Tender For Addition Alteration To Building No P-90 And P-91 At Af Stn Bkt
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Aug 2026
11 days left
EMD
74500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Building No P-90 And P-91 At Af Stn Bkt
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed. |
| 2 | Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth, for foundation etc and getting out in soft/loose soil complete all as specified and directed. |
| 3 | Excavation over area , not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 4 | M&L for PCC (1:4:8) type-D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete, sub base as in floors complete all as specified and directed. |
| 5 | M&L for RCC (Design Mix M-25) using 20mm graded stone aggregate as column, pillars,piers,posts and struts including all necessary form work complete all as specified and directed. |
| 6 | M&L for Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed. |
| 7 | M&L for Brick work with fly ash old size bricks, Brickwork in arches with selected uncut bricks with wedge shaped joint built in CM (1:4) complete all as specified and directed. |
| 8 | M&L Brick work with fly ash old size bricks, straight or curved to any radius in half brick thick walls, built in CM (1:4) complete all as specified and directed. |
| 9 | Returning Filling in,including spreading, levelling, watering and well ramming in layers, not exc 25 cm in soft/loose soil complete all as specified and directed. |
| 10 | Removing excavated material n exc 50 m and depositing where directed at level n exc 1.5m above the starting point complete all as specified and directed. |
| 11 | M&L for RCC (Design Mix M-25) using 20mm graded aggregate) as in,foundation including all necessary form work including foundation beams,pinth beams,bases for columns,etc, and mass concrete complete all as specified and directed. |
| 12 | M&L for RCC (Design Mix M-25) using 20mm graded stone aggregate as in beams , cantilevers, lintels over 1.5 m span including all necessary form work complete all as specified and directed. |
| 13 | M&L for RCC (Design Mix M-25) using 20mm graded stone aggregate as in slab supported on walls, beams and columns in floors , roofs, landings, balconies, canopies, deck slabs and in shelves and the like including all necessary form work complete all as specified and directed. |
| 14 | M&L for RCC (Design Mix M-25), using 20mm graded aggregate) as in Chajjas including all necessary form work complete all as specified and directed. |
| 15 | S&F MS TMT bars,10 mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed)not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 16 | Ditto all as per item No. 15 above but 6 mm to 8 mm dia complete all as specified and directed. |
| 17 | Ditto- all as per item No 15 above but 5 to 10mm dia as in stirrups & links etc. complecte all as specified and directed. |
| 18 | M&L for 10 mm thick screed bed or bedding layer in CM (1:3) mixed with water proofing compound 200ml/bag of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed. |
| 19 | M&L for high performance hybrid plyurea slastomeric waterproofing coating cold applied of spray/ brush applied,samrtcare ulton liquid membrance 1.5kg/sqm with an elongation of 600% and tensile strength of 12.6 N/sqmm as per ASTM D2370,crack bridging ability of 3.5mm as per ASTM C1305,shore a hardness of min 75 as per ASTM D2240.The system smartcare includes final base preparation as per site requirement,epoxy primer application and applying smatcare Ultron or approved equivalent in two coats at a coverage of 1kg/sqm etc complete as per manufacturer specification including removal of old waterproofing system and repairing and cleaning the surface complete all as specified and directed. |
| 20 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 21 | M&L for rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar (1:4) rendering is to be finished even and smooth without using extra cement mixed with water proofing compound complete all as specified and directed (WPC shall be paid seperately) |
| 22 | M&L for rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar (1:6) rendering is to be finished even and smooth without using extra cement complete all as specified and directed. |
| 23 | M&L for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over and including one coat of wall care putty with Mechanical Means and one coat of primer complete all as specified and as directed. Note: Primer and Distemper to be carried out through air less spray machine (Mechanical Means).Make:-Asian paints (Tractor UNO)/ Berger (Easy clean)/ Nerolac Paints (Beauty Acrylic Smooth). |
| 24 | M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of resistant primer by airless spray machine (mechanical means) of any colour complete all as specified and directed . Make:- Asian Paints Ltd/ Berger(Duracem Extra)/ Indigo Floracem. |
| 25 | M&L for rendering 10 mm thick on fair faces of brick or concrete surface ceilings, in cement mortar (1:3), rendering is to be finished even and smooth without using extra cement complete all as specified and directed. |
| 26 | M&L for two coats of white wash on ceiling on newly plastered surfaces including preparation of surfaces with air less spray machine (Mechanical Means) complete all specified. |
| 27 | M&L for hard core of broken stone or boulder of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 28 | M&L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floors,finished even and fair complete all as specified and as directed. |
| 29 | M&L for 25mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate) as in floor and finished rough to receive the floor tiles etc complete all as specified and directed. |
| 30 | M & L for Machine cut Kota stone slab pre-polished (Minimum size shallbe 550mm x 550 mm as in floor,slabs,shelves and floor 18 to 20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing complete,laid over and including screed bed or bedding layer of 20 mm thick in cement mortar (1:6) complete all as specified and directed. |
| 31 | M&L for Machine cut Kota stone 16 to 18 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing set and jointed in neat cement slurry and pointed in white or colour cement to match, the shade/colour of tiles over and including 10 mm thick rendering in cement mortar (1:4) as in riser of steps,skirting,dado & vertical surfaces complete all as specified and directed. |
| 32 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 33 | M&L for Non - skid Vitrified double charge joint less coloured tiles size 600mm X 600mm X 8-9mm thick , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15 mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 34 | M&L for mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed. |
| 35 | S&F in pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed. |
| 36 | S&F in Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 37 | Dismantling of old ceiling boards (fibre pulp, insulation, etc) of any thickness including cover fillets/snap grid complete all as specified and directed |
| 38 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel @ 457 mm centre to centre complete all as specified and directed. |
| 39 | S&F GI hangers 4 mm dia (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 mm x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and directed. |
| 40 | M&L for 8 mm thick Seamless calcium silicate ceiling made out of 1800mm x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately under respective item of Sch 'A' complete all as specified and directed. |
| 41 | S&F in jointless finish with jointing compound and jointing tape as per m a n u f a c t u r e r instructions complete all as specified and directed. |
| 42 | M&L for glazed ceramic coloured tiles in vertical surface of size 300mm x 450mm x 7mm thick, set and jointed in neat cement slurry and pointed white or coloured cement to match the surface over and including 10 mm thick 14 CM (1:4) complete all as specified and directed. |
| 43 | M&L for Jet south black granite slab work 18 to 20mm thick (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types and including 15mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in coloured cement to match exesting the surfaces and half nose moulding (bull nosing) etc, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 44 | M&L for Jet south black granite slab work 18 to 20mm thick (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types and including 15mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in coloured cement to match exesting the surfaces and half nose moulding (bull nosing) etc, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender