Tender For Electrification Work (Ht Connection) For The Musical Fountain (Light & Sound Show) Installed At Keshav Vatika, Within The Shri Krishna Janam Sthan Premises.
Tender Value
26.18 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
7 days left
EMD
1.31 Lakhs
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mathura → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Electrification Work (Ht Connection) For The Musical Fountain (Light & Sound Show) Installed At Keshav Vatika, Within The Shri Krishna Janam Sthan Premises.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 400 sq. mm 3-1/2 core PWD SOR 2018 Si No. 501(T) |
| 2 | Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc. 120 sq. mm 3 core PWD SOR 2018 Si No. 506(F) |
| 3 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 400 sq. mm PWD SOR 2018 Si No.504(O) |
| 4 | Providing, erecting, testing & commissioning approved make oil immersed naturally ONAN cooled, double wound, core type outdoor copper wound 11 kV/ 433 Volts Step Down Transformer of following capacities operating on 3 phase, 50 Hz 4 wire & neutral earthed system continuously rated for a full temperature rise in oil following capacities operating on 3 phase, 50 Hz 4 wire & neutral earthed and Off Circuit Tap Changer continuously rated for a full temperature rise in oil not exceeding 40 deg. Cat maximum ambient temp. Of 50 deg. C complete with necessary radiator first filling of new transformer oil & standard fitting as below complying with I.S. 1180 LEVEL 2 standards On load tap changing range steps -10% to 5% on H.V in steps of 2.50% .and L.V. for variation should be provided The H.V. shall be connected delta & secondary with star connection. The transformer should have cable-end boxes on H.T. side & on L.T. side suitable for bus duct or cables as per requirement complete with test certificates from manufacturers. Losses As per IS 1180 LEVEL-2, including the cost of Foundation of required size, with brick work, plastering of foundation and soil filling with PCC etc, as per direction and approval of E/I complete in all respect. 1. Coservator with plain oil level gauge and oil drain plug Inos.Top filter valve 1 Nos. Bottom filter-Cum-drain valave 1Nos.. Rating and diagram plate Inos. Earthing Terminals 2Nos. Thermometer pockets 1Nos.Lifting Lugs 2/4 Nos. Air release plug 2/4 Nos. Bi-directional rollers 4Nos. Jacking pads 1Nos. Presure relese valve 1Nos. Separate Bare LV neutral 433V Detachable/Fixed type radiators 1Nos. Magnet Oil level gauge. Oil temperature indicator 1Nos. Winding temperature indicator 1Nos. Marshlig Box single window 1No. Double flot buchholz's relaywith alarm and trip contact. COPPER WOUND 400KVA 11/433V |
| 5 | Supply and fixing of 11KV HT VCB OUTGOING PANEL |
| 6 | Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required: 120 Sqmm. DSR 2022 Si No. 10.5.2 |
| 7 | Supply and Fixing of meter room of size 8x8 feet, 9 mtr. High suitable for placement of Cubical meter with 40 mm Square pipe and sheet of required size gauge with nut and bolt balding for HV connection including proper vantilation door etc complete in all respect as per direction of E/I. MR. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender