Tender For Periodical Services To Certain Otm And Md Accommodation At Kalimpomg Mil Stn Under Ge 867 Ews
Tender Value
39.99 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
17 days left
EMD
79980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalimpong → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Periodical Services To Certain Otm And Md Accommodation At Kalimpomg Mil Stn Under Ge 867 Ews
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation of old plastered/unplastered white washed surfaces of walls and applying one coat of white washing complete all as specified and as directed by Engr-in-charge. |
| 2 | M&L for preparation of old plastered/unplastered white washed surfaces of Ceiling and applying one coat of white washing complete all as specified and as directed by Engr-in-charge. |
| 3 | M&L for preparation of old plastered surfaces of wall and applying one coats of oil bound distemper complete all as specified and directed. |
| 4 | M&L for Scrapping of existing treatment on walls and appying 1 mm thick layer wall care putty (Birla white or equivalent) and applying two coats of oil bound distemper over acoat of priming coat after preparation of wall surfaces complete all as directed. |
| 5 | M&L for preparation of old plastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed. |
| 6 | M&L for preparation of old decorated surfaces of walls and applying one coats of cement based paint complete all as specified and directed. |
| 7 | M&L for preparation of old decorated surfaces of walls and applying two coats of cement based paint complete all as specified and directed. |
| 8 | M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth etc and applying one coat of synthetic enamel paint complete al as specified and directed by engr in charge. |
| 9 | M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth etc and applying two coat of synthetic enamel paint complete al as specified and directed by engr in charge. |
| 10 | M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth for CGI sheet in roof etc and applying one coat of synthetic enamel paint complete al as specified and directed by engr in charge. |
| 11 | M&L preparing old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete al as specified and directed by engr in charge. |
| 12 | M&L preparing old painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete al as specified and directed by engr in charge. |
| 13 | M&L preparing old treated wooden surfaces of any description over 10 cm width or girth and applying one or more coat of french polishing complete all as specified and directed by engr in charge. |
| 14 | M & L for preparation of old cement concrete surfaces applying one coat of synthetic enamel paint over one coat priming coat complete all as specified and directed. |
| 15 | M&L for preparing old painted brick, stone, concrete, asbestos cement or plaster surfaces of any description over 10 cm width or girth and applying one coat of plastic emulsion paint including wall care putty not less than 1 mm thick complete all as specified and directed by engr in charge. |
| 16 | M&L for complete removal of the existing treatment from old painted brick, stone, concrete, asbestos cement or plaster surfaces of any description over 10 cm width or girth and applying two coats of plastic emulsion paint over one coat of primer with and including wall care putty not less than 1 mm thick complete all as specified and directed by engr in charge. |
| 17 | M&L for preparation of old plastered decorated surfaces and applying one coat of premium Exterior emulsion paint complete all as specified and approved by GE. |
| 18 | M&L for preparation of old plastered decorated surfaces and applying Two coat of premium Exterior emulsion paint complete all as specified and approved by GE. |
| 19 | Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 20 | M&L Rendering in cement mortar (1:6) 10 mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement. |
| 21 | M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces cement mortar (1:3) on concrete surface as in ceiling/chajja and RCC surfaces , to be finished even and smooth (without using extra lime or cement)complete all as specified. |
| 22 | M&L Rendering in cement mortar (1:4) 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement. |
| 23 | M&L preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over 2mm thick wall care putty (Birla white or equivalent) complete all as specified and directed. |
| 24 | M&L preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed. |
| 25 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 26 | M&L for writing letters or figures (Blocks,Roman or Italic or Indian) 15 cm high with thick paint complete all as specified and directed by engineer in charge. |
| 27 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones |
| 28 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed. |
| 29 | S&F 4 mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed. Please Enable Macros to View BoQ information |
| 30 | S&F 4 mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender