Tender For Provision Of Chimneys For 27 Offrs Md Accn And Provn Of Garden Lights At Various Location At Fazilka Mil Stn
Tender Value
14.52 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
16 days left
EMD
29100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Fazilka → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Chimneys For 27 Offrs Md Accn And Provn Of Garden Lights At Various Location At Fazilka Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Supply and installation of wall/ceiling mounted Electrical Kitchen Chimney 60cm min with intelligent auto-clean BLDC motor, digital display, LED touch panel, filterless, powerful sunction, motion sensor, speed level not less than 9 , in-built Child lock & Gesture control, air flow not less than 1400 CMH, oil collection tray suitable for 3-5 burner stove single phase , 230 volt, 50 Hz including making suitable hole on wall/ceiling for duct hose size 150mm and make the good surface as existing, including vent cowl cover suitable for duct hose complete all as specified and directed by Engr-in-Charge. |
| 2 | Supply and fixing of flexible aluminium duct hose with stainless steel cowl cap/ ventilation cap of size min 150mm (ID) for exhaust of chimney on wall/ ceiling including all fitting i.e clamp , nut & bolts etc complete all as specified and directed by Engr-in-Charge. |
| 3 | Material and labour for concealed Point wiring for one socket out let 15/16 Amps point controlled by one switch (on independant board) (using red, black and green colour wires as colour coding) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc., including Pressed steel powder coated sunken terminal box suitable for modular switch socket (Min 50mm deep and 1.6mm thick sheet, suitable size ) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches / socket, including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3), including fixing of switch, socket complete all as specified and as directed. (switch, socket shall be measured and paid separately under appropriate item of BOQ). |
| 4 | Supply and fixing for modular Socket outlet multipurpose type 6/16 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ. |
| 5 | Supply and fixing for modular switch 6/16Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ. |
| 6 | Supply, laying, Jointing and testing in trenches or fixing to wall/pole or passing through pipe and and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor including making good to all disturbed surfaces/flooring/tiling/ road to match with existing specifications, including luges and joint the cable properly complete all as specified and directed. |
| 7 | 6 Sqmm 4 core |
| 8 | 10 Sqmm 4 core |
| 9 | 25 Sqmm 4 core |
| 10 | M & L for boring hole across the Road/plinth/hard standing by trench less technology method suitable for 100mm bore pipe for 0.4 mpa working pressure for cable passing without damaging Road / Plinth /Floor with 80mm GI pipe complete all as specified and directed. |
| 11 | Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth for foundations of poles, struts, stays etc. or laying underground cable etc. in soft/loose soil, & getting out complete all as specified and directed by Engineer-in-Charge. |
| 12 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engineer-in-Charge |
| 13 | Removal of excavated surplus material to a distance n. exc. 50 mtr away in layer n. exc. 25cm from the starting point all as direcet by Engr-in-Charge. |
| 14 | M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for coping around poles , including necessary form work finishing even and smooth without using extra cement , all as specified and directed. |
| 15 | Supply and laying double wall corrugated pipe (DWCP), Non-metallic, resistance to compression : type 450, resistance to impact; normal, resistance to bending: pliable, resistance to external influence; ingress protection: IP 67, resistance against corrosion: without protection, resistance to flame propagation: non flame propagating, conforming to IS-16205 (part-24) 2017 including necessary jointing material i.e snap fit coupler with rubber ring, sealing plug, tees, bend, angel bend etc for passing electrical cable complete all as specified and directed by Engr - in charge.(a) DWC Pipe dia 77/63 |
| 16 | Supplying, fixing, testing & commissioning intergal decorative Water proof 9/10 Watt LED bollard light with opal acrylic with IP-65 protection with inbuilt driver, colour temperature of 5700 K of graphite grey powder coated finish type including PCC base 1:2:4 with specified size complete all as specified and directed by Engr-in-Charge. |
| 17 | S&F Post top lantern Light of 45 Watt capacity made of housing epoxy powder coated pressure die cast aluminium spigot and lid cover with graphite grey finish and clear acrylic cover, IP65 protction, suitable mounting for 40mm GI pipe to be fitted into the column / piller with all fitting and wiring, design or fitting etc complete all as specified and directed by Engr -in- Charge. |
| 18 | S&F Post top lantern Light of not less than 20 Watt capacity Hexagonal/ pentagonal shape of housing epoxy powder coated pressure die cast aluminium spigot and lid cover with graphite grey finish and clear acrylic cover, IP65 protction, suitable mounting for 40mm GI pipe to be fitted into the column / piller with all fitting and wiring, design or fitting etc complete all as specified and directed by Engr -in- Charge. |
| 19 | S&F Post top lantern Light multi colour of not less than 15 Watt capacity made of housing epoxy powder coated pressure die cast aluminium spigot and lid cover with graphite grey finish and clear acrylic cover, IP65 protction, suitable mounting for GI pipe to be fitted into the column / piller with all fitting, conduit and wiring. Design or fitting etc complete all as specified and directed by Engr -in- Charge. |
| 20 | Supply and install decorative MS tabular poles 4 meter long having minimum thickness of 3mm complete with MS base plate of size 250x250x10 mm thick at bottom suitable for foundation bolt, the poles have diameter1 mtr bottom base 114 mm, 2mtr centre pipe 76mm, 1 mtr top pipe 60mm with single arm bracket 50 watt oval shape hanging LED light. pole is pure polyester based powder coated with high corrosion resistence and chemical chromatised protection. Also available with multiple coats of weather resistance polyyurethane paint in various colors. the service window at the lower part of the pole contains connector, cut -outs, MCB. including all fittings i.e connecting cables, nut & bolts, PCC base 1:2:4 depth of PCC shall be upto 1/6 of pole height, earth work, coping including and numbering of poles etc complete all as specified and directed Engr-in-Charge. |
| 21 | S&F 40 mm bore Galvanised iron tube medium grade with all fitting fixed for garden light, piller light, including paint in various colours, made suitable holes for cable passing, cutting suitable size of pipe according to ligths etc or concealed complete to walls and ceiling or laid in floors, brenches complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Supply, Install, testing & commissioning factory made Out door type dust and vermin proof Feeder pillar LT panel board cubical double door hinged type compartmentalized of suitable size 415 volts, AC 50 Hz fabricated of CRCA sheet 3 mm thick machine pressed and angle iron frame 50mm x 50mmx 6mm grouted in PCC 1:2:4 type B1 (20mm grade stone aggregated) powder coated inside and outside complete including 4 poles aluminium bus bar of suitable size mouned on porcelain insulators and enclosed in chamber made out od 2mm thick CRCA sheet machine pressed and connection from incoming and outgoing electric cable with suitable size thimbles / lugs cable gland with open able shutters on both side and comprising of the following :-(a) Busbar aluminium - 160 Amps- 04 Nos(b) MCCB 4 Pole 100 Amp, 415V, 16KV with thermal magnetic release -01 Nos (Incomer)(c) Outgoing : MCB TPN 63 Amp, 415V, with thermal magnetic release-04 Nos(d) MCB TPN 20-40 Amp, 415V, with thermal magnetic release-01 Nos(e) Digital auto timer swith three phase.(f) Voltmeter (0-500V) digital type 3ph with selector switch -01 Nos(g) Ammeter (0-50 Amp) digital type 3ph with CT's and selector switch(h) Indication lamp with LED type - Set of three |
| 23 | S&F SMC Polycorbonate junction box size 140x140x95 mm, 430 volts to be concealed in coping/ wall / piller and making good to all disturbed surfaces, including bus bar, MCB, all accessories, wiring, conduit, bottle type luges etc complete all as directed by Engr- in- charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender