)ply wood in sides, shelves and front shutters and back with 6mm thick (BWR) ply wood including lining of front shutters with mica mirror polished as per approved drawings all over the surface including all Brass hardware fittings, glazing and drawer telescopic channels etc. wherever required & locking arrangements (As per the directions of EIC) all inclusive complete job.(Face area of the cabinet will be measured for payment) including all carriages:- 450mm to 600mm |
| 9 | Providing, fabricating and fixing Ashoka Emblem made from high-quality brass sheet of approved design and size, including embossing/casting, cutting, shaping, welding, grinding, buffing, polishing, protective lacquer coating, necessary brass/stainless-steel fasteners, clamps, templates, scaffolding and fixing securely over the wall, complete in all respects as approved and directed by the Engineer-in-Charge. |
| 10 | Providing and fixing of brass finished alphabets made of Stainless Steel 304 SS height as per engineer incharge , 150-200 mm width incl. all necessary fittings and fixtures , scafolding , drilling of hole and fixing of fastners and ACP Sheet minimum 3mm thick base including the cost of lights on the backside of each letter (1.5W) complete in all respects as per the design and pattern by the EIC. (CHIEF ENGINEER PW(R&B)D CENTRAL KASHMIR) |
| 11 | S/F of heating points with FRLS multi stand copper 2.55 sq/incl. channels, nails battern incl. 15/5 Amp socket / switch complete job |
| 12 | S/F of lighting points with 1.5mm sq. FRLS multi stand copper wire incl. 25mm PVC pipe/channel/nails/batten/angle holder/sq. block 6 Amp switch & PVC etc. modular switches complete job |
| 13 | Engagement of plumber for removing old damaged sanitary items i.e bibcocks, washbasin, WC, unrinals incl, removing of all necessary fittings and stacking complete job. |
| 14 | Engagement of electrician fordifferent works as per the directions of EIC at site complete. |
| 15 | Engagement of labours for cleaning and shifting of utilities as per the directions of EIC at site complete. |
| 16 | Engagement of Carpenters for easing out of doors and windows as per the directions of EIC at site complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 31, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender