Tender For Construction Of Bore Well Near Cricket Stadium Dalohard Marhama, Block Bijbehara Panchayat Halqa Marhama C
Tender Value
6.03 Lakhs
Estimated cost
Bid Submission
08 Aug 2026
9 days left
EMD
18200
Bank guarantee accepted
Document Fee
100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Bore Well Near Cricket Stadium Dalohard Marhama, Block Bijbehara Panchayat Halqa Marhama C
BOQ
| Sl. No. | Item Description |
| 1 | Drilling of 125 mm diameter tube well by air rotary drilling rig unit suitable for lowering of MS casing of 125mm diameter in suitably drilled bore hole as per specifications laid down in IS 2800 (Part-I) with up to date amendments. The job is to be done in all kinds of soils, boulder, rocks, collapsible strata, saturated soils, artisan conditions by ODEX/DTH attachments and exploration of ground water by tapping sufficient aquifer zones. The job includes the cost of shifting of drilling accessories, tools, bits, casing shoe, consumables like fuel, lubricants, skilled and unskilled labours and other unforeseen items. Development of tube well with backwash method with air compressor of minimum capacity 1000 CFM (300 PSI air delivery system) with suitable arrangements till well is thoroughly developed in all respects as per the directions of site engineer. |
| 2 | Supplying, assembling, lowering and fixing in vertical position in bore well ERW Fe 410 mild steel screwed or socketed/plain ended 125 mm nominal dia (MS 125 mm) casing pipe conforming to IS: 4270:2001 with upto date amendments of reputed & approved make, including painting of outside brand and manufacture including required transportation hire & labor charges, fitting/welding and accessories all complete for all depths as per direction of engineer in charge. The casing pipe is to be slotted as per the site requirement and as directed by site engineer. |
| 3 | Providing, fitting and commissioning of single phase submersible type pumping unit along with allied jobs. Complete details of the job are as under: • P/F/T and commissioning of single phase pumping equipment with following specifications: Discharge = 800-600 GPHHead = 80 m - 100 mMotor Rating = 2 HPMake = Reputed The pump motor is coupled together with a steel coupling. The job includes lowering of the submersible pump equipment. It includes P/F of MU-G/Panel starter suitable for motor rating and as decided by site Engineer. |
| 4 | Providing and fitting of 32 mm dia. GI (B-class) column pipe. The pipe is properly threaded at both ends and the length of each pipe is 3 m. The pipe is provided and fitted with GI sockets for jointing purpose. |
| 5 | Providing and fitting of 7.5 KVA single phase automatic voltage stabilizer (Dry type). The job also includes P/F of copper wire of suitable gauge required for connecting of incoming and outgoing connections alongwith allied accessories viz three pin top, MCB etc, input voltage 90 - 150 V. Output Voltage 220 V. |
| 6 | Providing and Fitting of submersible cable of 4.0 sq. mm for connecting pumping unit. |
| 7 | Providing and Fitting of MS holding clamps of required dia. fabricated out of 10 mm thick MS Plate with nuts and bolts. |
| 8 | Providing and Fitting of reducer 32mm – 25 mm dia. The job also includes P/F of 32mm dia GI bend MOC: B class including Well Cap of suitable dia. |
| 9 | Providing and Fitting of 05 mm Steel wire rope for holding submersible pumping unit. |
| 10 | Providing/Laying of Plain Cement Concrete block of size 4ft×4ft×1ft in 1:3:6 mix to give adequate strength to act as a sanitary block for the well and to grout the hand pump assembly in order to make it robust to resist shock load observed while pumping. The job includes Providing/laying of PCC edges of 4\\"×4\\" in 1:3:6 mix and P/L of cement plaster in 1:4 mix to the above block to give aesthetically good appearance. Cost on account of shuttering, strutting, centering, curing etc is included in the scope of work. In case the suitable space for the above specification is not available, the surface area is to be adjusted accordingly. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender