Tender For Installation Of Colored/Led Lights In Nandgaon Town.
Tender Value
83.17 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
5 days left
EMD
4.16 Lakhs
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mathura → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Installation Of Colored/Led Lights In Nandgaon Town.
BOQ
| Sl. No. | Item Description |
| 1 | Supply & fixing of 6 Mtr. Pole: - Decorative casting aluminum pole having cast Aluminium base height 1340mm and Minimum bottom size 504mm is reducing to top 153mm. The entire base is casted in gravity casting weight not less than 40Kgs. The bottom section of the pole 3000mmx140mmx3.0mm thick and top ribbed section of the pole 3000x114mm dia with base plated 300x300x12mm welded at the bottom of the pole. Pole is having a service window at bottom comprising four way connector and MCB for loop-in & loop-out arrangement. Pole is primer coating and polyurethane painted in dual shape antique paint with final coat of PU clear. DFT not less than 90 micron. Suitable for mounting drop down fixture including foundation and Monkey Protection, completee in all respect. Design as approved by MVDA. PSR |
| 2 | Supply & fixing of Double Arm Bracket: - 1000mm long double arm bracket, 900mm over-hang (both Sides) bracket is provided for suspension of decorative lorence Drop Down Fixture. Bracket is made of Mild steel pipe with decorative embellishment With Monkey Protection. Design as approved by MVDA. PSR |
| 3 | Supply and fixing of Florence-DD Fixture: - Ornamental 90 to 120 Watt LED Drop Down luminaire made of aluminum hosing duly powder coated/PU Painted with PU Paint/ frosted diffuser for high illuminance/glare free lighting. MCPCB having high lumen having LED’s are mounted on aluminium heat sinks.Design as approved by MVDA With 05 years on site warranty. PSR |
| 4 | Supply & fixing of 7mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect,as per direction and approval of E/I. 641 SOR 2018 |
| 5 | Supply of Solar AIO, Indigenous Single piece High pressure Die cast Aluminium housing, IP65 & IK08, suitable for OD 50/60mm bracket, having Min 5000 lumens & 30 W suitable for 24hrs (2 Nights) Autonomy and its backup calculation sheet shall be approved by Engineer-In-Charge. Dimming Profile• From Dusk – First 05hours sensor enabled with 30% brightness level• Next 05Hours sensor disabled and fixed at 30% Brightness level• Next 2hours/dawn- Sensor enabled with 30% brightness level.Maintenance Lithium phosphate Battery capacity min 384watt hour/30AH 12.8V &shall be of fresh manufactured battery (Not re-used cells) Battery Temp range -10-+50℃ and panel capacity min 60Wp, CRI >=70, Efficacy 180lm/W. Life class of LED System 50000hrs@L70, Manufacturing unit shall be of OEM self or other shall be UL approved manufacturing unit for better quality. LED Make - CREE/NICHIA/LUMILEDS, CE Certified, charger efficiency >90% and standards IEC62109-1, IEC61547, CISPR15, IEC62093, IEC61347-2-13, EN50530, IEC62384 The PV module should be made up of crystalline silicon solar cells \\"Mono-Crystalline\\" BIS of battery & Panel, Test reports IES LM79-19, LM80, IP & IK test reports from NABL approved Lab only. (BIS/ISO approved make) with onsite product warranty and operation and maintatenence of 5 year .O&M included 24 hours (2 Nights bettery backup and optimum lux level through the O&M period) priodic cleaning of solar panel minimum once in a month or as per direction of E/I to maintainance optimum lux leval of lights. Costomisation of solar light regarding motion sensor and dimming profile as per direction of E/I. PSR |
| 6 | Supply and fixing of plain or pin type copper tin plated cable socket (lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the E/Ic. PWD SOR 2018 S.I. No. 504-D16 Sq. mm. |
| 7 | Making suitable earthing of street light pole with 2.5m long 20mm dia. Ms rod with 7/16 SWG GS Wire in 15mm dia. 2 meter long GI pipe duly clamped with 2 nos. of clamps and winding on pole including cost of labour and T&P etc.required for proper completion. PSR |
| 8 | Numbring of Pole with 6' circule Yellow paint base and number with black paint ,as per direction and approval of E/I. PSR |
| 9 | Supply and laying of 16 sqmm 4 core aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PWD SOR 2014 S.I. No. 501-I |
| 10 | Supply and fixing of 4 sqmm 2 core flat twin \\"AL\\" cable complete with labour T&P an dall taxes as per direction by E/I. PSR |
| 11 | S&F of 100 Amp. 415 V metal clad TPN HRC type switch fuse unit complete with HRC fuse on angle iron bracket complete in all respect... PWD SOR 2018 S.I. No. 328 Cat-B |
| 12 | Supply and burring of safe earthing electrode T-19 Zn-Zinc coated, length up to 2000 mm., outer pipe 48.4 mm. x 3.2 mm., inner pipe 26.9mm.x2.6 mm., terminal dia. 12 mm., coating 80-100 micron filled with crystallinc conductive mixture (CCM) having anti corrosive & conductive properly with 50 kgs. activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (From electrode terminal to switch board, cost of 25x3 G.I. strip will be extra). Make : As approved in U.P. P.W.D. & C.P.R.I. certified. PWD SOR 2018 S.I. No. 725-B |
| 13 | Supplying and laying of 63 mm Dia DWC HDPE pipe complete with laying under ground with cartage labour complete in all respect. including excavation and refilling the trench PSR |
| 14 | SITC Mono colour (as approved by MVDA) Minimum 24 W with limen package of 50 lm per watt minimum - ground with symmetrical liminaire made up of dia-casting front ring should be made up of strinless steel minimum 304 grade front ring with silicon black gasket and toughened clear glass diffuser. Beam shall be within range of 15 to 40 deg. the ingress protection in IP 66 and impact resistance of IK08. The liminaire shall be integrated with high power COB with CRI 70 SDCM - 3, L70/B10 @ 60000 Hrs. inclusive of Monkey Protection Cage, cartage, Labour, CP with onsite 05 year warranty etc as per direction and approval of E/I |
| 15 | S&F of 16 Amp. 415 V metal clad TPN HRC type switch fuse unit complete with HRC fuse on angle iron bracket complete in all respect.Cat. B . SOR 2018 Sl. 325 |
| 16 | Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. PWD SOR 2018 S.I. No. 717 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender