Tender For Addition Alteration To Certain Offices Of Age (B/R-I) Of Hq Wac At Subroto Park
Tender Value
44.09 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
2 days left
EMD
88180
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Certain Offices Of Age (B/R-I) Of Hq Wac At Subroto Park
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone masonary, built in cement mortar or cement lime mortar including all quions,arches, pillars, ec, but excluding aslar facings,dresse stone work and percast conrete articles. |
| 2 | M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6 m mean redius, built in cement mortar 1:6 complete all as specified & directed. |
| 3 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 4 | M&L for rendering 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement all as specified. |
| 5 | M&L Rendering 15mm thick in cement mortar 1:6 on brick work or concrete surface and finished even and smooth without using extra cement and complete all as spd and directed. |
| 6 | M&L for Rendering 10mm thick on ceiling in CM 1:3 on fair faces of brick work or concrete surfaces complete all as specified & dirccted. |
| 7 | M&L for preparation of new plastered surface of walls and applying two coats of OBD over a coat of primer complete all as specified and directed. |
| 8 | M&L for Preparing surface of new plastered surface and applying two coats of acrylic emulsion extterior paint over coat of primer, tint as approved by GE in any pettern to match existing surface. |
| 9 | M & L for three coat of white wash on new surface of ceiling including preparation, complete all as specified and directed. |
| 10 | Dismantling wrought iron or mild steel as in purlin, roof trusses work of any description not otherwise provided for complete all as specified & directed. |
| 11 | S&F Rolled sections (Fe 410-W-Gde-E- 250 quality A) as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified & directed. |
| 12 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified & directed. |
| 13 | S&F Mild steel bolts dia of neck exceeding 12 but n exc 20 mm purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long complete all as specified & directed. |
| 14 | M&L for Preparation of new steel Surfaces, Priming with red oxide with one coat of synthetic enamel paint of any description, over 10cm in width or girth,not otherwise described, complete all as specified & directed. |
| 15 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed. |
| 16 | M&L for PCC type D2 (1:4:8) 100 mm thick in cement concrete using 40mm graded aggregate, complete all as specified & directed. |
| 17 | M&L for laying Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 18 | M&L for Soling with broken boulders or quarried stone, inter stices filled, surface formed androlled and consolidated to required gradient and camber of thickness 100mm complete all as specified & directed. |
| 19 | M& L for Machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60mm thickness, M-35 grade using grey cement & no pigment complete all as specified & directed. |
| 20 | M&L for sand cushioning 25 mm thick below paver block complete all as specified and directed. |
| 21 | Material and labour, Gunniting to existing RCC Chajja, facia, parapet, beams, landings and similar RCC members after removing all loose concrete & preparations of surface, application of derusting chemical such as Dr Fixit Rust Remover or equivalent, welding additional bars/welded steel wire fabric if found necessary, priming reinforcement bars with a coat of zinc primer of coating not less than 40 micron, provision of bonding agent with bonding material like Dr Fixit bonding agent and repair to external RCC structure with slurry light and steel/ply form work and shortcrete concrete of mixed 1:3:1 (one part of cement, three part of coarse sand and one part of 10mm and down aggregate) of minimum 50mm thick incl plastering 10 mm thick in CM mortar 1:3 all as specified in IS 9012-1978 (all priming and bonding epoxy based paint shall be of Dr Fixit epoxy zinc primer or equivalent) etc complete all as specified and directed, as below:- Note(s) : 1. The rates include for necessary formwork and scafolding etc. 2. Reinforcement and welded steel wire fabric will be measured and paid separately. |
| 22 | Demolition of cement Concrete of any description and in any position including any type of roof treatment , PCC padding, lime concrete etc, complete all as specified and directed. Note: All demolished material / debries will be disposed off out side the Airforce station Nal with out any extra cost to the contractor. He should arrange dumping site to dispose off material. |
| 23 | Roughening surface of old concrete floor by picking sweeping clean and washing down with water to remove dust etc and including brushing neat cement slurry with 3 Kg/Sqm in roofs, complete all as specified & directed. |
| 24 | M&L Cement concrete 1:3:6 type C1, (using 20 mm graded stone aggregate)mixed with water proofing compound pidi proof LW @ 200ml per 50Kg cement as per manufacturers instructions as in roof paddding, mass concrete finishing as required gradient cement concrete surface even and smooth without using extra cement complete all as specified and directed.Note;- WPC shall be measured and paid separately in the relative item. |
| 25 | M & L APP based polymeric membrane minium weight 3 Kg/Sqm and minium 3 mm thick, reinforced with polyster non wove fabric (wt. not less than 150 gms/Sqm ) laid by torch forced application over a coat of bitumen 85/25 grade applied hot @ 1.20 Kg/Sqm laid over and including a priming coat using bituminious primer @ 0.40litre/ sqm, complete all as specied and direct. |
| 26 | M&L for cutting grooves in brick wall for inserting APP membrane and other works size of grooves 75mm wide and 65mm deep and shapping horizontal face of grooves and making good with cement mortar 1:3 or PCC 1:2:4 complete all as specified & directed. |
| 27 | M&L Cement concrete 1:2:4 type B0,(using 12.5 mm graded stone aggregate) as in roof kerbs or mud stops, on junction of parapet, coping etc cement concrete surface finished even and smooth without using extra cement complete all as spd and directed. |
| 28 | Supply only Liquid water proofing compound ISI marked, complete all as specified & directed. |
| 29 | M&L for repair to broken sides/bottom of roof projection , facia by all means i.e. either by cement plaster of any thickness or by cement concrete 1:1.5:3, type A-0, (using 12.5 mm graded stone aggregate) etc, using chicken wire mesh to reinforce & form work as required complete all as specified and as directed by the Engineer-in-Charge. |
| 30 | Taking up or down 15 mm dia steel tubing & connections including clearing for refixing or removal to store, complete all as specified & directed. |
| 31 | Taking up or down 20 mm dia steel tubing & connections including clearing for refixing or removal to store, complete all as specified & directed. |
| 32 | S & F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors. |
| 33 | S & F 20mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors. |
| 34 | Dismantling water tanks any type of capacity Exc 250 but n.exc 500 liters, complete all as specified & directed. |
| 35 | S&F 500 litre capacity Rotational moulded polyethylene water storage tank, white colour, triple layers, conforming to IS, cylindrical vertical with closed top, hoisted and fixed in position complete all as specified and as directed. |
| 36 | Dismantling un serviceable water tanks any description exc 500 but not exc 1000 Liters complete all as specified and as directed by the Engineer-in-Charge |
| 37 | S&F for 1000 Litres capacity rotational moulded polyethylene water storage tanks, triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed. |
| 38 | Supply and fixed in repair 20 mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified & directed by Engineer-in-charge. |
| 39 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, complete all as specified & directed. |
| 40 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified & directed. |
| 41 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore including necessary clumping complete all as specified and directed by Engineer-in-Charge. |
| 42 | S&F PVC (SWR) bends any radius 110mm bore, complete all as specified & directed by Engineer-in-Charge. |
| 43 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and removal complete all as specified and directed. |
| 44 | M & L non-skid, ceramic coloured tiles (7 to 8mm thick) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors, set and jointed in cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed 15mm thick average in cement mortar 1:6 complete all as specified & as directed. |
| 45 | M & L for joint free glazed coloured ceramic coloured tiles of 300mm x 450mm x 7mm thick on vertical surface of walls set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles, over and including 10mm thick rendering in CM 1:4, complete all as specified and directed by engr-in charge. |
| 46 | M & L Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & as directed. |
| 47 | Supply and fixing in repairs long body Bib taps,chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe complete all as specified and directed. |
| 48 | Cutting chases, pining in making good to facings where required & pointing in cement mortar1:3 to ends etc or edges of landings, steps cills,sunshades, shelves,lintels,etc and cutting chases for concealed water tubing and making good,cutting n.exc. 10cm girth in brick walls complete all as specified & directed. |
| 49 | Supply & fixing in repair 15 mm bore Stop valves,chromium plated, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fixed as in repairs complete all as specified and directed. |
| 50 | Supply and fixing in repair 15mm dia PVC connection with brass nut, of length 450mm,fixed as in repairs, complete all as specified and directed. |
| 51 | Supply and fixing as in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC bend for required squat pattern etc, set with concrete and making good to floor, fixed as in repairs complete all as specified & directed. |
| 52 | Supply & fixing as in repair vitreous china wash hand basin, white flat back, size 300mm x 450mm including pillar tap 15mm dia chromium plated with capstan head with long screwed shanks and fly nuts, and brass chromium plated waste coupling 32mm dia complete all as specified & directed. |
| 53 | S&F as in repairs 100 mm dia mild steel chromium plated grating with or without waste pipe hole as per requirement complete all as specified and directed. |
| 54 | S&F in repair tubular towel Rail 20 mm dia of brass chromium plated complete all as specified and directed. |
| 55 | S&F in repair soap dish vitreous China white, approximate size 160x 160x90mm , any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 56 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm widewith chromium plated bracket guard and railing 60cm long complete all as specified & directed |
| 57 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed |
| 58 | S & F in repairs vitreous china padastal pattern, \\"EWC\\" white with connection to trap, and to flushing pipe anti-syphonage pipe and including plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated & Health faucet 15mm dia pipe etc. complete all as specified and directed. |
| 59 | Taking down chowkhats with shutter without taking off shutters from the frames (area n. exc. 1.50 sqm each) incl making good the disturbed surfaces complete all as specified & directed. |
| 60 | Supplying & fixing in opening solid PVC door frame of size 50mm x 47mm made out 5mm plain colour PVC sheets re-inforced with MS tube but wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet, complete all as specified & directed by Engineer-in-Charge. |
| 61 | M & L for Factory Made Solid PVC Moulded Door Shutter 30 mm thick having 19mm thick celuka ply sandwitched between 2mm thick PVC Sheet on both face(color and design of sheet approved by Engr-in-charge),supplying & fixing in frame at site and including taking down chowkhats with shutter as per specification & drawing complete all as specified & directed. |
| 62 | Supply and fixing Mild steel butt hinges medium weight , clod rolled, 75mm, ISI marked, complete all as specified & directed. |
| 63 | Material & Labour barrel tower bolts aluminium anodised extruded section of size 100 mm complete all as specified & directed. |
| 64 | Supply and fixing aluminium fabricated type extruded handles of size 100mm complete all as specified & directed. |
| 65 | S&F as in repair Steel window 1.25mm thick box type ERW hollow P section of each frame size 60mmx25mm double rebated comprises of glazed & gaused Skelton shutter ERW section 50mmx20mm & 1mm thick with one openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mmx25mm and 1.25mm thick with following fittings welded to the frame shutter :- i) Hold fast 150mm long mild steel flat iron 12x3 mm made to shape- 04 Nos per window ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf. iii) MS tower bolt 100mm long 2 No per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 Nos per leaf. v) 10mm square Guard bar @ 10 cm c/c.(vi) Two coat of Synthetcitc enamel paint over one coat of primer (vii) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in glazed / gazed skelton shutter of window(viii) 3mm thick sheet glass, ordinary quality and with oil putty in Square n. exc 0.5 sqm in each pane fixed in glaxed / gazed skelton shutter of window.(ix) Fabrication and fixing arrangements as per specification including taking down, cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed. |
| 66 | M&L for Providing and fixing as in repair factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware[Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified & directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lorpayment purpose.) (A) Area not exceeding 2.00 sqm each incuding the following items Door Espag,Lever Door Handle,Standard Cylinder,Centre Striker, 3D Hinge Striker, Drainage, Glazing Bridge, Silicon Sealant Complete all as specified & directed |
| 67 | M&L for Providing and fixing factory made UPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 68 | Supply & fixing Flush shutters,30 mm thick 2nd class hardwood with solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified & directed. |
| 69 | Suppluy & fixing 30 mm thick 1st class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified & directed. |
| 70 | Supply and fixing Mild steel butt hinges medium weight , clod rolled, 150mm, ISI marked, complete all as specified & directed. |
| 71 | Supply and fixing aluminium fabricated type extruded handles of size 150mm complete all as specified & directed. |
| 72 | Material & Labour barrel tower bolts aluminium anodised extruded section of size 200 mm complete all as specified & directed. |
| 73 | Supply and fixing 200 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified & directed. |
| 74 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60(Suspension Grade), 2, 4, or 6 raised panel design calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 75 | S&F butt hinges heavy weight 100 mm long mild steel fixed with steel screw complete all as specified and directed by Engr-in-Charge. |
| 76 | Demolition of concrete cement (un-reinforced) in ground floor & paving n.exc 15 cm thick (below or above ground level), complete all as specified and directed. |
| 77 | M&L for 1:3:6 type C2 using 40mm graded aggregate as in floors, 75mm thick as in plinth protection, complete all as specified & directed. |
| 78 | M&L for Cement Concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling& mass concrete for chequered Tiles etc, complete all as specified & directed. |
| 79 | M&L chequered cement concrete tiles 20cm x 20cm x 20-22 mm thick , set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15 mm thick screed bed in CM 1:6 over and including 50 mm thick PCC 1:4:8 Type D-2(40mm graded stone aggregate) all as specified and directed by engr-in-charge. |
| 80 | S&F anodised aluminium section Powder coated (Minimum Thickness of powder coating 50 micron) weighing 0.55Kg/m for frames of doors, windows, ventilators with one or more rebate including joining cleat for fixing etc complete all as specified. |
| 81 | S&F anodised aluminium door shutter using Powder coated (Minimum Thickness of powder coating 50 micron) aluminium section with top rail, middle rail, stiles of size 83.5mmx44.45mmx1.49mm and bottom rail of size 114.3mmx44.45x1.49mm as in door shutters including necessary jointing cleats, glazing clips, rubber neoprene packing , handles 2 Nos in each door, hinges, anodised aluminium snap beading screws, all necessary builders hardware etc complete all as specified and directed. |
| 82 | S&F Sheet glass, 4.8mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified & directed. |
| 83 | S&F 9mm thick Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium frame workcomplete all as specified & directed. |
| 84 | S&F as in repair angle iron as in posts and struts in fencing including cutting tops to shape as directed , drilling holes notching for wire etc, flat iron fillets(for securing wire mesh etc)including all necessary drilling ,boltion or riveting etc and similar work conforming to Fe-290 Gde E-165, complete all as specified & directed. |
| 85 | S&F as in repair MS Framed steel work as in door or gates of angle or other section with gusset plate rail braces , complete drilled for fixing of steel sheeting or other covering. doors, etc to be prepared for for hanging or sliding with and including either hooks and hinges or steel hanging door fitting and hanging and fixing complete all as specified and directed (of Fe-290 Grade E-165) |
| 86 | M&L Providing and injecting chemical emulsion for Post Constructional antitermite treatment along external wall where the apron is not provided along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as spd and directed. |
| 87 | M&L Providing and injecting chemical emulsion for Post Constructional antitermite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as spd and directed. |
| 88 | M&L Providing and injecting chemical emulsion for Post Constructional antitermite treatment At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as spd and directed. |
| 89 | Taking down of old /unserviceable kitchen cabinet / Cupboard incl all fixture and fittings. For measurement superficial area in elevation will be measure. |
| 90 | S&F factory made 18mm-19mm thick PVC foam board of density 600kg/cbm manufactured by an ISO-900-2008 certified company one side prelam and other side plain for kitchen cabinet shutter including machine pressed PVC edge banding in matching colour over all exposed edge Complete all as specified and directed. |
| 91 | S&F factory made 18mm-19mm thick plain PVC foam board of density 600kg/cum manufactured by an ISO-900-2008 certified company for Shelf / Partitions / Drawer Complete all as specified and directed. |
| 92 | S&F 100 mm size Brass handle, complete all as specified and as directed |
| 93 | S&F 38mm size Stainless Steel Piano hinges complete all as specified and as directed. |
| 94 | M &L for ABS body magnetic latches of size 50mm, complete all as specified & directed. |
| 95 | Excavation in soft/Loose soil in trenches not exceeding 1.5 metre wide / manholes area n exc 10sqm on plan and depth not exceeding 1.5 metre and getting out complete all as specified and directed. |
| 96 | Excavation in Soft/Loose soil in trenches not exceeding 1.5 meter wide /manholes area n exc 10sqm on plan and depth exceeding 1.50 Metre but Not exceeding 3.00 metre in depth and getting out complete all as specified and directed. |
| 97 | Demolition and breaking up drain pipes of150mm dia (Salt glazed ware, AC or Reinforced concrete) set incement mortar complete all as specified and directed. |
| 98 | M&L Concrete bed to drain pipe 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate, complete all as specified and directed. |
| 99 | Supply, laying and jointing 200mm bore inner dia double wall corrugated HDPE pipes SN8 in any length including all fittings & jointings with elastomeric rubber rings & couplers/ other jointing material as per manufacturers instruction, in trenches complete all as specified and directed. Note : Excavation and earthwork shall be measured and paid for separately |
| 100 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with andprovision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) Complete all as specified & directed. |
| 101 | S&F Stainless steel sink with draining board,made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets,connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified & directed. |
| 102 | Demolition of reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified & directed by Enge-in -Charge. |
| 103 | M&L for formwork to sides and soffits of slabs complete all as speified & directed. |
| 104 | M&L for M25 Graded reinforced cement concrete (design Mix) in lintel beams (using 20mm graded stone) aggregate complete all as specified & directed. |
| 105 | M & L for Mild steel bars 8mm dia cut to length, bent to shape required, including cranking, bendingspirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 106 | M & L machine cut Granite slab 15 mm thick fixed as in for steps, pillars, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white/coloured cement to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as specified & directed. Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish all as specified. |
| 107 | M & L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners not paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made. |
| 108 | Supply & fixing in false ceiling with Semi perforated 12mm thick acoustical false ceiling, (fire retardant and sound absorbent) micro regular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595x595 mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 99% NRC 0.50 to 0.75 as per IS 8225:1987, Non-combustible as per BS 475 (Part 4) -1970 and light code description unit rate No 429 Sub Head : 26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120 grams per sqm including both sides) comprising of maint -T runners of size 15x32mm of length 300mm, cross -T of size 15x32 of length 600mm to form grid module of size 600x600mm , suspended from ceiling using galvanised mild steel items (galvanising @80 grams per sqmm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-Shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on perimeter wall /partition with the help of plastic rawl plugs at 450mm centre to canter and 40mm long dry wall screws. The work shall be carried out as per specification, drawing and as per direction of the Engr-in charge. |
| 109 | Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge. |
| 110 | M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade (FRLS),ISI-694 marked in and including heavy duty, PVC concealed conduit after cutting,chasing the wall etc and making good of disturbed surface, including all accessories etc, heavy duty ISI marked, including mild steel sunken boxes with earth dolly duly powder coated suitable for modulater plates of required size, covered with modular plates, suitable for modular switches, sockets etc including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) (FRLS) single core cable as earth continuity conductor to common earth and connecting to earth dolly. For one light point controlled by one SP switch. ( Note- Modular Switch and sockets will be measured and paid seperately). |
| 111 | All as per item No 110 but for one fan/exhaust fan and wall mounted fan point controlled by one SP switch. |
| 112 | All as per item No 110 but for one bell point controlled by one No bell push |
| 113 | All as per item No-110 above but for one 3 pin socket out let, 6 Amps on same board |
| 114 | All as per item No-110 above but for one 3 pin socket out let, 6 Amps on Independent board |
| 115 | All as per item No 110 above but with 2.5 Sq mm cable for Independent board one 3 pin 15 Amps socket outlet including Single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FRLS cable for continuous earth wire 2.5 sqmm FRLS all as specified and directed by Engineer-in-Charge. ( Only one 15 Amp point will be in one circuit) |
| 116 | S & F Modular switch 1 way 6A, 1 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge. |
| 117 | S & F Modular Socket, 6A -3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge. |
| 118 | S & F Modular switch 1 way 16A ,1 module suitable for 240 Volt AC complete all as specified and directed by Engr-in- Charge. |
| 119 | S & F Modular Socket, 16A -3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge. |
| 120 | S & F Electronic modular Fan Regulator rotary flush step type 120 watt, 2 module , 240 volt 50 Hz AC complete compatible with BLDC fans. |
| 121 | S & F Bell push Modular flush type 6 Amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge. |
| 122 | S&F electric ding dong bell, 230 volt AC, single pole complee all as specified and as directed by Engrineer-in-Charge. |
| 123 | Supply and fixing of ceiling roses, surface bakelite 65x50mm 3 terminals , PVC/Polycarbonate, isolated body fixed on PVC round block complete all as specified and directed by Engineer-In- Charge. |
| 124 | Taking down old unsv MCB DB of any size, complete all as specified & directed. |
| 125 | Supply and fix MCB DB SPN 8 way double door with 200 amp rated bus bar neutral link, made out of CRCA mild steel sheet 230 Volt, horizontal type complete all as specified and directed by Engineer -in- Charge. |
| 126 | Supply and fixing in repair MCB SPN 240V, 10 KA 'B' curve and current carrying capacity 40 A, in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge. |
| 127 | Supply and fixing in repair MCB SP 240V, 10 KA 'B' curve and current carrying capacity 6 to 32 A, in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge. |
| 128 | Supply and fix as in repair LED batten luminaire surface mounted ,4 feet system wattage of not less than 20 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 4000 to 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 Lumens/watt, filcker free (Ripple less than 5%) and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed with 5 years of replacement warranty on fittings complete all as specified and directed. Make Crompton cat Part No CCS-100-20-65-HL2-DP-NWH / Havells cat Part No LHEBFOPN137W020 / Surya cat Part No SLE BT 20 G1 |
| 129 | S&F as in repair LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp. Fixture should have minimum efficiency at system level >=100 lumens/Watt, life of fixture not less than 50K Hrs,Ripple<5%,UGR<19,minimum Surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 THD<10% @ 240v Ac. An operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and directed. Make Crompton cat Part No CCS-103-10-65-SL-DP-NWH / Surya cat Part No SLE BT 10 IL / Havells cat Part No LHEBFOPN137W020 |
| 130 | Supply and fixing as in repair white LED luminaire 600 mm x 600 mm, 35/36 watt, 220V AC recesed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.Make Havells cat part No VENUSNEOHE2X2R36WLED830PIRSENSOR / same type in Philips / Bajaj / Crompton/WIPRO |
| 131 | Supply, Installation, testing and commissioning of 1200mm sweep BEE 5 star rated, Ceiling fan with Brush Less Direct Current (BLDC) Motor, Class of insulation : B, power factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery not less than 230 CMM,350 RPM (tolerance as per IS:374-2019), THD less than 10%,including remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nuts bolts, washers, temperature rise =75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V, 50 Hz, single phase AC supply complete all as specified and directed by Engr-in-Charge. |
| 132 | S&F Exhaust fan 300 mm sweep, copper winding,metal body, four metal blades BEE approved/ISI marked, air delivery shall not be less than 1600 CMM at 1400 RPM, mounted in suitable opening arrangement with louvers shutters, suitable for operation on 240 volt, single phase, 50 cycle per second, AC supply and connecting up using flexible cord wire 3 core using PVC flexible conduit from ceiling rose or connector to fan to cover PVC cable fixed in position as recommended by manufacturer complete all as specified and directed. |
| 133 | Supply and fix exhaust fan made of sturdy Engineering PVC complete with louvers, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed by Engr-in-Charge. |
| 134 | Supply and fixing LED 40 watt post top IP 65,energy saving ,long life ,aesthically designed with symmetrical light distribution high power LED as source and connecting up with 3 core flexible copper conductor cable including PCC work complete all as specified and directed. Make-Crompton of Cat part No LPTO-40-WW-M or equivalent make in Havells / Surya / Philips Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 18, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender