Tender For Deposit- Deposit Work Of Thiruvananthapuram Corporation - Project No. So 1988/26 - Providing & Installing Booster Pump In Kachani Ward -Pipeline Work
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Jul 2026
5 days left
EMD
14072
Bank guarantee accepted
Document Fee
1245
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Deposit- Deposit Work Of Thiruvananthapuram Corporation - Project No. So 1988/26 - Providing & Installing Booster Pump In Kachani Ward -Pipeline Work
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, Installation and commissioning of Online pressure Boosting system & allied works |
| 2 | OD303521/2025-2026:Supply and Installation of 5 HP variable head (20-27m) centrifugal type booster pump, 3 phase,50 Hz. with a Discharge range of 850- 480 Lpm with size of 80mm x 65mm.The rate is including, cost of pump, cost of motor, cost of approved panel board, cost of starter, Aluminium cable from panel board to starter and starter to Motor, cost of Capacitor, necessary suction pipe, foot valve, Non return Valve and necessary PVC valves, suitable Earthing as per IE rule, Erection charges including foundation, base plate, cost of cement sand and metal, trail run and commissioning etc. complete as per the direction of Engineer InCharge. Along with onsite Warranty for at least 1 Year. |
| 3 | OD303513/2025-2026:Installation of Shelter for pump and fittings using 12mm Cement boards for a shelter having length of 6 feet, width of 4 feet and height of 6 feet. Required Structural support to be done by Square tubes for installation of cement boards as side walls and roof, Supplying and installation of shingles roofing as per the direction of the departmental officers. Including cost of materials, welding charges, labour charges etc complete. |
| 4 | OD303519/2025-2026:Automation of Pump by supplying and installing Universal automatic panel, Dry run preventer, Overload protection, Low/High voltage protection, Phase preventer, Timer unit, Pressure Switch etc. As Directed by The Engineer In Charge. Along with Onsite Warranty of at least 1 Year |
| 5 | OD303516/2025-2026:Supply and Installation of Pressure tank of 25L capacity with all fittings |
| 6 | OD303515/2025-2026:Cost for Engaging Wire man and helper for taking 3 phase electric connection from KSEB byinstallation of necessary switches, laying of cables, fixing of safety devices, providing provisionfor earthing, providing fuse etc. as per the statutory requirements. |
| 7 | OD303522/2025-2026:Providing and fixing in position industrial-type pressure gauges with gunmetal/brass valves in pipe lines including all specials etc complete |
| 8 | OD303520/2025-2026:Providing and fixing 110mm PVC ball valve with all accessories in existing line as per direction of Engineer In Charge |
| 9 | OD303514/2025-2026:Supply and Installation of 100mm NRV in pipe lines as per site requirement |
| 10 | OD303512/2025-2026:Supply of 110mm pvc 90 degree bend |
| 11 | OD303517/2025-2026:Supply of 110mmx110mm PVC Tee |
| 12 | 100.98.1008:Engaging Coolie. |
| 13 | 13.50.3:Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works |
| 14 | 13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 15 | 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 16 | 13.53.1:Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to given an even shade:New work (two or more coats) including coat of approved steel primer but excluding a coat of mordant solution. |
| 17 | OD303518/2025-2026:Labelling and sticker works for the pump house as per the direction of Departmental officers |
| 18 | 100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil. |
| 19 | 100.9.9:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 110 mm nominal outside diameter pipes. |
| 20 | 100.98.237:Supply of PVC Pipe, 10kg/cm2, 110mm Dia. |
| 21 | OD337075/2025-2026:PVC specials such as bends, elbow, flanges, tail piece, union, end cap, CID, CIR joints etc complete as per site condition |
| 22 | OD337076/2025-2026:Supply of 110mm PVC 45 deg bend |
| 23 | OD337077/2025-2026:Supply of 110mm PVC end cap |
| 24 | Providing Valve Chamber |
| 25 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil |
| 26 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 27 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 28 | 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 29 | 4.3.2:Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. |
| 30 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 31 | OD303524/2025-2026:Supplying CI MH cover with frame (heavy duty Type) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender