Tender For Repair/Renovation Of Panchayat Ghar Chuntiwari A Block:- Machil Pri 2026-27 Under Adf Pri
Tender Value
2.50 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
2 days left
EMD
7500
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Renovation Of Panchayat Ghar Chuntiwari A Block:- Machil Pri 2026-27 Under Adf Pri
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. ( exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 2 | P/l of stone soling , hand packed complete inclusive of all leads , lifts , loading, unloading cost and carriage of materials from approved nearest source to site of work |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 1:6 cement mortor |
| 5 | Dry random rubble masonry with hard stone |
| 6 | Providing /laying in position specified grade of reinforced cement conncrete .all work upto plinth level in 1:2:4 |
| 7 | Reinforced for RCC work including straightening ,cutting,bending all complete |
| 8 | Providing/fixing MS Grill of required patternin frames of windows etc with ms flat ,square or round bars etc ,including priming coat all complete |
| 9 | P/f of structural steel in single section for trusses, railing etc |
| 10 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel |
| 11 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, s |
| 12 | Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. 14.79.1 Long pattern W.C Pan of size 580x440 mm |
| 13 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and s |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary |
| 15 | Providing and fixing Geyser 25 litre of approved quality (Jaquar, Havells, venus or equivalent as approved by engineer incharge. |
| 16 | Providing and fixing of stainless steel kitchen sink of approved brand and manufacture of size 24x18 inch including making all connections excluding cost of fittings |
| 17 | Providing and fixing CP connections 18 inch |
| 18 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make (Hindware, Cera, jaquar or like) conforming to IS : 8931 |
| 19 | P/F of 600x450mm bevelled mirror of superior glass (of approved quality) complete with 6 mm thick hard board fixed to wooded cleats with CP brass screws & washers complete. |
| 20 | Providing and fixing bib cock approved quality as approved by engineer incharge. |
| 21 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 22 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms |
| 23 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: |
| 24 | P/F of heating point (One heating point shall include wiring for lighting points in 2.5 sqmm PVC insulated copper wire & 4 sqmm PVC insulated multi strand copper wire for lighting sub |
| 25 | P/F of Lighting point (one lighting point shall include wiring fort lighting point in 1.5 sqmm PVC insulatede copper wire & 2.5 sqmm PVC insulated multi stranded coppe |
| 26 | Sand/Bajri from for an average mechanical lead of 10 km and manual lead of 100m. |
| 27 | Carriage of stones by mt of 25km |
| 28 | Cib and Photos Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender